Capillary tubes

For intraEND micropipettes.

Comply with BS 4316-68 and DIN ISO 12 772 specifications. For use in microhaematocrit centrifuges. Without calibration marks. CE marked according to guideline EU IVDR 2017/746.

Heparinised: For capillary blood sampling. The entire inner surface is coated with sodium-heparinate. Code: red.

Non-heparinised: To determine heparinised venous blood. Code: blue.

Length:	75 mm ±0.5 mm
Wall thickness:	approx. 0.2 mm
Internal diameter:	1.1 to 1.2 mm
External diameter:	1.5 to 1.6 mm

Accessories Haematocrit sealing compound Alternative Haematocrit capillary tubes

Minicaps^® micro capillary pipettes, end-to-end. Declaration of conformity acc. to DIN 12600. Acc. to German calibration regulations. With batch number on the packaging. Made in Germany from DURAN^®.Acc. to ISO 7550.

• Error-free filling end-to-end
• Easy-to-remove with color-coded dispenser cap

Supplied in drums of 100 within an outer pack of 1000.
Non-heparinized. Declaration of conformity acc. to DIN 12600, ISO 7550.

Accessories Pipetting aid, intraEnd

• Blaubrand^®
• DIN ISO 7550
• DE-M marking for volumes greater than 5 µl, according to calibration regulations
• Calibrated to contain (IN)
• Colour code according to ISO for clear identification
• CE marked according to guideline EU IVDR 2017/746

Accessories Pipette holders Alternative

Disposable capillary pipettes with ring marks. ringcaps^® are exclusively made out of DURAN^® glass. The accurately designed ring mark guarantees precise determination of volume, the international color code on every single micropipette prevents the risk of confusion.
Unit = 1 box of 250 pieces.
Version 100 + 200 = 1 box of 100 pieces.

Advantages:

• No risk of cross contamination owing to single use
• DURAN^® glass
• Handy length of 125mm
• Declaration of conformity acc. to DIN 12600

Minicaps^® micro capillary pipettes, end-to-end. Declaration of conformity acc. to DIN 12600. Acc. to German calibration regulations. With batch number on the packaging. Made in Germany from DURAN^®.Acc. to ISO 7550.

• Error-free filling end-to-end
• Easy-to-remove with color-coded dispenser cap

Supplied in drums of 100 within an outer pack of 1000.
Suitable for the analysis acc. to Prof. Dr. Delbrück. Sodium heparinized. Declaration of conformity acc. to DIN 12600, ISO 7550.

Disposable capillaries for blood centrifugation tests, length 75mm, with heavy wall thickness and color-coded acc. to DIN 12 772.

Accessories Haematocrit sealing compound Alternative Micro-haematocrit capillary tubes

For Blaubrand^® intraEnd micropipettes.
Consists of the PET plastic tube, silicone adapter, and TPE suction bellows with venting hole.

Non-drying vinyl plastic compound on a plastic plate. For rapid and safe sealing of micro-haematocrit capillaries. 24 capillaries can be placed upright in the numbered storage places on each side of the plate. CE marked according to guideline EU IVDR 2017/746.

Polyethylene Glycol (PEG) in a SolGel matrix. Suitable replacement for: DB-Wax, Rtx- Wax, Stabilwax, HP20M, HP-Wax, HP-INNOWax, Supelcowax-10, AT-Wax, Nukol, CP, Wax 52CB, VB-WAX, ZB-WAX.

• Robust high-temperature column.
• Polar phase
• Low bleed and inert

Minicaps^® micro capillary pipettes, end-to-end. Declaration of conformity acc. to DIN 12600. Acc. to German calibration regulations. With batch number on the packaging. Made in Germany from DURAN^®.Acc. to ISO 7550.

• Error-free filling end-to-end
• Easy-to-remove with color-coded dispenser cap

Supplied in drums of 100 within an outer pack of 1000.
Sodium heparinized. Declaration of conformity acc. to DIN 12600, ISO 7550.

Other sizes available on request.

For blood gas analysis. LOT No. and expiration date printed on package. Acc. to IVD 98/79 EG.

Polyethylene Glycol phase. GC column for analyses such as alcohol, free acids, fatty acid methyl esters, aromatics, solvents and essential oils. Suitable replacement for: Carbowax 20M, CP-Wax 52 CB, DB-WAX, Elite-WAX, HP-20M, HP-INNOWax RH-WAX, Rtx-Wax, Stabilwax, SUPELCOWAX 10, TG-WaxMS, VF-WAXms, ZB-WAX.

• Industry standard wax column
• Polar phase

50% Phenyl Polysilphenylene-siloxane. For a range of EPA methods (604, 608, 8060, 8081), pharmaceutical applications, triazines, herbicides and steroids. Suitable replacement for: OV-17, SP-2250, DB-17, DB-17ms, DB-17ht, Rtx-50, SPB-50, HP-50+, HP-17.

100% Dimethyl Polysiloxane. General purpose GC column for all routine analyses such as hydrocarbons, aromatics, pesticides, phenol, herbicides and amines. Suitable replacement for: DB-1, DB-Petro, HP-1, HP-1MS, Rtx-1, Ultra-1, SPB-1, SPB-1 Sulfur, Petrocol DH, CP-Sil 5CB, VB-1, ZB-1, VF-1ms.

• Low bleed
• Non-polar

5% Phenyl Polysilphenylene-siloxane. General purpose GC column for routine gas chromatographic analysis. Suitable replacement for: DB-5, DB-5ms, DB-5.625, XTI-5, Rtx-5ms, Ultra-2, HP-5, HP-5MS, HP5-TA, SPB-5, MDN-5S, CP-Sil8CB, Rxt-Sil 5MS, AT-5ms, VB-5, ZB-5, VF-5ms.

• Very low bleed
• Non-polar
• Extremely inert

Capillary Tubes are made of borosilicate glass. A partial immersion thermometer, calibrated for 75 mm, is specified in most methods for the determination of melting points.

Alternative Melting point tubes Alternative  Alternative  Alternative

Sodium heparinized. According to DIN ISO 7550.