-
- General laboratory consumables
- Occupational safety, Security
- Analytical measurement and testing
- Stirring, Shaking, Mixing
- Sample preparation
- Distillation, separation, filtration
- Heating and cooling technology
- Liquid Handling
- Vacuum technology, Drying, Dry storage
- Optical instruments and microscopes
- Cleaning and sterilisation
- Environmental-, soil-, water-, food analysis
- Chromatography
- Cleanroom
Vials, Septa
Micro-inserts for vials with wide opening, glass
The micro-inserts made of first hydrolytic class glass are suitable for
- Short thread vials ND9, with wide opening made of glass or plastic
- Screw neck vials ND10, with wide opening
- Crimp neck vials ND11, with wide opening
- Snap ring vials ND11, with wide opening
- Shell vials, with a nominal volume of 2 ml
Kits ND8
The LABSOLUTE® kits ND8 contain shrink-wrapped screw vials ND8 with small opening made of clear or amber first hydrolytic class glass and corresponding screw caps made of PP. In some cases, caps are already pre-screwed on the vials.
- Many kits are especially adjusted for use with an autosampler of one defined manufacturer
- Kits with pre-screwed seals reduce the risk of sample contamination
- Kits with pre-assembled micro inserts are available on request
With RedRubber / PTFE septa
Screw seals ND8 are made of PP and are supplied without or with fitted septa made of a variety of materials. They have a 8-425 thread, a 5.5 mm centre hole or are closed.
These septa are temperature-resistant from -40 °C to 110 °C and easier to penetrate and have lower particle formation than septa made of natural rubber....
Without septa
Crimp and headspace seals ND20 are made of aluminium and are supplied with fitted septa made of a variety of materials. There are the following different types of caps available:
Plain caps with a 10 mm center hole. These caps are suitable for standard applications. They are available in several colours on request....
With pure PTFE septa
Short thread screw seals ND9 are made of PP and are supplied with fitted septa made of a variety of materials. They have a 6 mm centre hole and are available in different colours. The screw caps are similar in shape to the crimp caps and are therefore also suitable for robotic handling.
These septa are temperature-resistant from -200 °C to 260 °C. They are very thin and hard and characterized by high analytical purity. However, they have less effective resealability properties and are therefore only suitable for single-injection applications....
With natural rubber / TEF septa
Crimp seals ND8 are made of aluminium. They are plain lacquered with a 4 mm hole and supplied with fitted septa made of a variety of materials.
These septa are temperature-resistant from -40 °C to 120 °C and ideal for multiple injections thanks to their excellent resealability properties....