portable pH meters

Leak-proof and robust pH probes for pH meters 205, 206-pH1 and 206-pH2, insensitive to contamination, with maintenance-free gel electrolyte and gel storage cap.

Specifications
pH range:	0…14
Accuracy:	±0.02
Resolution:	0.01

BLAUBRAND^®. DIN EN ISO 648. DE-M marking. Calibrated to deliver (TD, Ex).

The Elite ORP pocket tester features a simultaneous display of the Oxidation-Reduction-Potential (ORP) measurement with temperature. With leakproof, transparent wide-base cap for upright standing with fill line indicator.

• 1-push calibration
• Large 4-digit double line display
• Backlit graphic display
• Auto-hold readings
• Easy-to-operate, intuitive keypad
• Auto-off

Scope of supply:
Elite ORP: Tester incl. batteries, lanyard
Elite ORP Kit: Tester incl. batteries, laynard, soft carry case

Specifications
ORP/RMV: Resolution: Accuracy:	-1000 ... 1000 mV ±1 mV ±2 mV ± 1 LSD
Calibration Points:	1 point
Temperature: Resolution:	0 ... 60 °C 0.1 °C
Operating temperature: Relative humidity:	5 ... 45 °C 5 ... 85 %, non-condensing
Temperature compensation:	MTC
Dimensions (W x L x H): Weight:	200 x 45 x 36 mm 160 g
Power supply:	4 x AAA 1.5 V batteries
IP code:	IP 67

Flask carriers for Magnetic stirrers with or without handles as indicated.

For holding round flasks when used with magnetic stirrers. Made of anodised aluminium. Can be used up to max. 180 °C.

Fits on magnetic stirrers: RCT basic, RET basic, RH basic, RH basic white, RH digital, RH digital white, RET control-visc, RET control-visc white, IKA plate (RCT digital), C-MAG HS 7 control (only with adapter).

Please order the appropriate inlay for the designated flask size.

The testo 205 is a robust food penetration measuring instrument for temperature and pH values, with automatic temperature compensation. The robust penetration measurement tip is exchangeable and insenstitive to dirt thanks to the hole diaphragm.

• pH tip embedded in breakage-proof plastic
• Combined penetration tip with temperature probe
• Maintenance-free gel electrolyte
• Automatic final value recognition (auto-hold)
• 2-line, illuminated display

Scope of supply:
Set testo 205: Instrument, penetration probe, storage cap, belt and wall holder
Starter-Set testo 205: Instrument, penetration probe, 2 x 250 ml calibration bottles (pH 4 and 7), belt and wall holder, aluminium case

Specifications
pH range: Resolution: Accuracy:	0 ... 14 0.01 0.02 ±1 digit
pH calibration points:	1 ... 3 points
Temperature range:	0 ... 60 °C (short-term to 80 °C max. 5 min)
Resolution:	0.1 °C
Accuracy:	± 0.4 °C
Operating temperature:	0 ... 50 °C
Dimensions (W x D x H):	38 x 145 x 167 mm
Weight:	135 g
Power supply:	Incl. 4 x batteries LR44
IP code:	IP 65

Accessories Replacement probes for pH meters 205/206 Accessories Accessories for testo 205/206

Checks the quality and temperature of cooking oil. Can be used in hot oil up to 200 °C, the user is protected from heat. Value is visualised by coloured display backlight (red, yellow, green). Protrection class IP 65, water resistant.

Scope of supply: Cooking oil tester testo 270, reference oil, plastic case, calibration protocol, training card, instruction manual and batteries.

Specifications
Range:	0.0 … 40.0 % TPM
Accurracy:	±2 % TPM (40 … 190 °C)
Resolution:	0.5 % TPM (40 … 190 °C)
Dimensions (W x L x H):	300 x 170 x 50 mm
Power supply:	2 x AAA (Micro)

Glass microfibre filters are designed for prefiltration in order to protect against membrane fouling. Grade GF 92 is strengthened with an inorganic binder.

• Increased strength
• Temperature resistant up to 500 °C
• Medium filtration speed

The HQ Series is for water quality professionals who want to perform electrochemical analysis for field and lab environments.
They provide a true rugged, field-ready solution with on-screen, visual step-by-step operating guidance that provides users with confidence in reporting and managing their results. Unlike other field meters with basic user interfaces and without easily accessible data, the HQ Series secures, simplifies, and accelerates the complete measurement process for field users.

• Easy calibration
• Sensors designed for every application available

The HQ Series is for water quality professionals who want to perform electrochemical analysis for field and lab environments.
The new portable platform will allow you to collect intuitive, accurate measurements, manage data, and easily review results, while supplying an IP67 robustness rating. The meters provide a true rugged, field-ready solution with on-screen, visual step-by-step operating guidance that provides users with confidence in reporting and managing their results. Successful calibration has never been so simple.
Most measuring issues are due to incorrect calibration procedures. With the illustrated, step-by-step on-screen calibration and troubleshooting procedures, water quality professionals can succeed every time.
Unlike other fi eld meters with basic user interfaces and without easily accessible data, the HQ Series secures, simplifies, and accelerates the complete measurement process for field users.
The bundles includes the portable digital meter, the corresponding sensors including cable (1 m), a field case, a stand, a protective cover and the consumables suitable for the respective measurement.

Precision pH electrodes with plastic shaft and liquid electrolyte KCl 3 mol/l Ag+ free, with built-in temperature sensor NTC 30 kOhm. Cable length 1.5 m, SenTix^® 950-P wireless-ready.

Specifications
Temperature range:	0 ... 80 °C
pH range:	0 ... 14 pH
Length / diam.:	120 mm / 12 mm
Electrolyte:	KCl 3 mol/l Ag+ free
Diaphragm:	Ceramic
Membrane shape:	Cylinder
Membrane resistance at 25°C:	< 1GΩ

Laboratory pH meter for standard laboratory applications

Gaincheck^® performs a complete instrument check. At the touch of a button it not only checks electrical features, but also display and keypad. A short check after power-on automatically reviews efficiency of instrument functions.
Drycheck^® monitors electrode impedance and alerts to electrode dry-up even in stand-by mode.
Sensoface^® monitors the electrode performance and provides information on its condition, by evaluating zero point, transconductance and electrode impedance
Trueline^® delivers a calibrated analog line recorder signal
Calimatic^®, which automatically recognises the correct buffer, calibrates safely and easily at the touch of a button. EMC design protects instrument against electromagnetic interference. CE compliant and follows the EMC guidelines.

Case made of glass reinforced PA12, stainless steel cover, IP 54 protective system, ready for connection to ZU 6954 attachment stand. Alphanumeric display, 2 x 4 digits, 14 segment LED, character height 13 mm, 3 Sensoface status indicators.

Electrode monitoring

• Sensoface^®: Evaluates zero point, transconductance, response time and electrode impedance, good/average/poor optical display gives information on electrode condition, can be disabled.
• Drycheck^®: Monitors electrode impedance for dry-up, glass breakage and defective connections also in stand-by mode. Calibration timer monitors calibration intervals.

Instrument self-test system:

• Gaincheck^®: Tests electrode and memory data and monitors the measuring circuit and measurement value analysis. Results of all test stages are displayed.

Laboratory pH meter 766, includes mains cable and 3 year guarantee.
Laboratory pH meter 766 SET A, with mains cable and pH/Pt 1000 SE 101 combination electrode (Plastic, 110 mm).
Laboratory pH meter 766 SET B, with mains cable and pH/Pt 1000 SE 100 combination electrode (Glass, 165 mm).

Accessories  Accessories  Accessories  Accessories Temperature probes for Knick pH meter and conductivity meter 703

With many safety features making pH measurement easier and more reliable.

Fullcheck^® automatically checks instrument function from input socket to recorder output. Functional efficiency of the instrument can be documented as part of quality management in accordance with DIN EN ISO 9000 using a test print. Drycheck^® monitors electrode impedance and alerts to electrode dry-up, glass breakage and defective connections even in stand-by mode. Sensoface^® monitors the electrode performance and gives information on electrode condition, evaluating zero point, transductance, response time, electrode impedance and calibration intervals.

Trueline^® delivers a calibrated analog recorder signal (electrically isolated). Calimatic^® automatically recognises the correct buffer. EMC design protects instrument from electromagnetic interference. The 765 laboratory pH meter complies fully with NAMUR (German committee for measurement and control standards in the chemical industry) EMC recommendations.

Temperature compensation is either automatic with a Pt 100 or Pt 1000 sensor or manual. Data can be processed immediately by a computer via standard RS 232 interface. Direct output to a printer is also possible. Large, bright LED display enables simultaneous readout of 2 measured values, such as pH value and temperature.
Case made of glass reinforced PA, with non-rusting, stainless steel, IP 54 protection level cover, ready for connection of ZU 6954 electrode stand.
Alpahnumerical display, 2 x 4 digits, 14 segment, 13 mm characters, 3 Sensoface status indicators.

Interface:
RS 232 without control lines, galvanically isolated, printer or computer interface.

Printer control:
Via serial interface for ZU 0244 or other standard printers, printing at the touch of a button or via print interval timer 0.1 to 999.9 min.

Electrode monitoring:

• Sensoface^®:analysis of zero point, transductance, response time and electrode glass impedance, good/average/poor optical display for monitoring electrode condition can be disabled.
• Drycheck^®: Monitors electrode impedance and alerts to electrode dry-up, glass breakage and defective connections even in stand-by mode. Calibration timer monitors calibration interval.

Instrument self-test system:

• Fullcheck^®: tests all measurement electronics, including analogue output, segment and keyboard test in diagnostic mode, automatic short test after power-on, QM documentation print-outs according to DIN EN ISO 9000 retrievable in diagnostic mode or via interface (printer).

Laboratory pH meter 765, includes mains cable, electrode not included, 3 year guarantee.
Laboratory pH meter 765 SET, with electrode statistics (Opt. 347), pH/Pt 1000 SE 100 combination electrode, ZU 6954 attachment stand and ZU 6928 buffer set (no other optional ancillary equipment available).

Accessories Nominal electrode zero point/electrode slope option 346 for pH meter 765 Accessories  Accessories  Accessories  Accessories  Accessories  Accessories Temperature probes for Knick pH meter and conductivity meter 703

Robust and waterproof hand-held meter with data logger for field use. For measurements in drinking water, cooling / boiler water, waste water, pool water and surface water.

• Automatic temperature compensation
• Buffer recognition of Lovibond^® standards (pH 4.01 / 7.00 / 10.01) and buffers according to DIN 19266
• Choice between 1-, 2- or 3-point calibration
• Evaluation of the sensor quality after each calibration
• Alarm function with adjustable limits
• Auto hold function
• Battery status indicator
• Redox measurement in mV or mVH according to DIN 38404-6
• Data transfer and evaluation via software possible

Scope of supply:
SD 305 pH/ORP (Set 1): Instrument, protective covering with electrode holder, carrying case, pH/Temp. electrode Type 231, pH buffer solution (4.01 / 7.00 / 10.01), storage solution for pH/ORP electrodes, batteries, manual
SD 305 pH/ORP (Set 2): Instrument, protective covering with electrode holder, carrying case, pH/Temp. electrode Type 226, temperature probe Pt1000, pH buffer solution (4.01 / 7.00 / 10.01), storage solution for pH/ORP electrodes, batteries, manual
SD 305 pH/ORP (Set 3): Instrument, protective covering with electrode holder, carrying case, Redox electrode Type 242, temperature probe Pt1000, ORP control solution (470 mV), storage solution for pH/ORP electrodes, batteries, manual

Specifications
pH:	-2.000 ... 16.000
Accuracy:	± 0.005
Temperature:	-5.0 ... 150 °C
Accuracy:	± 0.2 °C
Redox (ORP):	-2000.0 ... 2000.0 mV
Accuracy:	± 0.05 % FS (mV or mVH)
Datalogger:	10000 Data sets automatically 1000 Data sets manually
Dimensions (W x D x H):	100 x 164 x 37 mm
Weight:	302 g
Power supply:	2 x AAA battery
IP code:	IP 67

Accessories Electrodes for pH/Redox meter SD305pH Accessories Calibration and Storage solutions for pH/Redox-Meter SD 305 pH

For use with electrodes having a zero point other than pH 7 and a slope other than 59.2 mV/pH. Nominal electrode zero point and nominal electrode slope is configurable.

Zero point:	pH 0 ... 14
Slope:	25 ... 61 mV/pH

Pages of paper with thread stitching. With easy-to-clean, waterproof polyethylene cover.

For ammonia ISE electrodes 9512BNWP and 9512HPBNWP.

pH electrodes with gel electrolyte, BNC plug and fixed cable. Incl. wetting cap.

The testo 206 series is ideally suited for applications in liquid and semi-solid media, especially in the food sector. The instruments stand out due to the combination of a pH immersion probe and a temperature probe for precise and fast temperature compensation. Thanks to the large volume of gel electrolyte and the dual wall diaphragm, the probe is leak-proof, maintenance-free, robust and insensitive to dirt. The protective cover TopSafe provides the instruments with the protection class IP 68.

• Built-in temperature sensor
• Maintenance-free gel electrolyte
• Robust, waterproof and dishwasher-safe protective cover
• Automatic final value recognition (Auto-hold)
• Two-line LCD display

Specially suited for fast pH checks in liquids.

Scope of supply:
testo 206-pH1: pH Meter, pH1 probe head, storage cap, protective cover TopSafe, belt and wall holder
Starter-Set testo 206-pH1: pH Meter, pH1 probe head, storage cap, protective cover TopSafe, 2 x 250 ml calibration bottles (pH 4 and 7) belt and wall holder, aluminium case

Specifications
pH range: Resolution: Accuracy:	0 ... 14 0.01 0.02 ±1 digit
pH calibration points:	1 ... 3 points
Operating temperature:	0 ... 60 °C
Dimensions (W x D x H):	33 x 20 x 197 mm (with sensor and TopSafe)
Power supply:	Incl. 1 x CR2032
Specifications
Temperature range:	0 ... 60 °C (short-term to 80 °C max. 5 min)
Resolution:	0.1 °C
Accuracy:	± 0.4 °C ± 1 digit
Weight:	69 g

Accessories Replacement probes for pH meters 205/206 Accessories Accessories for testo 205/206

The testo 206 series is ideally suited for applications in liquid and semi-solid media, especially in the food sector. The instruments stand out due to the combination of a pH immersion probe and a temperature probe for precise and fast temperature compensation. Thanks to the large volume of gel electrolyte and the dual wall diaphragm, the probe is leak-proof, maintenance-free, robust and insensitive to dirt. The protective cover TopSafe provides the instruments with the protection class IP 68.

• Built-in temperature sensor
• Maintenance-free gel electrolyte
• Robust, waterproof and dishwasher-safe protective cover
• Automatic final value recognition (Auto-hold)
• Two-line LCD display

Ideally suited for pH measurement in semi-solid and protein-rich foods such as jellies, creams, cheese, fruits etc.

Scope of supply:
testo 206-pH2: pH Meter, pH2 probe head, storage cap, protective cover TopSafe, belt and wall holder
Starter-Set testo 206-pH2: pH Meter, pH2 probe head, storage cap, protective cover TopSafe, 2 x 250 ml calibration bottles (pH 4 and 7), belt and wall holder, aluminium case

Specifications
pH range: Resolution: Accuracy:	0 ... 14 0.01 0.02 ±1 digit
pH calibration points:	1 ... 3 points
Operating temperature:	0 ... 60 °C
Dimensions (W x D x H):	33 x 20 x 197 mm (with sensor and TopSafe)
Power supply:	Incl. 1 x CR2032
Specifications
Temperature range:	0 ... 60 °C (short-term to 80 °C, max. 5 min)
Resolution:	0.1 °C
Accuracy:	± 0.4 °C ± 1 digit
Weight:	62 g

Accessories Replacement probes for pH meters 205/206 Accessories Accessories for testo 205/206

The testo 206 series is ideally suited for applications in liquid and semi-solid media, especially in the food sector. The instruments stand out due to the combination of a pH immersion probe and a temperature probe for precise and fast temperature compensation. Thanks to the large volume of gel electrolyte and the dual wall diaphragm, the probe is leak-proof, maintenance-free, robust and insensitive to dirt. The protective cover TopSafe provides the instruments with the protection class IP 68.

• Built-in temperature sensor
• Maintenance-free gel electrolyte
• Robust, waterproof and dishwasher-safe protective cover
• Automatic final value recognition (Auto-hold)
• Two-line LCD display

Universally applicable due to BNC socket, which enables the connection of different pH electrodes to the instrument.

Scope of supply: pH Meter with BNC interface, protective cover TopSafe, belt/wall holder

Please order electrodes separately.

Specifications
pH range: Resolution: Accuracy:	0 ... 14 0.01 0.02 ±1 digit
pH calibration points:	1 ... 3 points
Operating temperature:	0 ... 60 °C
Dimensions (W x D x H):	33 x 20 x 197 mm (with sensor and TopSafe)
Power supply:	Incl. 1 x CR2032
Specifications
Temperature range:	0 ... 80 °C (dependend on used pH electrode)
Resolution:	0.1 °C
Accuracy:	±0.4 °C ±1 digit
Weight:	69 g

Accessories pH electrodes for pH Meter testo 206-pH3 Accessories Accessories for testo 205/206

Robust, intuitive analyser for daily routine measurements in the laboratory and process. The device is operated with 4 AA batteries.

• Ergonomically optimised for use on site and in the laboratory
• High-contrast LCD display
• Memosens sensors and analogue pH sensors can be used
• Detachable sensor quiver protects against drying out and damage
• Display of sensor condition with Sensoface
• Calibration with automatic buffer recognition "Calimatic"
• Automatic detection of the temperature sensor
• With real-time clock

Scope of supply: pH meter, 4 x AA batteries, carrying strap, specific test report, operating instructions

Specifications
Input pH/mV (analogue):	pH socket, DIN 19 262 (13/4 mm)
pH:	-2 ... 16
mV:	-1300 ... 1300 mV
Temperature input:	2 x 4 mm diam. for integrated or separate temperature detector
Temperature with NTC 30 kΩ: Temperature with Pt 1000:	-20 ... 120 °C -40 ... 250 °C
Memosens pH input (ISFET):	M8 socket, 4 pins, for Memosens lab cable
pH:	-2.000 ... 16.000
mV:	-2000 ... 2000 mV
Temperature range:	-50 ... 250 °C
Dimensions (W x D x H):	132 x 156 x 30 mm
IP code:	IP 66 / 67 with pressure compensation

Alternative

The benchtop meters Thermo Scientific™ Orion™ Star Series are the ideal choice for dedicated pH testing in water, process, research and QA/QC samples. Get the information you need quickly and easily from the large, backlit graphic LCD display. Informative display shows pH/mV/RmV and temperature along with electrode status, time, date, sample ID, user ID and calibration points. For advanced users, features such as stability and averaging choices provide additional options.
Features and Benefits

• Anyone can use this meter with its plain language screen prompts, soft keys that update for easy selection and a multilanguage interface that supports English, Spanish, French, Italian, German and Chinese
• Don"t miss a reading: AUTO-READ™ locks in the stable reading on your screen, ready indicator alerts when readings are stable and timed reading gathers data in specific time intervals
• Up to 5 point pH calibration with automatic recognition for USA/NIST and DIN buffers
• Fix calibration errors without a complete recalibration with calibration editing
• Non-volatile memory holds up to 2000 data points with time and date stamp
• Stores up to 10 methods allow for customized procedures to differentiate between tests and/or users
• Easily transfer data and keep meter software up-to-date with the USB and RS232 ports and complimentary data analysis software
• Mix samples without a stir plate with direct control of the Orion Star stirrer probe (please oreder separately)
• Included electrode arm and newly-designed probe holder make it easier to maintain and place probes into samples
• Works with almost every AC power source with the included universal power adapter, or use four AA batteries (Batteries not included in delivery) to run the meter on DC power
• IP54-rated housing handles splashes and is wall-mountable if table space is a problem
• 3 year meter replacement warranty
• TÜV, FCC certified

A211 Supplied with:
pH meter with electrode arm, 8302BNUMD Orion ROSS Triode 3-in-1 pH/ATC refillable glass electrode, 810199 ROSS pH buffer kit (475 ml each pH 4, 7 and 10 buffer solution, storage and cleaning solution, pH electrode storage bottle), universal power adapter
A214 Supplied with:
Orion-Star A214 pH/ISE Benchtop Meter Kit with Electrode Stand with ross ph buffer kit
A215 Supplied with:
Orion-Star A215 pH/conductivity benchtop meter + electrode holder, 8157BNUMD ROSS Epoxy refillable pH/ATC triode, 013005MD DuraProbe Epoxy 4-Cell, conductivity cell, 810199 ROSS pH buffer kit, 011007 conductivity standard

Specifications
Measuring range pH:	-2.000 ... 20.000
Resolution: Relative accuracy: Calibration points: Calibration editing:	0.1; 0.01; 0.001 ± 0.002 Up to 5 Yes
Measuring range mV/Rel MV/ORP:	± 2000.0 mV
Resolution: Relative accuracy:	0.1 ± 0.2 mV or ± 0.05% of the measured value, larger value applies
EHORP Mode:	Yes
Measuring range Temperature:	-5 °C ... 105 °C
Resolution: Relative accuracy: Offset calibration:	0.1 ± 0.1 1 point
Datalogging:
Number of Datalogs:	2000 points with date and time
Datalog funcions:	Manual, ready (incl. AUTO-READ™), timed
Inputs:
pH Electrode: ATC Probe: Output:	BNC, reference pin 8-pin mini-DIN S232; USB
Power supply:	AC adapter (included) 100 ... 240 VAC
Battery: Battery life:	4 x AA batteries (optional) Approx. 800 hours

With fix mounted electrodes, optimised for various applications. For measuring pH value and temperature.

• One-button calibration function
• 1-3-point calibration available
• Hold function
• Clearly readable, split display
• Automatic temperature compensation (ATC)
• Hold function for current value
• High degree of protection IP 65
• Battery life >100 hours in continuous mode
• Battery status indicator
• Automatic switch-off

PH CHECK S: With insertion probe. E.g. suitable for measurements in meat, cheese, ham, semi-solid and solid media.
PH CHECK F: With flat electrode. For testing on surfaces and with small sample quantities, e.g. food, leather, paper, skin, agar plates.
PH CHECK G: With glass electrode. For general measuring tasks in liquids, especially suitable for aggressive media.

Scope of supply: pH measuring instrument, 2 button cells CR2032, container with storage solution

Specifications
pH range:	0 ... 14
pH resolution:	0.1
pH accuracy:	±0.1
Calibration points:	1 ... 3
Temperature range:	0 ... 60 °C
Temperature resolution:	0.5 °C
Temperature accuracy:	±1 °C
Permissible ambient temperature:	0 ... 50 °C
Dimensions (W x D x H):	35 x 20 x 225 mm
Weight:	69 g
Power supply:	2 x CR2032
IP code:	IP 65

Alternative WHEATON Vials®, borosilicate glass