Vials, Septa

Snap ring seals ND11 are made of PE and are supplied with fitted septa made of a variety of materials. They are available in a soft and hard version as well as in different colours. Snap ring seals are very easy to use, time-saving and inexpensive.

These septa are temperature-resistant from -60 °C to 200 °C and have better purity than septa made of natural rubber, butyl or red rubber. However, they have less effective resealability properties and are therefore more suitable for single-injection applications.

Septa with a double-sided PTFE coating show a very low particle formation during penetration.

Precision thread headspace vials ND18 made of clear and amber first hydrolytic class glass are a practical alternative to the corresponding crimp neck vials ND20. Thanks to its many thread turns, the precision thread ensures that the septum is pressed firmly against the glass neck, keeping the vial gas-tight.

The vials are suitable both for solid phase microextraction (SPME) and for headspace applications. They are especially used with autosamplers made by CTC Pal, Varian, Gerstel, Atas, Shimadzu and Agilent.

Snap ring seals ND11 are made of PE and are supplied with fitted septa made of a variety of materials. They are available in a soft and hard version as well as in different colours. Snap ring seals are very easy to use, time-saving and inexpensive.

These septa are temperature-resistant from -40 °C to 120 °C and ideal for multiple injections thanks to their excellent resealability properties.

Screw seals ND24 (EPA) are made of PP and are supplied with or without fitted septa made of a variety of materials. They have a 24-400 thread, a 15 mm centre hole or are closed.

Suitable septa with a diameter of 22 mm made of different materials are available on request.

Crimp seals ND11 are made of aluminium. They are clear or lacquered in different colours and have a 5.5 mm hole. They are supplied with fitted septa made of a variety of materials.

These septa with instrument manufacturer's quality are temperature-resistant from -40 °C to 110 °C. They are easier to penetrate and have lower particle formation than septa made of natural rubber.

Snap ring vials and micro-vials ND11 made of clear and amber first hydrolytic class glass can be used on almost all autosamplers and can also be used on equipment with robotic handling.

As an alternative to snap ring seals, snap ring vials and micro-vials, ND11 can also be sealed with crimp seals ND11 since the two snap ring lips together have the same height as a crimp neck.

Vials with snap ring seal are only recommended for HPLC.

The blue Push-On caps made of PE have a thinned penetration point, but no additional septum. They are an inexpensive alternative to crimp caps for non-critical applications.

The transparent PE caps are 9 x 5.9 mm and have a 4 mm centre hole.

Septa made of natural rubber are temperature-resistant from -40 °C to 120 °C and ideal for multiple injections thanks to their excellent resealability properties.

Screw seals ND24 (EPA) are made of PP and are supplied with or without fitted septa made of a variety of materials. They have a 24-400 thread, a 15 mm centre hole or are closed.

These septa are temperature-resistant from -60 °C to 200 °C and have better purity than septa made of natural rubber, butyl or red rubber. However they have less effective resealability properties and are therefore more suitable for single-injection applications.

Precision thread screw seals ND18 are made of metal and supplied with fitted septa made of a variety of materials. The hole size is selected so that the cap is suitable both for SPME and headspace applications. However, enough surface is left for the magnet to be able to transport a completely filled vial. The screw-on mechanism ensures that the cap always has a flat surface so that the bottle cannot fall from the magnet. Separation of the vial and cap for disposal after analysis is much easier than with crimp caps.

Closed caps in combination with precision thread screw vials ND18 are ideal for sample storage.

Precision thread screw seals are not suitable for item 7.616 139 !

Septa are temperature-resistant from -60 °C to 200 °C and have better purity than septa made of natural rubber or red rubber. However, they have less effective resealability properties and are therefore more suitable for single-injection applications.

Snap cap vials ND18/ND22 are made of clear third hydrolytic class glass. They are easy to handle and can be opened and sealed very quickly. Transparent PE caps have to be ordered separately.