Thermoshakers

The Eppendorf ThermoMixer C combines unique mixing performance with excellent temperature control to consistently guarantee complete, dependable and reproducible test results. Improve your assay results by mixing and incubating samples at the same time.

• Excellent mixing performance due to unique 2DMix-Control technology
• Prevent condensation and improve temperature homogeneity with the new ThermoTop
• Ergonomic design
• Eppendorf QuickRelease™ Technology for fast and simple block exchange of Eppendorf SmartBlocks™
• Highest flexibility thanks to broad choice of exchangeable SmartBlocks™
• Heating, mixing and cooling of all common tubes and microplates with a volume range of 5µl to 50ml

Now you can control the temperature of your samples with ease: The ThermoTop, with unique condensation protection technology, reliably prevents condensation formation on the tube lid and wall. It also improves temperature homogeneity. The Eppendorf ThermoTop does not have a cable connection. It is detected by the device as soon as it is positioned, via inductive signal transmission, and thermo-regulation starts automatically. The sample temperature is not affected: optimal sample protection with optimal reaction conditions produce optimal results.

Specifications
Temperature operation range:	min: 15°C below RT, max: +100°C
Temperature adjustable range:	+1 to +100°C
Accuracy / Resolution:	±0.5°C at +20 to +45 °C
Max. heating time:	6°C/min
Max. cooling time:	2.5°C/min between +100°C and RT
Shaking frequency:	300 to 3000rpm
Orbit:	3mm
Dimensions (W x D x H):	206 x 304 x 131mm
Capacity:	dependent on Eppendorf SmartBlock™
Weight:	6.2kg
Electrical heating power:	200W (max.)
Power supply:	220 - 240V ±10%, 50/60Hz

Accessories Exchangeable blocks Eppendorf SmartBlocks™ and accessories for Eppendorf ThermoMixer™ C and ThermoStat C Alternative Eppendorf ThermoMixer™ F0.5/F1.5/F2.0/FP

Exchangeable blocks:
Flexibility has never been this easy. Eppendorf offers a variety of SmartBlocks™ for tubes from 0.5ml to 50ml.

• Fast and simple block exchange due to Eppendorf Quick Release
• Optimized block design guarantees maximum temperature transfer to the sample

Transfer Racks:

• Autoclavable transport aid for tubes from 0.5 to 2.0 ml
• For transferring up to 24 tubes in / from the heating block at the same time
• Offers protection against burns when transferring hot samples

SmartExtender:
A heatable frame/attachment for mixer, with separate temperature control (3 °C above RT to 110 °C), for simultaneous operation at two different temperatures.

• Enables 2 incubations at the same time

Accessories Eppendorf ThermoMixer™ F0.5/F1.5/F2.0/FP Accessories Eppendorf ThermoMixer C Accessories Cooling / Heating block Eppendorf ThermoStat C

By combining the mixing operation with the incubation phase, reaction process times and operator workload are reduced and efficiency of many procedures is increased, resulting in a higher throughput.

• temperature range: +5 to 100 °C
• uniformity at 37 °C: ± 0.1°C
• shaking speed: 250rpm to 1400 rpm
• timed shaking operation: 1 min to 96 hours
• rapid heat-up
• continuous or timed operation, with alarm buzzer and automatic switch-off facility
• incl. interchangeable block
• mixing and incubation phases are combined reducing reaction processing times

Scope of supply: Thermoshaker with one block as indicated. Further blocks on request.

Accessories Accessory blocks for Microtube thermoshaker PHMT Alternative Block thermostats PCH-1 / PCH-2 / PCH-3 Alternative Microplate thermoshaker PHMP

Eppendorf ThermoTop^® with condens.protect^® technology avoids condensation and improves temperature uniformity.
Lid for Eppendorf Thermomixer ™ F1.5 and FP, for Eppendorf Smart Blocks ™ 0.5-2.0 mL, plates, PCR 96 and PCR 384

Accessories BlockThermostats TH 21 / TK 23 Accessories HeatingThermoMixer MHR 13 Accessories HeatingThermoMixer MHR 23 / MHL 23

Accessories Microtube thermoshaker PHMT

Accessories Thermoshaker PCMT for microtubes and PCR plates

The Block Thermostats are used for tempering of solutions in closed reaction tubes and plates. They stand out due to their high temperature accuracy as well as their various fields of application thanks to over 30 different exchangeable blocks.

Specifications Thermostats:	HeatingBlock TH 21 // Heating/CoolingBlock TK 23
Temperature operation range:	Amb. +3°C to +130°C // Amb. -16°C to +90°C
Temperature adjustable range:	0°C to +137°C // -10°C to +105°C
Accuracy/ resolution:	±0.1°C / 0.1°C // ±0.3°C / 0.1°C
Max. heating time:	9.5°C / min // 4°C / min
Max. cooling time:	-- // 7°C / min
Dimensions (W x D x H):	220 x 330 x 109mm // 220 x 330 x 144mm
Capacity:	2 exchangeable blocks (not included)
Weight (with block / blocks):	approx. 3.5kg // approx. 7.5kg
Electrical heating/ cooling power:	350W // 130W
Supply requirements:	230V, 50Hz
Easy Control // Smart Control:	Timer 19h 59min // 30 program steps

Accessories Exchangeable blocks for Thermomixers and BlockThermostats Accessories Accessories for ThermoMixers and BlockThermostats Successor  Alternative Digital Dry Bath AccuBlock™Mini Alternative Dry Baths, AccuBlock™ Alternative Block thermostats PCH-1 / PCH-2 / PCH-3 Alternative Block thermostats,QBD and QBH series Alternative Block Heaters, analogue and digital, BH-200 series Alternative

The Thermal Shakers and Cooling Thermal Shakers are designed for applications that require consistent and precise results. With heating, cooling and shaking capabilities. These shakers use interchangeable blocks to accommodate a wide variety of tubes and microplates. The easy-to-use, 4.3", colour, LCD touch screen allows the user to save and visibly track progress through the live status bar for five user defined programs, each with five individual steps. The unit's enhanced electronics and dual temperature sensors provide accurate, dependable temperature settings across the operating range.

• 4.3" colour LCD touch screen display provides an intuitive interface
• Rapid heating, cooling and high speed shaking ability
• Internal memory stores five separate 5-step programs, unlimited with USB
• Temperature ramp rate, 0.5 °C steps
• Single Point Calibration Mode
• Pulse Mode Feature
• Maximum Temperature Limiting Function
• Hot Top Indicator
• Audible Alarm

Scope of supply: Thermal Shaker incl. 1.5 ml block, clear rack and cover

Specifications
Temperature range Thermal Shaker:	4 °C above ambient up to 100 °C
Cooling Thermal Shaker:	17 °C below ambient up to 100 °C
Temperature Accuracy Thermal Shaker:	± 1 °C from 20 °C to 45 °C ± 2 °C above 45 °C
Cooling Thermal Shaker:	± 0,5 °C from 20 °C to 45 °C ± 2 °C below 20 °C and above 45 °C
Speed / Accuracy :	300 to 3000 rpm / ±2 %
Timer:	1 min to 99 h, 59 min
Orbit:	3 mm
Cooling rate above ambient: below ambient:	2 to 3 °C/min 0.5 to 1.0 °C/min
Heating rate:	5 °C/min
Permissible ambient conditions:	5 to 35 °C
Dimensions (L X W X H):	260 × 248 × 132 mm
Weight:	5.4 kg
Power supply:	230 V, 50/60 Hz

Accessories Blocks for Benchtop Shaking Incubators Accessories Accessories for Benchtop Shaking Incubators

For cooling, heating and mixing of samples.

Specifications	MKR 13 // MKR 23
Temperature operation range:	Amb. -16°C to +100°C // Amb. -11°C to +70°C
Temperature adjustable range:	-10°C to +105°C // 0°C to +80°C
Accuracy/resolution:	±0.1°C / 0.1°C // ± 0.3°C / 0.1°C
Max. heating time:	6°C / min // 3.5°C / min
Max. cooling time:	12°C / min // 6.5°C / min
Shaking frequency:	200 to 1500rpm // 200 to 1200rpm
Orbit:	3mm orbital
Dimensions (W x D x H):	220 x 330 x 144mm
Capacity:	1 exchangeable block // 2 exchangeable blocks (not included)
Weight (with block / blocks):	9kg // approx. 9.5kg
Electrical heating/cooling power:	130W // 200W
Supply requirements:	230V, 50Hz
Smart Control:	30 program steps, short mix, interval shaking

Alternative Microtube thermoshaker PHMT Alternative Microplate thermoshaker PHMP Alternative Shaking Incubators VorTemp™ 56 / 1550

To simplify lab routines. Whether work with regularly 0.5, 1.5 or 2.0 ml reaction vessels or plates (MTP and DWP) - the customized systems from Eppendorf offer the perfect solution for special applications. The devices combine precise heating and mixing with the highest stability, even at maximum mixing frequency. Mixing and incubation steps can be performed independently.

• For 24 reaction vessels or one microplate/deepwell plate
• Efficient mixing thanks to 2DMix-Control and anti-spill technology
• Simple and intuitive operation using predefined temperature keys (37 °C, 42 °C, 56 °C and 95 °C)
• Improved temperature homogeneity with the new ThermoTop

Specifications	FP//F0.5//F1.5//F2.0
Temperature operation range:	Min. 4 °C above RT, max. 100 °C
Temperature adjustable range:	1 °C/100 °C
Accuracy / Resolution:	±0.5°C at 20 ... 45 °C
Max. heating time:	18 °C/min//15 °C/min //11 °C/min//13 °C/min
Shaking frequency ThermoMixer™ F1.5/F2.0: Shaking frequency ThermoMixer™ FP/F0.5:	300 to 1500 rpm 300 to 2000 rpm
Orbit:	3 mm
Weight:	6.1 kg//6.2 kg//6.3 kg//6.3 kg
Electrical heating power:	200 W
Power supply:	220-240 V, 50/60 Hz

Accessories Exchangeable blocks Eppendorf SmartBlocks™ and accessories for Eppendorf ThermoMixer™ C and ThermoStat C Accessories Accessories for Eppendorf Thermomixer ™ Alternative Eppendorf ThermoMixer C

The right physical weight and fitting is important for high temperature accuracy inside the sample. All blocks are made out of temperature conductible aluminium. Customized blocks on request. All blocks are autoclavable.

Accessories BlockThermostats TH 21 / TK 23 Accessories HeatingThermoMixer MHR 13 Accessories HeatingThermoMixer MHR 23 / MHL 23

Extremely short heating rate.
Highest accuracy: max. 0.1°C deviation.

Specifications:
Temperature operation range:	Amb. +3°C to +130°C
Temperature adjustable range:	0°C to +137°C
Accuracy/ resolution:	±0.1°C / 0.1°C
Max. heating time:	11.5°C / min
Shaking frequency MHR 11: Shaking frequency MHR 13:	80rpm to 1500rpm 200rpm to 1500rpm
Orbit:	3mm orbital
Dimensions (W x D x H):	220 x 330 x 109mm
Capacity:	1 exchangeable block (not included)
Weight:	6.5kg
Electrical heating power:	200W
Supply requirements:	230V, 50Hz
Easy Control MHR 11:	Timer 19h 59min, slider for shaking frequency
Smart Control MHR 13:	30 program steps, short mix, interval shaking

Accessories Exchangeable blocks for Thermomixers and BlockThermostats Accessories Accessories for ThermoMixers and BlockThermostats Alternative Microtube thermoshaker PHMT Alternative Microplate thermoshaker PHMP Alternative Shaking Incubators VorTemp™ 56 / 1550

Our bestseller: universally applicable
Double capacity.

Specifications:
Temperature operation range:	Amb. +3°C to +130°C
Temperature adjustable range:	0°C to +137°C
Accuracy/ resolution:	±0.1°C / 0.1°C
Max. heating time:	9.5°C / min
Shaking frequency MHR 23: Shaking frequency MHL 23:	200rpm to 1500rpm 200rpm to 1300rpm
Orbit MHR 23: Orbit MHL 23:	3mm orbital 3mm linear
Dimensions (W x D x H):	220 x 330 x 109mm
Capacity:	2 exchangeable blocks (not included)
Weight:	7.0kg
Electrical heating power:	350W
Supply requirements:	230V, 50Hz
Smart Control:	30 program steps, short mix, interval shaking

Accessories Exchangeable blocks for Thermomixers and BlockThermostats Accessories Accessories for ThermoMixers and BlockThermostats Alternative Microtube thermoshaker PHMT Alternative Microplate thermoshaker PHMP Alternative Shaking Incubators VorTemp™ 56 / 1550

Variable speed, variable temperature heating and cooling thermoshaker with a choice of blocks for microtubes and microplates. The PCMT can cool down to 15°C below ambient temperature.

• Fast heat-up and cooling times
• Temperature setting range +4°C to +100°C
• Temperature control range 15°C below ambient to +100°C
• Shaking speed: 250 to 1400 rpm
• Temperature uniformity at 37°C: ±0.1°C
• Choice of 5 interchangable blocks
• orbit 2mm

Block is required and not included in delivery. Please order separately.

Applications:

• Genetic analyses, extraction of DNA, RNA and further sample preparation
• Biochemical studies of enzymatic reactions and processes
• Extraction of metabolites from cellular material

Accessories Accessory blocks for Thermoshaker PCMT Alternative Microtube thermoshaker PHMT Alternative Microplate thermoshaker PHMP Alternative Shaking Incubators VorTemp™ 56 / 1550

Powerful thermoshakers available for samples with smallest volumes, e.g. blood samples, pharmaceutical agents, DNA/RNA samples, DNA/RNA samples or Elisa assays. Without cross-contamination and with an optimal mixing result. Thermo shaker Orbital Δ + with heating / cooling function (cooling rate 2.5 K/min).

• Large and clear display with a convenient menu structure allows for intuitive operation
• Two different speed modes for optimal mixing
• Speed adjustment according to insert, attachment and filling volume
• Robust aluminum die cast housing

Specifications	Orbital Δ // Orbital Δ +
Temperature range:	ambient +5 ... 100 °C // ambient -15 ... 100 °C
Temperature control:	1 ±K
Uniformity:	0.5 °C
Orbit:	1.5 mm
Display: Programs: Timer:	TFT 2 1 s ... 6000 min
Capacity:	0.3 kg
Dimensions (W x D x H):	220 x 350 x 150 mm // 220 x 350 x 125 mm
Weight:	9.5 kg // 8.8 kg
Power consumption:	100 W
Power supply:	100 ... 240 V, 50/60 Hz
IP code:	IP 21

These Thermal Shakers are designed for heating and cooling applications that require consistent and precise high-speed shaking with dependable temperature control from 17 °C below ambient to 100 °C.

• Fast and accurate temperature control
• Cooling models reach temperatures down to 17 °C below ambient
• Touchscreen for simple operation and programming
• 6 different languages adjustable
• Easily create programs for repeat applications
• Storage for five separate, 5-step programs
• USB port for data logging to a USB stick
• Huge number of different blocks

Without blocks. Please order separately.

Motion:	Orbital, 3 mm
Speed Range:	300 ... 3000 rpm
Speed Accuracy:	± 2%
Temperature Accuracy ISTHBLHTS:	± 1 °C between 20 °C and 45 °C; ± 2 °C above 45 °C
Temperature Accuracy ISTHBLCTS:	± 0.5 °C between 20 °C and 45 °C; ± 2 °C below 20 °C and above 45 °C
Heating Rate:	5 °C/min
Cooling Rate:	Above ambient 2 - 3 °C/min, below ambient 0.5 - 1.0 °C/min
Timer:	1 second - 99 hours, 59 minutes
Capacity:	1 Thermal block
Working Environment:	5 °C – 35 °C, 80% relative humidity, non-condensing
Display:	10.9 cm color touchscreen LCD
Drive System:	Brushless DC Motor
Power:	230V, 0.9A, 50/60Hz
Power Consumption:	210 W

Accessories Blocks for Benchtop Shaking Incubators Accessories Accessories for Benchtop Shaking Incubators

The Enviro-Genie^® is an incubator, rotator, rocker and stirrer in one compact unit. It is ideal for the study of microorganisms and tissue cell growth under strictly controlled conditions of temperature and agitation. Peltier technology ensures high degree of accuracy, uniformity and stability.

• Crystal-clear backlit LCD displays all parameters at a glance
• Magnetic stainless steel platform may be easily set to rock or rotate almost any container
• Two low and high speed magnetic stirrers incorporated, with revers stirring
• A variety of accessories are available to provide maximum application versatility
• Chamber air is gently and continuously re-circulated ensuring temperature consistency and uniformity
• Shatterproof window allows for inspection of samples without disturbing chamber environment
• Optional available: Horizontal orbital attachment for Western Blots and maintaining cells or solutions in suspension
• With visible and audible alarm for temperature and time
• With RS232 port for data acquisition and remote operation
• Speed (rotation): 1 ... 35 rpm
• Speed (rocking): 2 ... 70 cylcles per min

Scope of supply: Incubator, 1 x magnetic platform, 1 x clip plate each for 10 to 13 mm, 15 to 17 mm, 28 to 30 mm tubes, 4 x bag mounting strips, 1 x non-skid tray, 1 x wire rack

Specifications
Speed (stirring): Speed (rotation): Speed (rocking)	1 ... 1000 rpm 1 ... 35 rpm 2 ... 70 cylcles per min
Chamber volume: Platform capacity: Stirring capacity:	24 l 4.5 kg 2 containers up to 1 l each
Temperature range: Resolution: Accuracy: Stability: Uniformity:	4 ... 75 °C 0.1 °C ±0.2 °C ±0.1 °C ±0.5 °C
Timer:	programmable up to 99 h
Overall dimensions (W x D x H): Internal dimensions (W x D x H):	622 x 495 x 366 mm 362 x 254 x 260 mm
Weight:	36 kg
Power supply:	230 V, 50/60 Hz

Accessories Accessories for Rotator Genie™ / Roto-Shake Genie® / Enviro-Genie®

Thermoshaker with exchangeable blocks for micro tubes and PCR plates. Heating and mixing can be performed both simultaneously or independently.

• LCD display
• Control up to 7 units with Bluetooth® technology
• Digital control of time, rotation speed and temperature
• Digital timer with sound alarm

Please order blocks seperately.

Speed control range:	250 ... 1400 rpm
Temperature range:	4 ... 100 °C
Temperature uniformity at 4°C:	± 0.6 °C
Temperature uniformity at 37°C:	± 0.1 °C
Temperature uniformity at 100°C:	± 0.3 °C
Timer:	1 min ... 96 h
Dimensions (W x D x H):	220 x 240 x 90 mm
Weight:	3.7 kg
Power supply:	100 ... 240 V, 50/60 Hz

Accessories Accessory blocks for Thermoshaker PCMT