Sample containers

Ideal for liquid specimen collection, transportation and storage.

• Ideally suited for liquid histological samples
• Container made of non-cytotoxic polypropylene
• Very solid quality
• Top and bottom gripping assures easy opening and closing when wearing gloves
• Half-transparency containers
• With graduation
• With label
• Leak proof

Transparent, pressure-resistant and unbreakable sample cup, ideal for collecting and storing samples of all types. Can be ordered with and without screw cap.

• Graduated
• Solid and stable
• Writing field on the cup and labeling area on the lid
• Wide opening for easy and safe filling
• Fluid tight sealing screw cap with thread

Whirl-Pak^® bags are sterile polyethylene laboratory sample bags used to transport samples for biological testing and other applications. Available with or without write-on label. With integrated wire closing system. Temperature range: -210 to 82 °C.

• Sterile, solid bags for the homogenisation of liquids and solids
• With and without labelling strips

Easy sample handling due to the specially gusseted bottom which flattens out when the sample is placed inside, allowing the bag to stand up on its own. It works just like a bottle or beaker, however it cost less, is shatterproof and uses a fraction of the storage space. The integrated wire closing system ensures the tightness of the sample bag. With write-on label for clean and easy identification. Temperature range: -210 to 82 °C.

Transparent. For samples from chemistry, pharmaceutical, food technology applications etc.

• Sterile, RNase, DNase and pyrogen-free
• Leakproof

For environmental surface sampling of work areas and equipment. The natural cellulose dry sponge is free of bactericides and has been tested to be non-inhibitory.

Especially suitable for mud-sampling. Stainless steel beaker with reinforced rim. With adjustable click-in angle from 0 to 180°. For use with INGENIOUS telescopic poles.

All the bags use the same filter material. These special bags contain a third layer of finely perforated polyethylene, which filters out the solids in the sample when used in a homogeniser blender. This allows for easy pipetting of the sample. The hole diameter in the filter layer measures 0.33 mm and there are 285 holes per square cm. The filter is sealed into the perimeter of the bag on the sides and bottom, allowing the sample to be placed in the bag on either side. The liquid will transfer through the filter, but the solids stay on one side. With write-on lable. Temperature range: -210 to 82 °C.

• With white screw caps made of PP
• Liner Material metal foil
• Made of WHEATON 180 low potassium borosilicate glass
• High ultraviolet transmission

Scaled sampling tube manufactured in a clean room specially designed for disposable use. Due to the blue colour, it is also perfect for use in the food, animal feed and pharmaceutical industries. After sampling, the container can be closed and is leakproof. DispoDipper is completely manufactured in one piece and can be used for sampling and subsequent transport of the sample in one device. In this way, cross-contamination or sample impurities are almost impossible. For sampling, first remove the cover at the predetermined breaking point. Then take the sample with the sample container and close it securely. After sampling, the handle at the predetermined breaking point can be detached from the sample container. This allows for easy and space-saving transport of the sample.

• Individually packaged and optionally sterilised by gamma rays (SteriPlast^®)
• Production and packaging according to clean room class 7
• Complies with EU food requirements and FDA regulations

These gamma sterilised bottles are specially designed for taking, handling, transporting and storing water samples. Manufactured either as clear or amber colour from polypropylene. Clear bottles are manufactured from glass-like transparent special grade polypropylene. Amber bottles are manufactured from an amber coloured clear polypropylene which is higly translucent but still preventing the UV light penetrating inside the bottle. Square body form offers easy handling, and optimum space saving solutions during storage period. Wide bottle neck (GL 50) provides easy filling and pouring. Cap is made from PE with self sealing lock with integral security ring. Unique cap inner design ensures hermetical closure and guarantees an excellent leak and contamination proof bottle. Embossed graduation ( presicion of ±2% ) on side wall enables volume verifications. Each bottle is labelled specifying e.g. sample and source descriptions, code and lot numbers and expiry date.
Bottles with liquid sodium thiosulfate (20 mg/lt - acc to ISO/FIS 19458:2006 ) are ideal to analyse water meant for human consumption, swimming pools, and any other water where chlorine may modify the composition of the sample.
Empty bottles, without sodium thiosulfate ; ideal to sample water for physical and chemical analysis, as well as for other sample requirements that demands sterile bottles.

• Stand-up bag with bottom gusset
• Aluminium composite film made of PET, SPE, AL, SPE and PE (5-layer structure)
• Very good barrier properties against water vapor and oxygen
• Opaque
• Protection against the influence of UV radiation
• Temperature range: -40 °C ... 90 °C

The precise grinding of the glass plate and the lower part of the vessel enables a tight closure.

Screw cap for thread GL 45 made of PPS, freely turnable distributor body made of PTFE with female threads UNF ¼" 28 G for connecting capillary tubing (O. D. 3.2 mm) or a b.safe air valve with service life indicator.

Scope of supply:
Connections, fittings (PFA), blind fittings (PFA), air valve

These bags are specially designed for sampling chlorinated water for example for Legionella testing. Each sterile bag contains a nontoxic, nonnutritive tablet containing active sodium thiosulfate to neutralise chlorine at the time of collection. The bag is EPA approved and has the additional benefits of saving time, utility costs, storage space, disposal costs, and replacing sample containers. With Write-On strip for clean and easy identification. Temperature range: -210 to 82 °C.

Whirl-Pak® bags are sterile polyethylene laboratory sample bags used to transport samples for biological testing and other applications.
Temperature range -210 to 82 °C.
Made of black pigmented PE-film providing maximum protection for samples that are sensitive to light.

Sponges and swabs designed specifically for microbial surface sampling. 3M™ Sponge-Sticks are available in wet or dry formats, to fit many applications. The 1.5" x 3" 3M™ Sponge-Stick allows sampling without directly handling the sponge.

Whirl-Pak® bags are sterile polyethylene laboratory sample bags used to transport samples for biological testing and other applications.
Temperature range -210 to 82 °C.
With sterile scoop.

For environmental surface sampling of work areas and equipment. The natural cellulose dry sponge is free of bactericides and has been tested to be non-inhibitory.

• Flat bag with open bottom, sealable
• Aluminium composite film made of PET, SPE, AL, SPE and PE (5-layer structure)
• Opaque
• 2 bags of 50 pieces

White, high-impact polystyrene plastic.

• Individually sealed and sterilised in a polyethylene bag
• Long handle increases the distance between the hand and the sample
• Scoop is suitable for use as weighing boat
• Food-safe
• Lot stamped for accurate lot tracing
• Shipped with a Certificate of Processing for Sterilization
• Made from FDA grade materials

PS sample cup for analyzers.

Screw caps with free movable insert made of PTFE. Depending on the version, for connecting capillaries (O.D. 1.6/2.2/3.2 mm) and hose olives for tubing with I.D. 5.5 to 8 mm. A b.safe exhaust air filter can be screwed into the thread GL 14 (not included in the scope of supply).

Scope of supply:
Fittings, blind fittings (UNF 1/4"), blind fittings (NPT 1/8"), hose olives (NPT 1/8")

Zum Verschluss nicht genutzter Anschlüsse auf b.safe Caps und b.safe Waste Caps.