Spectrophotometers

High-quality and cost-efficient UV/VIS spectrophotometer for pharmaceutical, biochemical, and clinical lab applications. Suitable for different measurement types such as kinetics, wavelength scans, quantitative analysis, multi-wavelength, and DNA/Protein analysis. LLG-uniSPEC 2 is ideal for standard routine measurements.

The device can store and save 200 calibration curves. A pre-adjusted lamp design allows a fast and easy lamp replacement. Both lamps can be individually turned on/off to extend the durability. The device can be used either as stand-alone unit or can be operated via a PC by using the supplied software.

• Single beam system, grid with 1200 lines/mm
• Silicon photodiode detector
• Parallel port for printer output
• USB port
• 4 position cell holder (10 mm) included
• Additional cell holders optionally available
• LCD display
• Deuterium and tungsten lamp
• Automatic wavelength adjustment

Scope of supply: Spectrophotometer, software for connection to PC, 4 glass cells, 2 quartz cells, protective cover

Specifications	LLG-uniSPEC 2
Optical System:	Single beam, grating 1200 lines/mm, silicon photodiode detector
Wavelength range: Bandwidth:	190 ... 1100 nm 2 nm
Wavelength accuracy: Wavelength repeatability: Wavelength setting:	±0.5 nm 0.3 nm automatic
Photometric accuracy: Photometric repeatability: Photometric range:	±0.5 % T 0.3 % T -0.3-3 A, 0-200 %T, 0-9999 C
Stability: Stray light:	±0.002 A/h at 500 nm ≤0.1 % T at 220 nm, 360 nm
Data output: Printer port: Display:	USB port parallel port 128 x 64 Dots LCD
Standard cell holder: Lamps:	4-position 10 mm cell changer D2 lamp and W lamp

Accessories Accessories for Spectrophotometer LLG-uniSPEC Accessories LLG-Cuvettes Accessories Deuterium lamp for spectrophotometer LLG-uniSPEC

High-quality and cost-efficient UV/VIS spectrophotometer for pharmaceutical, biochemical, and clinical lab applications. Suitable for different measurement types such as kinetics, wavelength scans, quantitative analysis, multi-wavelength, and DNA/Protein analysis. LLG-uniSPEC 4 is ideal for complex measurements e.g. required for quality controls.

LLG-uniSPEC 4 features a small band width and a high wavelength accuracy. The device can store and save 200 calibration curves. A pre-adjusted lamp design allows a fast and easy lamp replacement. Both lamps can be individually turned on/off to extend the durability. The device can be used either as stand-alone unit or can be operated via a PC by using the supplied software.

• Single beam system, grid with 1200 lines/mm
• Silicon photodiode detector
• Parallel port for printer output
• USB port
• 4 position cell holder (10 mm) included
• Additional cell holders optionally available
• LCD display
• Deuterium and tungsten lamp
• Automatic wavelength adjustment

Scope of supply: Spectrophotometer, software for connection to PC, 4 glass cells, 2 quartz cells, protective cover

Specifications	LLG-uniSPEC 4
Optical System:	Single beam, grating 1200 lines/mm, silicon photodiode detector
Wavelength range: Bandwidth:	190 ... 1100 nm 1.8 nm
Wavelength accuracy: Wavelength repeatability: Wavelength setting:	±0.3 nm 0.2 nm automatic
Photometric accuracy: Photometric repeatability: Photometric range:	±0.3 % T 0.2 % T -0.3-3 A, 0-200 % T, 0-9999 C
Stability: Stray light:	±0.002 A/h at 500 nm ≤0.05 % T at 220 nm, 360 nm
Data output: Printer port: Display:	USB port parallel port 320 x 240 Dots LCD
Standard cell holder: Lamps:	4-position 10 mm cell changer D2 lamp and W lamp

Accessories LLG-Cuvettes Accessories Accessories for Spectrophotometer LLG-uniSPEC Accessories Deuterium lamp for spectrophotometer LLG-uniSPEC

LLG-uniSPEC 1 UV/VIS spectrophotometer is the ideal device for various routine laboratory applications including quality control, basic research and education. This high quality, accurate and cost-efficient unit is equipped with a large LCD display that shows standard curves and other test results.
LLG-uniSPEC 1 enables without software the measuring of absorption, transmission as well as concentration, and factor determination via standard curves. It can save 200 groups of data and display wavelength, absorbance and transmittance.
Optional software based on Windows 10 expand the application to kinetics, spectrum scanning and multi-wavelength measurements.

• Stand-alone unit with large 2.5” LCD Display
• Optional software for Windows 10
• Automatic wavelength setting
• Easy creation of standard curves for concentration determination
• Tungsten lamp and deuterium lamp reduce stray light which ensure high photometric accuracy
• USB and parallel port
• Large storage capacity of up to 200 groups of test results

Scope of supply: Spectrophotometer, dust cover, manual, 4 glass cuvettes, 2 quartz cuvettes

Optical system:	Single beam, grating 1200 lines/mm
Wavelength range:	190 ... 1000 nm
Bandwidth:	2 nm
Wavelength accuracy:	±2 nm
Wavelength repeatability:	0.5 nm
Wavelength setting:	Auto
Photometric accuracy:	±0.5 % T
Photometric repeatability:	≤0.2 % T
Photometric range:	-0.3 ... 3 A, 0 ... 200 % T, 0 ... 9999 C
Photometric mode:	T, A, C, F
Photometric stability:	≤0.002 A/30 min
Stray light:	≤0.1 % T
Display:	LCD, 128 x 64 Dots
Detector:	Silicon photodiode
Light source:	Tungsten and deuterium lamp
Output:	USB port, parallel port

Accessories LLG-Cuvettes Accessories Deuterium lamp for spectrophotometer LLG-uniSPEC Accessories Accessories for Spectrophotometer LLG-uniSPEC

The Implen NanoPhotometer® C40 UV/VIS spectrophotometer offers full scan data from 200- 900 nm for all cuvette based photometric applications in Life Sciences. It can be upgraded to nanovolume using the Implen Submicroliter Cell. The stand-alone design and small footprint make it ideal for lab bench operation. Optionally the instrument can be equipped with an integrated touchscreen and built-in battery. No recalibration is necessary over the entire lifetime.

Features & Benefits:

• Suitable for all cuvettes with outside dimensions 12.5 x 12.5 mm
• Temperature controlled cuvette port 37°C
• Measure time for full scan range: 2.5 seconds
• Preprogrammed applications for nucleic acids, proteins, protein assays, kinetics, OD600 and manual methods
• Sample control and blank control
• Control options: built-in 7" touchscreen (optionally), computer, smartphone and tablet
• Built-in file server and LIMS integration through REST API
• Made in Germany

Detection range:	dsDNA 0,1 ng/µl - 130 ng/µl
Detection range:	BSA 0,003 mg/ml - 3,7 mg/ml
Photometric range:	0 - 2,6 A
Center height (Z-Height):	8,5 mm
Built-in battery pack, operation time (optionally)	up to 8 hours
In & Output ports:	2x USB A, USB B, HDMI, Ethernet, Wi-Fi

The Implen NanoPhotometer® N120 UV/VIS spectrophotometer offers high-throughput measurements of up to 12 samples at once. It provides full scan data from 200- 900 nm for various Life Science applications like quantification of nucleic acids, proteins or cell cultures. The stand-alone design with an integrated touchscreen and small footprint makes it ideal for lab bench operation. Disturbing surface tension and evaporation effects are eliminated due the compression of the sample. No recalibration is necessary over the entire lifetime due to True Path Technology. Optional CFR21 software available for 21 CFR part 11 compliance for GxP environment is available.

Features & Benefits:

• Measure time for full scan range: 1.7 - 2.5 seconds
• Preprogrammed applications for nucleic acids, proteins, protein assays, kinetics, OD600 and manual methods
• Auto sample function starts automatically once sample arm is closed
• Sample control and Blank control
• Control options: built-in 7" touchscreen (optinally), computer, smartphone and tablet
• Built-in file server and LIMS integration through REST API
• Made in Germany

Sample number:	1 - 12
Detection range:	dsDNA 2ng/µl - 8,000 ng/µl
Detection range:	BSA 0,06 mg/ml - 230 mg/ml
Minimum sample size:	2,0 µl
Cuvette Performance:	0 - 2,6 A
Built-in battery pack, operation time (optionally):	up to 3 hours
In & Output ports:	2 x USB A, USB B, HDMI, Ethernet, Wi-Fi

The Implen NanoPhotometer® N60 UV/VIS spectrophotometer is ideal for nanovolume measurements of 0,3 - 2 µl samples. It provides full scan data from 200- 900 nm for various Life Science applications like quantification of nucleic acids, proteins or cell cultures. The stand-alone design with an integrated touchscreen (optional) and small footprint makes it ideal for lab bench operation. Disturbing surface tension and evaporation effects are eliminated due the compression of the sample. No recalibration is necessary over the entire lifetime due to True Path Technology.

Features & Benefits:

• Integrated Vortex for tubes up to 2.0 ml
• Measure time for full scan range: 2.5 - 4.0 seconds
• Preprogrammed applications for nucleic acids, proteins, protein assays, kinetics, OD600 and manual methods
• Auto sample function starts automatically once sample arm is closed
• Sample control and Blank control
• Control options: built-in 7" touchscreen (optinally), computer, smartphone and tablet
• Built-in file server and LIMS integration through REST API
• Made in Germany

Detection range:	dsDNA 1 ng/µl - 16,500 ng/µl
Detection range:	BSA 0,03 mg/ml - 478 mg/ml
Minimum sample size:	0,3 µl
Cuvette Performance:	0 - 2,6 A
Built-in battery pack, operation time (optionally):	up to 8 hours
In & Output-ports:	2 x USB A, USB B, HDMI, Ethernet, Wi-Fi

The flexible Implen NanoPhotometer® NP80 UV/VIS spectrophotometer offers both cuvette and nanovolume measurements. It provides full scan data from 200- 900 nm for various Life Science applications like quantification of nucleic acids, proteins or cell cultures. The stand-alone design with an integrated touchscreen (optional) and small footprint makes it ideal for lab bench operation. Disturbing surface tension and evaporation effects are eliminated due the compression of the sample. No recalibration is necessary over the entire lifetime due to True Path Technology.

Features & Benefits:

• Suitable for all cuvettes with outside dimensions 12.5 x 12.5 mm
• Temperature controlled cuvette port 37°C
• Integrated Vortex for tubes up to 2.0 mlo
• Measure time for full scan range: 2.5 - 4.0 seconds
• Preprogrammed applications for nucleic acids, proteins, protein assays, kinetics, OD600 and manual methods
• Auto sample function starts automatically once sample arm is closed
• Sample control and Blank control
• Control options: built-in 7" touchscreen (optinally), computer, smartphone and tablet
• Built-in file server and LIMS integration through REST API
• Made in Germany

Detection range:	dsDNA 1 ng/µl - 16,500 ng/µl
Detection range:	BSA 0,03 mg/ml - 478 mg/ml
Minimum sample Size:	0,3 µl
Cuvette Performance:	0 - 2,6 A
Built-in battery pack, operation time (optionally):	up to 8 hours
In & Output ports:	2x USB A, USB B,HDMI, Ethernet, Wi-Fi

Optical material:
QS: Quartz glass High Performance, wavelength range: 200 - 2500 nm.
OS: Special Optical Glass, wavelength range: 320 - 2500 nm.

Scanning spectrophotometers from Jenway for measurements in the visible and UV range.
Model 7200 (VIS): wavelength range of 335 to 800 nm with a spectral bandwidth of 7 nm.
Model 7205 (UV-VIS): wavelength range of 198 to 800 nm with a spectral bandwidth of 5 nm.

Both spectrophotometers are ideal for a variety of applications in education and routine testing in clinical, veterinary, pharmaceutical and QC laboratories.

The 72 series spectrophotometers offer measurement modes for single wavelength with basic absorbance and % transmittance; concentration determination (via reference standards or calibration curves with up to 6 standards), full spectrum scanning and kinetics for up to 3 simultaneous wavelength measurements.

The colour touchscreen user interface provides fast and easy set up and navigation of the instrument. The 4" display allows full spectrum scans, quantitation curves and kinetics runs to be viewed easily. The sample chamber lid can also be left open during measurements which is ideal for samples in tall test tubes.

Including two USB ports for data storage and printer connectivity.

Optional heated 10x10 mm cuvette holder for thermostated measurements at 37 °C. More accessories available on request.

• Scanning diode array detector (DAD)
• Colour Touchscreen navigation
• Small footprint and lightweight
• Fast scan speed
• Multiple USB ports for data storage and printer connectivity
• 2 years warranty on the instrument

Specifications Optical system:	Single beam
Wavelength Range: 7200 (VIS): 7205 (UV-VIS): Resolution Repeatability	335 to 800 nm 198 to 800 nm ± 2 nm ± 2 nm
Spectral bandwidth: 7200 (VIS): 7205 (UV-VIS):	7 nm 5 nm
Photometric range: Accuracy: Stability:	-0.300 to 2500 A ± 0.01 A at 1,0 A and 546 nm ± 0,005 A/h bei 0,04 A und 546 nm
Stray Light at 340 nm, %T:	< 1 % T acc. ANSI/ASTM E387-72
Concentration range: Quantitation:	± 2500 ± 2500
Kinetics:	15 bis 99999 s
Light source: 7200 (VIS): 7205 (UV-VIS):	Tungsten halogen lamp Xenon lamp
Outputs:	2 x USB
Dimension (W x D x H): Weight: Power supply: Warranty:	212 x 422 x 120 mm 2,8 kg 100-240 V, 50 / 60 Hz 2 Years

Accessories Printer for Melting point apparatus MP-800 / Spectralphotometers 7200, 7410, 7415, 7615 Accessories Cuvette holders for Jenway spectrophotometers

For accurate, fast and reproducible measurement of sample volumes from 0.5 µl to 5 µl. Programmed for the measurement of nucleic acid concentration and purity as well as protein assays. The direct application of the sample on the measuring head eliminates the need for cuvettes or sample dilution. Single measurements are performed in less than 6.5 seconds. Fast cleaning of the measuring optics simply by wiping off. Customized Android-based user interface to control the instrument, set measurement modes and retrieve results. Ethernet and USB interfaces for transfer of results, updates and printer connection as well as networking with cloud services.

• Ideal for DNA, RNA and protein determination
• Only 0.5 µl sample volume required
• For DNA concentrations up to 2 ng/µl
• 7" color touch screen
• Multilingual user interface
• 10 GB internal memory for methods and results
• 3 years warranty, also on the xenon lamp
• Stainless steel measuring head with quartz lens

Specifications
Wavelength range:	198 ... 1000 nm
Wavelength accuracy: Spectral bandwidth:	±2 nm 5 nm
Absorbance accuracy: Transmittance range:	±0.01 at 1.0 A 0 ... 199.9 %
Concentration range:	2 ... 6000 ng/µl dsDNA
DNA measurement modes:	dsDNA, ssDNA, RNA, Oligonucleotides, 260/280, 260/230, variable ratio
Protein measurement modes:	BCA, Bradford, Lowry, Biuret, direct UV
Light source:	Xenon lamp
Dimensions (W x D x H): Weight:	275 x 400 x 220 mm 7.7 kg
Power supply:	100 ... 240 V, 50 ... 60 Hz

Accessories Cuvette holders for Jenway spectrophotometers

Biodrop Duo is a service-free bench-top instrument with a cuvette holder and a micro-volume sample port. The port enables absorption measurements in just 0.5 µl sample volume without cuvettes. Ideal for rapid serial measurements of DNA, RNA or proteins. The cuvette holder offers the possibility for measurements with larger volumes with conventional 10 mm cuvettes. The instrument has a large colour touchscreen and preprogrammed applications for the measurement of DNA, RNA, oligos and proteins.
Generated data can be stored internally or transferred from the instrument using a USB flashdrive. The photometer can be operated with a PC and the supplied BioDrop Resolution Software via a USB connection. A built-in printer can also be selected for a complete stand-alone solution.

• Micro-volume sample port for minimum sample volume
• High-resolution, colour touchscreen
• Software package with preprogrammed methods for sample analysis
• USB connection for PC control and data export
• No calibration needed
• Easy cleaning of the sample port with a lint-free tissue

Specifications
Maximum concentration dsDNA:	2500 ng/µl
Detection limit:	1 ng/µl
Absorbance range:	0.3 to 2.5 A (0.3 A to 50 A, 10 mm equivalent)
Absorbance accuracy:	±0.005 A or 1 % of the reading, whichever is the greater at 546 nm
Spectral bandwidth:	5 nm
Stray light:	<0.5 %T at 220 nm and 340 nm using NaNO2
Wavelength range:	190 bis 1100 nm
Wavelength accuracy:	±2 nm
Light source:	Pulsed Xenon lamp
Dimensions (W x D x H):	260 x 420 x 185 mm
Weight:	3 kg
Power supply:	90-250 V, 50/60 Hz, max 50 VA

The Genova Nano micro-volume spectrophotometer measures small sample volumes as low as 0.5µl with a high degree of accuracy, reproducibility and speed. It has the ability to measure small sample volumes, conserves precious samples, reduces the need for dilutions and eliminates the requirement for cuvettes. Cleaning is quick and simple; wiping the read heads with a microfiber cloth removes all trace of the sample, allowing faster change over between samples and therefore increasing sample throughput.

Standard Spectrophotometer with all the functions of the 7315. With measurement modes for photometrics, concentration, multi-wavelength, spectrum scanning, quantitation and kinetics.
Life Science Spectrophotometer with all the functions of the Genova plus. With measurement modes for the measurement of nucleic acid purity, protein assays, nucleic acid concentration and optical density of cell cultures add to the flexibility of the Genova Nano.
Micro-volume Spectrophotometer: Making measurements easier, quicker and less strenuous for 0.2 to 0.5 µl samples.

• Ideal for DNA, RNA and Protein measurements
• Only 0.5µl sample volume required
• Purity scan over entire wavelength range, 198 to 1000nm
• Detects DNA concentrations as low as 2ng/µl
• Easy and quick to clean
• Results are reproducible, accurate and easily obtained
• Method and result saving to USB memory stick
• 3 year warranty including Xenon lamp

Specifications Optical system:	Single beam
Wavelength
Range: Accuracy:	198 to 1000nm ±2nm
Spectral Bandwidth: Path Length:	5nm 0.2 or 0.5mm (auto-ranging)
Photometrics
Absorbance Range: Absorbance Accuracy:	15 to 125A (10mm equivalent) ±2% at 260nm
Absorbance Precision:	<0.005A between 0 and 1A (at 260nm and 0.5mm)
Concentration/Quantitation
Maximum Concentration:	6000ng/µl (dsDNA) (at 0.2mm)
Detection Limit: Measurement Time:	2ng/µl (dsDNA) (at 0.5mm) <6.5 seconds
Minimum Sample Size: Maximum Sample Size:	0.5µl (at 0.2mm) 1.0µl (at 0.5mm) 5µl (in Nano mode)
DNA measurement modes:	dsDNA, ssDNA, RNA, Oligonucleotides, 260/280, 260/230, Variable ratio
Protein measurement modes:	BCA, Bradford, Lowry, Biuret, Direct UV
Dimensions (W x D x H):	275 x 400 x 220mm
Weight:	7.7kg

Accessories Cuvette holders for Jenway spectrophotometers Accessories Internal printer 660 101 for Jenway Spectrophotometers

The Genova Plus is a UV/visible spectrophotometer dedicated to life science analysis. This spectrophotometer allows the measurement of DNA concentration dsDNA, ssDNA, RNA, Oligonucleotides, 260 / 280, 260 / 230, Variable ratio, with an optional correction at 320 nm. The Genova Plus is pre-programmed with Bradford, Lowry, Biuret, BCA and Direct UV methods for protein analysis. The Genova Plus has an OD measurement mode enabling users to measure optical density at 600 nm for cell harvesting. The purity scan across the entire wavelength range from 198 nm to 1000 nm displays any distorted peaks enabling impurities to be easily identified. With the touch of a button the Genova plus can be converted to a standard spectrophotometer for basic scanning, quantitation, kinetics and multi-wavelength operations. 2 in 1 Spectrophotometer.

• Improved navigation system for easy and intuitive usability
• Improved optics
• Pre-programmed for DNA/RNA analysis
• DNA purity scan across entire wavelength range
• Protein methods pre-loaded
• Standard spectrophotometer functions
• Press to read xenon lamp
• Icon driven software
• Small footprint
• Save methods and results to USB memory stick
• 3 year warranty including xenon lamp

Scope of supply: Single micro-cuvette holder, USB memory stick, instruction manual, universal power supply

Optical system:	Single beam
Wavelength
Range:	198 ... 1000 nm
Wavelength repeatability:	±0.5 nm
Resolution:	1 nm
Accuracy:	±2 nm
Spectral bandwidth:	5 nm
Scan interval:	1, 2 and 5 nm
Photometrics
Absorbance range:	-0.300 ... 2.500 A
Transmittance range:	0 ... 199.9 %T
Photometric accuracy:	±1 %T, ±0.01 A at 1.000 Absorbance
Concentration / Quantitation
Range:	0 ... 9999
Resolution:	Selectable 1 / 0.1 / 0.01 / 0.001
Outputs:	USB, Analogue, RS-232, internal printer (optional)

Accessories Accessories for Spectrophotometer Genova Plus and 73 Series Accessories Cuvette holders for Jenway spectrophotometers Accessories Internal printer 660 101 for Jenway Spectrophotometers

Double beam spectrophotometer with a variable spectral bandwidth. The highly stable optics and two detectors measure the sample and reference simultaneously optimising measurement accuracy. The 6850 has measurement modes for photometrics, concentration, multi-wavelength, spectrum scanning, kinetics, quantitation, DNA/RNA and protein analysis. Jenway Prism PC software is supplied as standard and offers additional functionality with preloaded methods for DNA/RNA and protein analysis, as well as extensive post-measurement tools, unlimited results saving and easy export of data. The 6850 double beam spectrophotometer is ideal for quality control, general research, pharmaceutical, biochemical and clinical laboratory applications. Installation Qualification and Operation Qualification (IQ/OQ) is available for the 6850.

• Double beam spectrophotometer with highly stable optics
• Variable spectral bandwidth 0.5, 1, 2, 4, 5 nm
• Analysis: Auto peaks and valleys, zoom, addition, subtraction, peak ratios, smoothing, area under curve, wavelength table, derivatives, overlay with PC software
• Integrated user interface
• USB port for data storage
• Conforms to European Pharmacopeia requirements
• Jenway Prism PC software included as standard
• 1 year warranty

Specifications Optical system:	Double beam
Wavelength range: Resolution: Accuracy:	190 to 1100 nm 0.1 nm ± 0.3 nm (at 0.5 and 1 nm bandwidth) ± 0.5 nm (at 2, 4 and 5 nm bandwidth)
Reproducibility:	± 0.2 nm
Photometric range:	-0.3 to 3.0 A 0 to 200 %T
Accuracy:	± 0.002 A (0 to 0.5 A) ± 0.3 % T (0 to 100 %T)
Reproducibility:	±0.001 Abs (0 to 0.5 Abs) ±0.002 Abs (0.5 to 1.0 Abs)
Resolution: Stray light:	0.1 %T, 0.001 A < 0.05 %T at 220 and 360 nm
Concentration range: Quantitation points:	0 to 99999 Up to 3 wavelengths
Kinetics:	Up to 12 h with time intervals of 0.1, 0.2, 0.5, 1, 2, 5, 10 or 30 s
Spectrum: Scan Speed: Scan interval:	Any range between 190 and 1100 nm 100 to 2000 nm/min 0.1, 0.2, 0.5, 1, 2 or 5 nm
Light source:	Tungsten and Deuterium lamp
Outputs:	USB and parallel
Dimensions (W x D x H):	600 x 450 x 200 mm
Weight:	22 kg
Supply requirements:	230 V, 50/60 Hz

Models 6300 and 6305 are general purpose visible and UV/Visible range spectrophotometers which are suited to a wide range of applications in education and quality control.

• Simple operation
• Versatile sampling system
• G.L.P. compliant
• Full interfacing capability
• Simple keypad and operating protocols designed to enable reliable operation by unskilled operators
• LCD gives simultaneous readout of wavelength and photometric result
• Error messages, prompts, mode indication and a choice of concentration units are presented in an easily understood format
• Cuvette holder allows 10mm to 100mm cells
• 3 year warranty

Supplied with: Mains lead, pack 100 disposable cuvettes, 10 x 10mm cell holder, PC Application Software on CD-ROM and operating instructions.

Various accessories e.g. sipper pump, cells, cell holders, cuvettes and lamps available on request.

Specifications Optical system:	Single beam
Wavelength Range: Resolution: Accuracy: Bandwidth:	198 to 1000nm (6305) 320 to 1000nm (6300) 1nm ±2nm 8nm, 6nm over UV range
Transmittance Range: Resolution: Stray light: Accuracy:	0 to 199.9% 0.1% <0.5% at 340 & 220nm ± 1%
Absorbance Range: Resolution:	-0.300 to 1.999A 0.001A
Concentration Range: Resolution: Units:	-300 to 1999 0.1/1 ppm, mg/l, g/l, M, blank %
Outputs:	analogue (0 to 1999mV d.c.) RS232 serial port
Light Source:	Xenon flash lamp module (6305) Tungsten halogen (6300)
Dimensions (W x D x H): Weight:	365 x 272 x 160mm 6kg
Supply requirements:	230V/50Hz

Accessories Cuvette holders for Jenway spectrophotometers Alternative Spectrophotometer Models 7310 / 7315

Models 7300 and 7305 use icon driven software and have an improved navigation system for easy and intuitive usability. These instruments have measurement modes for absorbance, % transmittance and concentration. The 7300 and 7305 are easy to use and are ideal for use in education and general QC laboratories.

• Small footprint
• Autologging capabilities
• Press to read xenon lamp (7305)
• PC software included
• 3 year warranty

Supplied with: Mains lead, pack 100 disposable cuvettes, 10 mm x 10 mm cell holder, PC Application Software on CD-ROM and operating instructions.

Optical system:	Single beam
Wavelength
Range:	320 ... 1000 nm (7300) 198 ... 1000 nm (7305)
Resolution:	1 nm
Accuracy:	±2 nm
Bandwidth:	5 nm
Transmittance
Range:	0 ... 199.9 %
Resolution:	0.1 %
Stray light:	<0.5 %T
Accuracy:	±1 %
Absorbance:	-0.3 ... 2.5
Concentration
Range:	-300 ... 9999
Resolution:	Selectable 1/0.1/0.01/0.001
Outputs:	Analogue (0 to 1999 mV d.c.) RS232 serial port optional integrated printer

Accessories Cuvette holders for Jenway spectrophotometers Accessories Internal printer 660 101 for Jenway Spectrophotometers Accessories Accessories for Spectrophotometer Genova Plus and 73 Series Alternative Spectrophotometer Models 6300 VIS / 6305 UV-VIS Alternative Spectrophotometer Models 7310 / 7315

Models 7310 and 7315 use icon driven software and have an improved navigation system for easy and intuitive usability. These instrument have measurement modes for absorbance, % transmittance, concentration, scanning, kinetics and quantitation. The 7310 and 7315 are easy to use and are ideal for routine testing in clinical, veterinary, pharmaceutical and QC laboratories.

• Small footprint
• Autologging capabilities
• Press to read xenon lamp (7315)
• Result and method storage to USB memory stick
• PC software included
• 3 year warranty

Supplied with: Mains lead, pack 100 disposable cuvettes, 10 x 10mm cell holder, 2GB USB memory stick, interface cable, PC Application Software on CD-ROM and operating instructions.

Accessories available include an automatic 8 cell changer, Peltier, sipper pump, combined sipper Peltier pump, adjustable path length cuvette holders and micro-cuvette holders. Cuvettes and lamps are available on request.

Specifications Optical system:	Single beam
Wavelength Range: Resolution: Accuracy: Bandwidth:	320 to 1000nm (7310) 198 to 1000nm (7315) 1nm ± 2nm 5nm
Transmittance Range: Resolution: Stray light: Accuracy:	0 to 199.9% 0.1% <0.5%T ± 1%
Absorbance:	-0.3 to 2.500
Concentration: Range: Resolution: Calibration:	-300 to 9999 Selectable 1, 0.1, 0.01 or 0.001 Blank with a single standard or factor
Quantitation: Range: Resolution: Calibration: Curve fit algorithms:	-300 to 9999 Selectable 1, 0.1, 0.01 or 0.001 Blank with up to 6 standards Linear regression, interpolation, quadratic, quadratic through zero or linear regression through zero
Kinetics display:	Graphical rate of change, initial and final absorbance/%T and calculated concentration value against standard and factor
Spectrum: Scan Data Internal: Analysis:	320 to 1000nm (7310) 198 to 1000nm (7315) 1, 2 or 5nm selectable Absorbance and wavelength of peaks and troughs
Outputs:	USB, analogue and serial RS232, optional integrated printer
Supply requirements:	230V/50Hz

Accessories Cuvette holders for Jenway spectrophotometers Accessories Internal printer 660 101 for Jenway Spectrophotometers Accessories Accessories for Spectrophotometer Genova Plus and 73 Series Alternative Spectrophotometer Models 6300 VIS / 6305 UV-VIS

UV-VIS and VIS spectrophotometers with dual beam optics. The instruments benefit from a barcode test recognition system, over 150 pre-programmed analytical methods and automatic cuvette detection. Analytical quality assurance procedures include checks of the photometer, the total system (including methods) and sample matrix effects. Further functions of the spectrophotometers include measurement of transmission and absorbance, scanning of spectra, kinetics analysis and creation of user-defined methods.

• Premium optical system with reference beam
• Automatic test recognition with internal barcode reader
• Supports round cuvettes with 13, 16, 24 mm and rectangular cuvettes with 10, 20, 50 mm
• Automatic cuvette type detection
• More than 150 analytical methods implemented
• 7'' colour display and keypad
• Ethernet, USB
• 20 user profiles possible
• Up to 1000 user programmes
• Creation of up to 100 further user-defined methods
• Password protection possible

Specifications	XD 7000 VIS // XD 7500 UV-VIS
Optical System:	grid monochromator with reference beam
Wavelength range:	320 - 1100 nm // 190 - 1100 nm
Bandwidth:	4 nm
Wavelength accuracy:	±1 nm on all Holmium peaks
Wavelength repeatability:	better than 0.5 nm
Photometric range:	-3.3 to +3.3 Abs
Photometrical resolution / Transmission:	0.001 Abs / 0.1%
Photometric accuracy / repeatability:	0.003 Abs below 0.6 Abs 0.5 % from 0.6 to 2.0 Abs
Photometrical linearity:	<1% up to 2.0 Abs between 340 to 900 nm
Drift:	<0.005 Abs per hour after 15 minutes heat up time
Internal Storage:	40 MB for approx. 5000 data sets
Lamps:	Tungsten-halogen-lamp // Xenon flash lamp
Dimension (W x D x H): Weight:	422 x 323 x 195 mm approx. 4.5 kg
Power supply: Protection class:	100 - 240V, 50/60 Hz IP 30

Accessories Cuvettes for photometers Accessories Accessories for Lovibond® photometers

PS. Conical base. Sample cups for use in autoanalysers.

Thermo Scientific™ Orion™ AquaMate™ AQ7100 VIS and AQ8100 UV-VIS Spectrophotometers are designed to meet the specific needs of water and waste water analysis laboratories.

• 260 preprogrammed test methods, and flexibility to program your own custom methods
• For round, square and rectangular vial holders
• Intuitive operating software, including performance verification testing designed to meet GLP and GMP standards
• 7-inch, high-resolution glove-friendly touchscreen interface

Scope of supply:
AQ7100 VIS: Spectrophotometer with 7-inch color touchscreen, Tungsten-Halogen lamp, 12-25 mm round vial holder, 12 x 24 mm round vials, universal power supply (EU, UK), user guide, dust cover and USB cable

AQ8100 UV-VIS: Spectrophotometer with 7-inch color touchscreen, Xenon Flash Lamp, 12-25 mm round vial holder, 12 x 24 mm round vials, universal power supply (EU, UK), user guide, dust cover and USB cable

Specifications	AQ7100 Vis // AQ8100 UV-Vis
Optical system:	Dual beam
Wavelength Range:	325 ... 1100 nm // 190 ... 1100 nm
Spectral bandwidth:	5.0 nm // 2.0 nm
Accuracy:	0.5 nm
Light source:	Tungsten halogen lamp // Xenon Lamp
Outputs:	3 x USB
Dimensions:	385 x 355 x 195 mm
Weight:	7.5 kg
Power supply:	100 ... 240 V, 50 / 60 Hz
Warranty:	1 Year

The BioDrop µLite+ has a 0.5 mm microvolume sample port that enables absorbance measurements of 0.5 μl sample volume. The instrument has pre-programmed applications for the measurement of DNA, RNA, oligonucleotides, protein assays, OD600 and a comprehensive menu of common fluorescent dyes for nucleic acids and proteins. Generated data can be stored internally or on a USB stick. The photometer can be operated with a PC and the supplied BioDrop Resolution software.

• 7"-colour touchscreen
• No calibration needed
• Easy cleaning of the sample port with a lint-free tissue
• Optionally with integrated printer

Maximum concentration dsDNA:	2500 ng/μl
Detection limit:	1 ng/μl
Absorbance range:	-0,3 A ... 2,5 A
Absorbance accuracy:	±0.01 A + 1.5 % of the reading at 546 nm
Spectral bandwidth:	5 nm
Stray light:	<0.5 %T at 220 nm and 340 nm using NaNO2
Wavelength range:	190 bis 1100 nm
Wavelength accuracy:	±2 nm
Light source:	Pulsed Xenon lamp
Power supply:	120 ... 240 V, 50/60 Hz