Glass cuvettes

Filter

 LLG-Cuvettes

LLG

LLG-Cuvettes are most frequently used in analytical laboratories.

They have two clear windows, two side walls and are available as optical glass or quartz variants. The walls and the base are polished inside and frosted outside. The thickness of the windows and the base is 1.25 mm. The overall height of standard type cells is 45 mm or 48 mm for those fitted with a stopper. Each cuvette is supplied with a PTFE lid....

 LLG-Cuvette rack, PP

LLG

Ideal for storing up to 16 cuvettes with 10 mm width. Two-tier arrangement of the cuvette rows ensures clarity.

  • Numbered positions
  • Autoclavable at 121 °C
...

 Macro cells for absorption measurement, UV-range, quartz glass High Performance

Hellma

Quartz glass High Performance 200 - 2500 nm. Inside width 9.5 mm. Base thickness 1.5 mm.
Type A: with PTFE lid
Type B: with small glass lid
Type C: with regular glass lid
Type D: with PTFE stopper / from 40 mm with 2 PTFE stoppers...

 Cells for Absorption Measurement, Vis-range

Hellma

...

 Cells for Fluorescence Measurement, UV-range

Hellma

Wavelength Range: 200 nm - 2500 nm
Optical material: Quartz glass High Performance...

 Macro cells for absorption measurement, VIS-range, special optical glass

Hellma

Special optical glass 320 - 2500 nm. Inside width 9.5 mm. Base thickness 1.5 mm.
Type A: with PTFE-Falzdeckel
Type B: with small glass lid
Type C: with regular glass lid...

 Cells for Absorption Measurement, UV-range

Hellma

To maintain constant good measurement results, a regular review of the accuracy of the spectrophotometer is required. With the use of certified reference materials from Hellma Analytics, you make sure that your equipment qualifications meet the requirements of the pharmacopoeias and fulfill your internal quality requirements, at the same time you reach the international comparability of your measurement results. The certified reference materials (calibration standards) of the DIN EN ISO 17025 accredited Hellma Analytics calibration laboratory are traceable to the primary standards of NIST (National Institute of Standards and Technology) and meet the requirements of the major pharmacopoeias (e.g. EP, DAB, USP)....

 Standard Rectangular Cells

Starna

High precision standard cells for routine analysis. Suitable for most spectral photometers, using rectangular cells. Available with cover or with stopper for a liquid-tight seal. Cover and stopper made of PTFE.

Glass types
Type G: Optical glass, 334 to 2500 nm
Type SOG: Special optical glass, 320 to 2500 nm...

 Macro cells for absorption measurement, NIR-range, quartz glass Extended Range

Hellma

Quartz glass Extended Range, Wavelength range: 200 - 3500 nm. Inside width 9.5 mm. Base thickness 1.5 mm.
Type A: with PTFE lid
Type B: with small glass lid
Type D: with PTFE stopper / from 40 mm with 2 PTFE stoppers...

 Cells for Absorption Measurement, Flow-Through Measurement, UV-range

Hellma

Optical material:
QS: Quartz glass High Performance, wavelength range: 200 - 2500 nm.
OS: Special Optical Glass, wavelength range: 320 - 2500 nm....

 Ultra micro cells for absorption measurement, UV-range, quartz glass High Performance

Hellma

Quartz glass High Performance 200 - 2500 nm.
Type A: with PE stopper
Type B: open pipette tips...

 Secondary standards for calibrating spectrophotometers

Hellma

To maintain constant good measurement results, a regular review of the accuracy of the spectrophotometer is required. With the use of certified reference materials from Hellma Analytics, you make sure that your equipment qualifications meet the requirements of the pharmacopoeias and fulfill your internal quality requirements, at the same time you reach the international comparability of your measurement results. The certified reference materials (calibration standards) of the DIN EN ISO 17025 accredited Hellma Analytics calibration laboratory are traceable to the primary standards of NIST (National Institute of Standards and Technology) and meet the requirements of the major pharmacopoeias (e.g. EP, DAB, USP)....

 Cell storage container, Küvibox 2

schuett-biotec

Dust-proof, rigid container for storing clean cells. Accommodates cells up to 55mm in height. Cells are immediately ready for use when required.

Küvibox 1 holds up to 16 x 10mm path length cells
Küvibox 2 holds up to 8 x 10mm and up to 4 x 20mm path length cells....

 Cells for Absorption Measurement, NIR-range

Hellma

300 Wavelength Range: 200nm - 3500nm
Optical material: Quartz glass Extended Range...

 Cells for light scattering measurements, UV-range

Hellma

Wavelength: 200nm - 2500nm
Optical material: Quartz glass High Performance...

 Cells W600

Tintometer

Cells made of optical glass or Borosilicate glass 3.3, 21 mm x 40 mm, for instument Models Fs, PFXi/PFX195, 880, 950 and 995. (Note: PFXi/PFX-195 max. path length 50 mm).

W600/OG/xx for unheated samples (up to 40 °C)
W600/B/xx for heated samples (up to max. 100 °C)

Further versions available on request....

 Cells W680

Tintometer

Cells made of optical glass 17 mm x 75 mm, for Comparator 2000+ and Comparator 3000 using unheated samples (up to 40 °C).

Further versions available on request....

 Certified reference materials for qualifying spectrophotometer as a complete set

Hellma

To maintain constant good measurement results, a regular review of the accuracy of the spectrophotometer is required. With the use of certified reference materials from Hellma Analytics, you make sure that your equipment qualifications meet the requirements of the pharmacopoeias and fulfill your internal quality requirements, at the same time you reach the international comparability of your measurement results. The certified reference materials (calibration standards) of the DIN EN ISO 17025 accredited Hellma Analytics calibration laboratory are traceable to the primary standards of NIST (National Institute of Standards and Technology) and meet the requirements of the major pharmacopoeias (e.g. EP, DAB, USP)....

 Flow-through cells with two optical paths lengths, Absorption and Fluorescence Measurement

Hellma

Wavelength Range: 200nm - 2500nm
Optical material: Quartz glass High Performance...

 Micro plates, quartz glass

Hellma

96-well-plates. Quartz glass, with synthetic quartz glass base. Ideal for use with aggressive media, for UV-range measurements, in microscopy, or in fluorescence studies....

 Stoppers, natural rubber, with single hole

Deutsch & Neumann

Grey. DIN 12871....

 Mini cell washer, Vakuwasch

schuett-biotec

PE construction. Practically unbreakable. Glass cuvettes are washed and dried in a few seconds during one operating cycle, using a simple process. All that is required is a filter flask (with pierced rubber bung, 13 mm hole and pressure tubing) and a slight vacuum....

 Accessories NANOCOLOR®, Standard Rectangular Cuvettes

MACHEREY-NAGEL

...

 Cells for Photometer photoLab®

WTW

Cuvettes for photometric routine and water analytics in the UV-VIS and VIS range. Cells with matt side surface are suitable for the automatic cell detection of the photoLab ® filter and spectral photometer. The glass and quartz cuvettes have a marking in order to place the cuvettes into the photometer in the same direction for an even higher precision....

 Secondary standards for calibrating spectrophotometers

Hellma

To maintain constant good measurement results, a regular review of the accuracy of the spectrophotometer is required. With the use of certified reference materials from Hellma Analytics, you make sure that your equipment qualifications meet the requirements of the pharmacopoeias and fulfill your internal quality requirements, at the same time you reach the international comparability of your measurement results. The certified reference materials (calibration standards) of the DIN EN ISO 17025 accredited Hellma Analytics calibration laboratory are traceable to the primary standards of NIST (National Institute of Standards and Technology) and meet the requirements of the major pharmacopoeias (e.g. EP, DAB, USP)....

Add to shopping cart