Waste, Disposal bags

The blue LABSOLUTE® waste bags made from LDPE with a wall thickness of 35 µm are tear resistant, flexible and offer a wide range of applications. The red waste bags with a material thickness of 150 μm are ideal for medical practices, hospitals or laboratories to dispose hazardous waste. All LABSOLUTE® LDPE waste bags are made from 100 % recycled material.
The smaller waste bags with a volume of 30 and 60 l made from HDPE are perfect for small laboratory waste bins.

With the autoclavable bags made of PP, you can dispose of your contaminated labware. Thanks to the strong PP film (50 µm) and an extra broad seam at the bottom, the bags are particularly tear-resistant. The bag size 200 x 300 mm is delivered for both versions in a handy dispenser box.

Autoclavable at 121 °C. For autoclaving, the bags must only be slightly closed. Highly transparent.

With the autoclavable bags made of PP, you can dispose of your contaminated labware. Thanks to the strong PP film (50 µm) and an extra broad seam at the bottom, the bags are particularly tear-resistant. The bag size 200 x 300 mm is delivered for both versions in a handy dispenser box.

Autoclavable up to 134 °C. For autoclaving, the bags must only be slightly closed.

The LABSOLUTE® holder for disposables bags is made of steel wire and coated with a PE resin.

• With rubber feet
• Suitable for 200 x 300 mm disposable bags (7.696 994, 7.697 000)

For the disposal of contaminated labware. Film thickness approx. 50 µm, with a broad seam at the bottom. When autoclaving, the neck of the bag must be left open.

Autoclavable bags imprinted with biohazard labelling. Made of polypropylene. Strong side seams for securely holding items. Front write-on panel. Autoclavable.

For the disposal of contaminated labware. Film thickness approx. 50 µm, with a broad seam at the bottom. When autoclaving, the neck of the bag must be left open.

Autoclavable bags imprinted with biohazard labelling. Made of polypropylene. Strong side seams for securely holding items. Front write-on panel. Autoclavable.

The set includes bench top holder and 100 red bench top biohazard bags (HDPE). For collecting pipette tips and microcentrifuge tubes.

• Rectangular steel wire frame for polyethylene bags (22 x 28 cm, 0,018 mm thickness)
• Coated in easy to clean, orange color epoxy
• Snug fitting polypropylene plastic cover
• Autoclavable

For collecting and discarding used disposables.
Caution: Never put sharp objects such as needles into plastic bags. Risk of injury! Bags must be open during sterilisation. Please order stand separately.

• Autoclavable (134°C)
• Hot air sterilisation (at 180°C)

Disposal bags made of polypropylene foil for sterilisation in the steam autoclave. On request disposal bags are also available with imprint ”Biohazard“ if a sufficient number is ordered. For users of hot-air sterilisers, disposal bags made of polyamide are available for use up to +160 °C.

Properties:

• Ideal for the hygieni disposal of contaminated laboratory items

Nylon, flat, single use - cannot be reopened

Red. Polyethylene, round, can be reopened. Further colours available on request.

This hard to pierce pouch offers protection against the danger of being cut by contaminated sharp objects. After filling, the top flaps close and lock in place for safe disposal.

• Solid oval paperboard pouch
• Printed with bold biohazard symbol

Red. With pre-printed sterilization indicator patch, which darkens when bag is autoclaved.

• ASTM 1709 and ASTM 1922
• Can be autoclaved at 135°C
• Print: standard biohazard warning symbol
• Precautionary protocols in four languages: English, French, German and Spanish

Transparent. Sterilization patch darkens when subjected to steam sterilization.

• ASTM 1709 and ASTM 1922
• Autoclavable at 135 °C
• Standard biohazard warning symbol
• Precautionary procedures in four languages: English, French, German, and Spanish

Red-orange. With pre-printed sterilization indicator patch, which darkens when bag is autoclaved.

• Maximum protection against dangerous tears and leaks
• Material: blended polymer
• ASTM 1709 and ASTM 1922
• Autoclavable at 135 °C
• Print: standard biohazard warning symbol
• Precautionary procedures in four languages: English, French, German and Spanish

The smart, reusable bottle system for cell culture media preparation.
DURAN^® TILT is perfectly designed for making work in biosafety cabinets and clean hoods safer and easier. The innovative features of the DURAN^® TILT bottle changes everything. The TILT bottle has two positions: upright for filter sterilization or storage, and tilted at 45° for pipetting.

• The innovative design enables both good aseptic and ergonomic practice.
• The GL 56 mouth has a 100 % bigger opening than the standard GL 45 mouth for easier pipetting.
• The ergonomically shaped GL 56 screw cap is easy to open and close. Made from a non-cytotoxic polymer.
• Vacuum resistant glass bottle for the safe filter sterilisation of media.
• Space saving shape for fridge storage and warming media in a water bath
• Low bottle height is practical in the biosafety cabinet.
• Tilted volume indicators for convenience
• Manufactured from DURAN^® borosilicate 3.3 glass for reusability and lower whole life costs.

Plastic coated iron. With non-slip rubber feet.

HDPE. With adhesive strips. Can be fixed anywhere, e.g. walls and tables etc. Without holder. Carrying weight approx. 1.36 kg.

• ASTM 1709 and ASTM 1922
• Autoclavable (121 °C)