Transport, storage containers

Ideal for transporting biological and clinical samples, as well as instruments and products that you want to keep clean and dry under testing environmental conditions. Are light weight and easy to carry; they are ideal for moving samples that must be protected from humidity, dust and other environmental influence. The clarity of the DURAPorter™ enables the user to visibly check sample integrity, so that it can be opened using the right precautions.

• Polycarbonate construction are available in three colours for use/owner identification
• Silicone water-tight seal and three lid clasps provide secure closure
• Carry handle folds neatly into body space allowing the units to be stacked
• Lid opens a full 180°, allowing total access to contents and making it easier to clean
• Will accommodate 13 and 16 mm tubes in a 72-place one rack^®, or similar sized/brand of rack
• Use the separators provided to create your own compartment sizes, or use empty to transport larger products and equipment
• Autoclavable

PC. Completely autoclavable. Used to carry tubes and containers under safe conditions. With silicone gasket and 4 sidelocks. Provided with a stainless steel handle and user sheet with instructions approved by WHO. With bio-hazard symbol printed on the box.

Suitable for the S.C.A.T. safety system.

Please note: The containers can be grounded with a suitable grounding cable (4.005 653, please order separately).

Autoclavable. Compact storage box has angled front slot for easy access to tubes. Rugged, polypropylene box has durable three-point hinges, snapping clasp for secure closure, moulded grid lines on lid, imprinted coordinates on bottom of base and imprinted and raised coordinates on tube wells. Ideal for sample or case study storage.Holds 1.5 ml to 2.0 ml microtubes. Resist storage temperatures from -80 to 121 °C.

For safe storage, use and in-plant transports of flammable liquids. Explosion-proof by flame traps and pressure control valves. Metering devices are self-closing. From high quality and chemically resistant stainless steel 316, electro-polished, gaskets from PTFE, ergonomic handholds.

18/10 steel.

Suitable for the S.C.A.T. Safety System. With base insert.

For the collection of liquid chemicals in the workplace. The HDPE filling inlet contains a self-closing ball float, an overfill spout and a spray shield. Additionally, a screw cap (GL 63) with sealing ring is included.

18/10 steel.

Suitable for the S.C.A.T. safety system. With floater for level control, without UN approval.

Please note: The containers can be grounded with a suitable grounding cable (4.005 653, please order separately).

For safe storage, use, decanting and in-plant transports of flammable liquids. Explosion-proof by flame traps and pressure control valves in screw caps and metering devices (self-closing). From high quality and chemically resistant stainless steel 316/304, electro-polished, gaskets from PTFE, ergonomic handles.
Models with self-closing taps at the bottom to tap liquid stationary, optionally with unbreakable content level indicator from PFA.

For safe storage, use and in-plant transports of flammable liquids. Explosion-proof by flame traps and pressure control valves in screw caps and metering devices (self-closing). From high quality and chemically resistant stainless steel 316/304, electro-polished, gaskets from PTFE, ergonomic handles. Space-saving shape, e.g. in safety cabinets.
Models with self-closing taps designed for horizontal storage and decanting.

Suitable for S.C.A.T. safety containers with viewing stripe, order no. 6.251 593.

Electrostatic conductive container for a safe collection and transportation of flammable solvents and solvent waste. Made of electrostatic conductive HDPE to avoid ignition risks. The viewing strip allows a permanent control of the solvent level. Also available as set with safety funnel.

• weight: 450 g
• with UN-approval

For safe filling of plastic canisters. With overfill protection, liquid level control, flame trap, earthing und cap. Filter to extract solid matter. From high quality and chemically resistant stainless steel, screw cap from PE.
Upon request: available in flat design (height above thread: 70 mm), with thread G2'' or with 2''-buttress thread (S56x4).

For safe transports of flammable liquids. UN-approval (ADR, RID, IMDG, ICAO-TI) for all carriers (street, railway, air, sea). From high quality and chemically resistant stainless steel 316/304, gaskets from PTFE.

Tough and more highly resistant to acids, bases, solvents and heat. These durable racks are molded in a single, continuous piece so no assembly required and there are no detachable pieces.

• Molded in alpha-numeric grid
• No floating in water baths
• Flat labeling area

• Good chemical resistance
• Autoclavable

• Stackable
• Food-safe
• High resistance to acids

18/10 steel. Please order lid separately.
Further accessories, dispensing tap and lid locking clamps and castor are listed below.

The aluminium bottle is particularly suited for storing, transport or sending substances and reference samples which have to be stored completely unaltered.

• With UN approval (60 - 5600 ml)
• Pure aluminium (AL99.5 material)
• PP screw cap with internal aluminium seal included

Suitable for the S.C.A.T. Safety System. S90 thread. With carrying handle.

This compact funnel with lid is optimally suited for restricted space conditions in the laboratory. The hinged lid closes the funnel clean and safely. The removable sieve collects magnetic stirrers and solid substances during fluid discharge.

• Chemically resistant HDPE
• With removable sieve for easy cleaning
• Different thread sizes with free rotatable cap
• Safety lance ensures clean outflow without contaminating the container opening
• Lance length: 200 mm
• Also available without safety lance
• Chromatography vials can be disposed completely when the sieve is removed
• Black Safety funnels are made of electrostatic conductive HDPE and have a grounding connection to avoid ignition risks. Grounding cable (1.5 m) and grounding clamp are included

• Funnel diameter: 140 mm

Suitable for a variety of reaction tubes and for blood collection tubes.

• Separately usable
• Lid can be completely removed
• Sufficient depth for filling with ice

Suitable for a variety of reaction tubes and for blood collection tubes.

• Separately usable
• Lid can be completely removed
• Sufficient depth for filling with ice

High-capacity container for the safe and convenient transport of laboratory samples, instruments and valuable items. Specifically designed to meet the stringent demands of clinical and research laboratories.

• Specimen transport complies with OSHA 29 CFR 1910.1030 standards, without the need to re-label sample vessels and allowing specimen integrity to be verified through the transparent lid
• Also meets transport requirements for secondary packaging as per UN3373
• Dual latches with security tag feature to protect providing tamper-evidence
• With articulated silicone handles for comfortable and safe handling
• The lid is fully removable
• With silicone seal for airtight and watertight closure
• Different inserts for a variety of tube sizes are available separately