Half masks

The LABSOLUTE® latex-free disposable overalls with a hood, an elastic cuff and a front zipper are made of white PP fleece. They provide good protection, barrier properties and durability due to the taped seams.

Particle-tight, and to a limited extent, spray-tight chemical protective clothing.

The coverall made of 3-layer SMS material (spunbond-meltblown-spunbond) is robust and breathable. A meltblown filter membrane is embedded between two durable outer layers. Comfortable to wear, this coverall is a pleasant, protective companion in many work areas. Special features are the hood, the zipper cover strip, the back rubber element, and the arm and leg rubber elements.

• antistatic
• lint-free
• abrasion resistant
• breathable

White PP non-woven 30 g/m², with hood and zipper, elastic band on the hood and on the wrists and ankles, latex-free

DuPont™ Tyvek^® 500 Xpert, model CHF5. Hooded coverall available in white, in sizes S to XXXL. Robust yet lightweight (<180g per garment). 3-piece hood for optimal fit to head and face when turning. Elasticated face, wrists and ankles as well as glued-in waist elastic. Wide crotch area for freedom of movement. Large, easy-to-grasp zipper puller.
Tyvek^® garments are composed of flash spun, high density polyethylene, providing an ideal balance of protection, durability and comfort. Tyvek^® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It offers an excellent barrier against fine particles and fibres (down to 1 micron in size), is ultra-low-linting and antistatically treated. Silicon non-added.
Applications for Tyvek^® Classic Xpert garments include those found in pharmaceutical handling, chemical processing, the oil and gas industry, general maintenance and operations and many others.

• Chemical protective clothing, Category III, Type 5-B and 6-B
• EN 14126 (barrier to infective agents), EN 1073-2 (protection against radioactive contamination)
• Antistatic treatment (EN 1149-5) - on both sides
• Stitched external seams featuring patent-pending technology for enhanced liquid spray tightness
• Very low inward leakage thanks to optimised design
• Tyvek^® auto-lock zipper and zipper flap for increased protection

White, with hood. CE category I. Weight: 37g. Individually packed in polybag.

Material: polyethylene laminate combined with spunbond (SMS) back section

• colour white/lime green
• polyethylene laminate combined with a back section to provide a high level of moisture management and breathability, without reducing protection
• the bound seams ensure a high level of protection against liquid splashes and solid particles
• hood allows easy use with face masks
• optimised body fit provides excellent wearer comfort
• bound seams and elastics in contrasting colours for "visible safety"
• middle finger loops prevent the sleeves from riding up e.g. during work carried out above head height
• silicone-free
• suitable for cleanroom enviroment (class 8, ISO 14644-1)
• chemical protection personal protective equipment category 3, EN ISO 13982-1(Type 5), EN 13034(Type 6), EN 1149-5

Made of D263 M borosilicate glass. Accurate cutting free of flaws and blisters. Diameters as indicated. Further sizes and thicknesses are available on request.

AlphaTec^® 2000 is designed to allow water vapour (perspiration) to escape from the suit yet will withstand saturation of liquid chemicals and filter 100% of particulates down to 0.01 microns in size*
The use of a high quality two-way stretch microporous film provides an effective liquid and particle barrier combined with a high water vapour transmission rate from inside to outside.

• Excellent liquid penetration resistance and barrier to fine particulates
• Moisture vapour permeable ("breathable") to help reduce the risk of heat stress
• Silicone free
• Low linting
• Optimised body fit
• Anti-static - Tested according to EN 1149-5

• Up to 1000 °C radiation heat
• Material:Preox-aramid with aluminium high vacuum coating, approx. 260 g/m²
• Very soft quality
• Heat resistant hook-and-loop fastener
• Open back
• Length approx. 1300 mm
• DIN EN ISO 11612