Bags, Foils

The LABSOLUTE® hand protector grip HeatGuard made of red silicone rubber is temperature-resistant from -50 - 250 °C and is the best protection for your hands against hot and cold surfaces. The two pockets for thumb and fingers fit every hand size. The nobs on the HeatGuard ensure that there is a safe, slip-resistant grip at all times. You can store the hand protector grip using one of the two eyelets.

5-step irreversible temperature measuring strips covering the temperature range 29 to 290°C. Each strip measures 35 x 15mm.

Made of thick-walled silicone.
Safe, non-slip protection against very hot or cold surfaces.
Measures 10 x 19 cm with durable silicone rubber construction that remains flexible from -57 °C to +260 °C. End pockets accept thumb and fingers to grasp objects.
Mitts have multiple studs with concave tips thus providing secure grip on virtually all hot/cold surfaces.

Soft, pliant, all-cotton terry cloth gloves are superb for handling hot objects out of the autoclave or oven, or for other heat protection in the lab, school or industry. Note: Gloves are not waterproof and should not be used to handle dry ice.

Very supple, offering excellent movement. Knitted construction, without seams. Temperature resistant up to 250 °C. 1 pair per pack. Cat. II

This coarse-knitted glove made of 100% Kevlar^® is lined with cotton, making it ideal for protecting the wearer against heat and cuts.
The combination of Kevlar^® and cotton guarantees good heat insulation and enables the handling of objects up to +250 °C without losing anything in terms of cut resistance. 1 pair per pack.

Characteristics:

• Very good protection against cut injuries
• Additional cotton cladding
• Comfortable to wear

For protecting hands and arms when working in very low temperatures down to approx. -196 °C. Available in wrist-, underarm-, elbow- and shoulder-length versions.

• For work in ultra-low freezers
• For working with dry ice at -79° C
• Working in the gas phase of liquid nitrogen (without direct contact with liquid nitrogen)
• According to EN 511, EN 420, EN 388, Cat.III
• Pack of 1 pair

Suitable for all work with liquid nitrogen and other cryogenic gases up to approx. minus 196 °C. Protects against cold and contact burns in case of leakage of liquid gas. The waterproof glove is made of a special elastic and laminated fabric.
Interior insulation: polyester multi-layer fabric ( 410 g / m² ) and polyolefin porelle membrane.
According to normative EN 511, EN 420, EN 388, Cat III. Warning: Not intended for immersion in liquid nitrogen or other liquid cryogens.
1 pair per pack

For protecting hands and arms when working in very low temperatures down to approx. -196 °C. Available in wrist-, underarm-, elbow- and shoulder-length versions.

• For work in ultra-low freezers
• For working with dry ice at -79° C
• Working in the gas phase of liquid nitrogen (without direct contact with liquid nitrogen)
• According to EN 511, EN 420, EN 388, Cat.III
• Pack of 1 pair

• Thin, anatomically-shaped glove ensures dexterity
• Guaranteed without silicone
• Excellent abrasion resistance: longer lasting
• Dot embossing for better insulation and better grip
• Knitted wrist
• orange

For protecting hands and arms when working in very low temperatures down to approx. -196 °C. Available in wrist-, underarm-, elbow- and shoulder-length versions.

• For work in ultra-low freezers
• For working with dry ice at -79° C
• Working in the gas phase of liquid nitrogen (without direct contact with liquid nitrogen)
• According to EN 511, EN 420, EN 388, Cat.III
• Pack of 1 pair

CRYOLITE is a fully waterproof glove to protect the hand and forearm in operations that involve the use of liquid nitrogen (or other cryogenic gases) and heat.
Made by materials specifically designated for this application, it keeps the hands warm and dry for long periods of use. Tested, with success, by contact with liquid nitrogen (-195.82 ° C) for one minute and following test of flexibility (RCT method). Suitable for contact with Liquid Oxygen (Oxygen Index O.I. 25,4 external layer - Test Report 166/2016 Dipartimento di Ingegneria Padova.
The multilayered construction allows a high level of thermal protection, flexibility and dexterity from -200 ° C to 250 ° C.
An inner lining made of soft polyester fleece protects against contact cold.
Pack of 1 pair.

• 5-finger glove
• Made of aramide fabric with special insulation
• Usable on both sides
• Abrasion resistant
• 1 pair per pack

• Thin, anatomically-shaped glove ensures dexterity
• Excellent abrasion resistance: longer lasting
• Dot embossing for better insulation and better grip
• Cat. II

Consisting of:

• 1 pair Cryo Gloves^® Standard, size: optional, see table
• 1 x face protection shield with adjustable head mounting
• 2 x safety labels, 300 mm diameter, entitled "Face protection" and "Wear gloves"
• 1 x protection apron, Cryo Apron^®, width: 610 mm, length: 1070 mm

For protecting hands and arms when working in very low temperatures down to approx. -196 °C. Available in wrist-, underarm-, elbow- and shoulder-length versions.

• For work in ultra-low freezers
• For working with dry ice at -79° C
• Working in the gas phase of liquid nitrogen (without direct contact with liquid nitrogen)
• According to EN 511, EN 420, EN 388, Cat.III
• Pack of 1 pair

For protecting hands and arms when working in very low temperatures down to approx. -196 °C. Available in wrist-, underarm-, elbow- and shoulder-length versions.

• For work in ultra-low freezers
• For working with dry ice at -79° C
• Working in the gas phase of liquid nitrogen (without direct contact with liquid nitrogen)
• According to EN 511, EN 420, EN 388, Cat.III
• Pack of 1 pair

For protecting hands and arms when working in very low temperatures down to approx. -196 °C. Available in wrist-, underarm-, elbow- and shoulder-length versions.

• For work in ultra-low freezers
• For working with dry ice at -79° C
• Working in the gas phase of liquid nitrogen (without direct contact with liquid nitrogen)
• According to EN 511, EN 420, EN 388, Cat.III
• Pack of 1 pair

For protecting hands and arms when working in very low temperatures down to approx. -196 °C. Available in wrist-, underarm-, elbow- and shoulder-length versions.

• For work in ultra-low freezers
• For working with dry ice at -79° C
• Working in the gas phase of liquid nitrogen (without direct contact with liquid nitrogen)
• According to EN 511, EN 420, EN 388, Cat.III
• Pack of 1 pair

For protecting hands and arms when working in very low temperatures down to approx. -196 °C. Available in wrist-, underarm-, elbow- and shoulder-length versions.

• For work in ultra-low freezers
• For working with dry ice at -79° C
• Working in the gas phase of liquid nitrogen (without direct contact with liquid nitrogen)
• According to EN 511, EN 420, EN 388, Cat.III
• Pack of 1 pair

• Mitten
• Up to +900 °C contact heat short term
• Made of aramide fabric with special insulation
• Usable on both sides
• Abrasion resistant

Protect the test weights when being used daily, from grease from fingers, damp etc.

• 5-finger glove
• Protection against contact heat short term up to 1000 °C
• Made of aramide fabric with special insulation
• Usable on both sides
• Abrasion resistant

Thermal protection gloves

• Flexible, knitted cuffs
• Special Grip & Proof nitrile coating
• Cold protection down to -10 °C
• Comfortable to wear, dexterity and flexibility
• Color: blue / black

Hygienic combined with effective thermal protection.

• Knitted thermal protection
• Palm with embossed texture
• Fluid-proof
• Resistance to oils, greases and principal detergent products
• Food-safe
• 1 pair per pack

Heat-resistant gloves for protection of the operator when loading or removing hot materials at furnaces.

5-finger glove made of KEVLAR® coarse knit with cotton insulation

• Soft
• Insulates
• Cut-resistant
• Washable

5-finger glove made of KEVLAR® coarse knit with cotton insulation

• Soft
• Insulates
• Cut-resistant
• Washable

Waterproof Cryo-Grip^® Gloves offer improved grip on small objects while protecting your hands and arms when working in hazardous, ultra-cold environments. Gloves are designed to provide a high level of thermal protection where the exposure to cryogenic fluids might exist. Made from state-of-the-art materials and a multi-layered construction, the gloves are designed to keep you dry and to wick moisture away from your hands, so you can work in comfort for extended periods of time and allows a maximum level of grip, dexterity, flexibility, and thermal protection - essential features when function is important and safety is critical.
1 pair per pack.

CAUTION: Not intended for immersion in liquid nitrogen or other liquid cryogens.

• Mitten
• cut resistant, soft, flexible
• Up to +650 °C contact heat short term
• Made of aramide fabric with special insulation
• Usable on both sides

• Mitten
• cut resistant, soft, flexible
• Up to +500 °C contact heat short term
• Made of E-glass fabric
• Usable on both sides

• Mitten
• Protection against short-term contact heat up to 750 °C
• Double isolated
• Usable on both sides
• Abraison resisitant
• Material: E-glass fabric with silicone coating
• One size fits all

• up to 1000 °C radiation heat
• made of preox-aramid-aluminium high vacuum coating approx. 260 g/m²
• very soft quality
• heat resistant hook-and-loop fastener and stand collar
• insulated press button on both sides
• length approx. 1200 mm
• DIN EN ISO 11612

The hand protection made of highly cold- and heat-resistant silicone rubber protects against burns and freezing. Deep frozen, hot or boiling substances and apparatus can thus be handled safely.

• Temperature range from -50 to 200 °C (briefly up to 250 °C)
• Extremely elastic and slip-proof

The hand protection made of highly cold- and heat-resistant silicone rubber protects against burns and freezing. Deep frozen, hot or boiling substances and apparatus can thus be handled safely.

• Temperature range from -50 to 200 °C (briefly up to 250 °C)
• Extremely elastic and slip-proof

Kevlar is a material with universal properties, one of them being a very high resistance to thermal loads. Kevlar can protect against temperatures up to around 300 °C (physical contact) and 450-500 °C (radiant heat). Additionally, this Kevlar glove is very durable and does an excellent job of protecting against cut and puncture injuries. Double knit (two-layer) construction. Length approx. 40 cm, with knitted cuffs for better fit, universal size.