Fume hoods

For fume cupboards.
Indicates if the fume cupboard is switched on.

Manipulation of liquid chemicals and powders where and when needed.
Advantages: eliminates installation costs, saves substantially capital and running costs, mobile and easy to relocate wherever needed; protects the user and environment against toxic fumes. Low Energy consumption: less than 200 KWh /year (for 2100 hours usage)

Choice of activated charcoal filters (Please order separately!):

• "ORG" filter for flammables and organics
• "CORG" filter suitable for the most common laboratory chemicals, for organic and corrosive vapors
• "FOR" filter for formaldehyde vapors
• "AMM" filter for ammonia vapors
• HEPA filter "HEP": for Particle
• Frame for HEPA filter "SH"

Standard equipment:

• Built in 15/10 steel, covered with white Epoxy (RAL 9010) with blue stripes
• HPL or tempered glass worktop on removable retention tank (optional)
• Transparent PMMA glazed walls on all four sides for comfortable working or lectures
• Ergonomic hand traps or trapeze opening
• 4 protective caps for easy use of external supplies (e.g. power cables, water, gas)
• Air velometer; sampling outlet for reactive tube measurement

Recirculating air filter system (CLASS 2) and coal filters Norm NFX 15-211

• Noiseless fan: 57 dB(A), 220-240 V, 50 Hz, 10 W, 0.1 A
• Air flow: 170 m³/h; face velocity: 0.4 to 0.6 m/s
• Ventilation system with lighting control in case of system failure

Please choose fume hoods, charcoal filters, trolleys and accessories according to your needs. Delivered mounted.
The fume hood will be delivered without bottom retention tank and work top.
Charcoal filter "ORG": for organic vapors
Charcoal filter "CORG": for organic and corrosive vapors (suitable for the most common laboratory chemicals)
HEPA filter "HEP": for Particle
Frame for HEPA filter "SH"

For models with 2 fans, please order 2 charcoal filters or rather HEPA filters with additional frame.
For models with 3 fans, please order 3 charcoal filters or rather HEPA filters with additional frame.

• Safe handling of chemicals, protection from hazardous vapours and potentially explosive atmospheres
• Suitable for Pharmacies
• Easily mounted on a table top
• Robust construction made of chemically resistant, antibacterial powder-coated sheet steel
• Testing of the air equipment by recognized test institute

Standard equipment:

• Exhaust air fan
• Monitoring electronics with visual and audible alarm
• Stepless height adjustable front sash made from acrylic glass
• Workplace light
• 2 sockets

Manipulation of liquid chemicals and powders where and when needed.
Advantages: eliminates installation costs, saves substantially capital and running costs, mobile and easy to relocate wherever needed; protects the user and environment against toxic fumes. Low Energy consumption: less than 200 KWh /year (for 2100 hours usage)

Choice of activated charcoal filters (Please order separately!):

• "ORG" filter for flammables and organics
• "CORG" filter suitable for the most common laboratory chemicals, for organic and corrosive vapors
• "FOR" filter for formaldehyde vapors
• "AMM" filter for ammonia vapors
• HEPA filter "HEP": for Particle
• Frame for HEPA filter "SH"

Standard equipment:

• Built in 15/10 steel, covered with white Epoxy (RAL 9010) with blue stripes
• HPL or tempered glass worktop on removable retention tank (optional)
• Transparent PMMA glazed walls on all four sides for comfortable working or lectures
• Ergonomic hand traps or trapeze opening
• 4 protective caps for easy use of external supplies (e.g. power cables, water, gas)
• Air velometer; sampling outlet for reactive tube measurement

Recirculating air filter system (CLASS 2) and coal filters Norm NFX 15-211

• Noiseless fan: 57 dB(A), 220-240 V, 50 Hz, 10 W, 0.1 A
• Air flow: 170 m³/h; face velocity: 0.4 to 0.6 m/s
• Ventilation system with lighting control in case of system failure

Please choose fume hoods, charcoal filters, trolleys and accessories according to your needs. Delivered mounted.
The fume hood will be delivered without bottom retention tank and work top.

Compact, energy saving fume hood without ducting system.

• Independently tested and complies with AFNOR NFX 15-211 standard
• Easy Filter Change
• Average Inflow Air Velocity: 0,4m/s
• Sentinel-Microprocessor with LCD-Display, air velocity alarm and 24-hour-clock
• Fluorescent lighting provides superior illumination of the work zone
• Tempered glass sliding sash
• Tempered glass side panel
• ISOCIDE™ antimicrobial coating on all painted surfaces minimizes contamination.
• Stainless steel worktop

Model variations:
Model type B: Pre-filter, main filter (activated carbon, different filter types available)
Model type C: Pre-filter, main filter (activated carbon, different filter types available), back-up filter (activated carbon, different filter types available)
Model type E: Pre-filter, main filter (activated carbon, different filter types available), back-up filter (HEPA filter)

Options on request:
Filter, electrical outlet, VOC sensor, service fixture, swan-neck faucet, Drip Cup (PP), support stand, installation

For operation the main filters and the back-up filter (Modell type C) have to be ordered separately.

Compact, energy saving fume hood without ducting system.

• Independently tested and complies with AFNOR NFX 15-211 standard
• Average Inflow Air Velocity: 0.5m/s
• Easy Filter change
• Sentinel-Microprocessor with LCD-Display, air velocity alarm and 24-hour-clock
• Fluorescent lighting provides superior illumination of the work zone
• Sloped acrylic front window
• With transparent back wall (for type SPD-4B1)
• Acrylic side walls
• ISOCIDE™ antimicrobial coating on all painted surfaces minimises contamination.
• Stainless steel spill-retaining work top.
• Sampling port
• Pass-through ports in the back wall
• Pre-filter made of polyester fibre, EU3 rating is included

Hood is delivered unassembled. On-site assembly can be completed in 60 mins. Without special tools.

Options on request:
Support stands, installation

For operation the main filters have to be ordered separately.

Aluminium frame with panels made of acrylic glass (PMMA), base panel made of polyethylene. Front panel with two glove ports and one pair of natural rubber gloves size 9, two lead-ins for cables on the back side (upper left and upper right). Work space including two hose connectors for gas-filling and aeration and approprate tubing. Glove box without transfer chamber with 1 x 5m PVC tubing for gas-filling and 1 x 5m PE aeration tubing. Glove box with transfer chamber with 2 x 5m PVC tubing for gas-filling and 2 x 5m PE aeration tubing.

Glove box with Transfer chamber
Transfer chamber with two doors, external door with latch to prevent accidental opening, the tray extends into the workspace with opening of the internal door for easy removal of inserted products.

Specifications
Glove boxes with and without Transfer chamber
Capacity Box:	290 l
Internal Dimensions Box (W x D x H):	850 x 540 x 650 mm
Max. Load Box:	40 kg
Inlet opening:	diam. 190 mm
Hinged lid opening (W x H):	850 x 425 mm
Working Temperature range:	-20 ... 70 °C
Glove boxes with Transfer chamber
Capacity Transfer chamber:	24 l
Internal Dimensions Transfer chamber (W x D x H):	220 x 320 x 275 mm
Max. Load Transfer chamber:	3 kg

• specified workplace limit values are maintained
• Ventilation test according to DIN EN 14175-3 (5.4.4)
• maximum user safety
• made of chemically resistant, anodised aluminium profiles
• glazed at the side made from 5mm ESG (tempered safety glass)
• highly effective pollutant capture through special, internally mounted fresh air curtain equipment
• connecting pieces (DN160) in the ceiling region for connecting to the customer's exhaust air plant

Standard equipment:

• integrated, workplace lighting mounted to avoid glare
• transparent side panels
• fold-away deflector
• melamine resin coated rear panel
• stainless steel (V2A/1.4301) work plate (vat sealed by welding)
• on and off function, exhaust air control and light switch at the lower right front side

Specifications
Dimensions (W x D x H):	1200 x 750 x 1400mm

The new generation of ESCO Airstream horizontal and vertical laminar flow benches offer optimal product protection by achieving ISO Class 5 conditions inside the cabinet.
Features:

• Energy-efficient DC ECM motors
• Stable and self-compensating airflow
• Sentinel Gold microprocessor control
• Control panel to easily monitor the operating parameters
• Standby mode reduces power consumption while maintaining the ISO class 5 conditions inside the work bench
• Visual and audible alarms
• Side windows made of safety glass
• Standard working space height vertical/horizontal benches: 689 mm/573 mm
• Additional working space heights on request.
• ULPA filter with long service life and protection mesh
• Pre-filter EU3
• ISOCIDE antimicrobial coating on all painted surfaces minimizes contamination
• Apparatus for UV lamp with timer (UV lamp and protective cover must be ordered separately)

Options on request:
Stands, electrical sockets (4.662 021), front covers with UV lamp, IQ/OQ

Please order stands separately.