-
- General laboratory consumables
- Occupational safety, Security
- Analytical measurement and testing
- Stirring, Shaking, Mixing
- Sample preparation
- Distillation, separation, filtration
- Heating and cooling technology
- Liquid Handling
- Vacuum technology, Drying, Dry storage
- Optical instruments and microscopes
- Cleaning and sterilisation
- Environmental-, soil-, water-, food analysis
- Chromatography
- Cleanroom
Drum pumps
Drum pump Pump-it®
![A click opens this product segment](/lab/shop/pic/150x150/owweb/9001110_3.jpg)
For rapid and clean emptying from cans, drums and small barrels up to 60L.
- Precise dosing, without dripping
- Pump connection suitable for 64mm dia. (BSI) container threads
- stepless length adjustment of immersion tube
- Threaded adapters for most commercially-sold containers available
- Not suitable for HCl
Hand pumps OTAL®, PP
![A click opens this product segment](/lab/shop/pic/150x150/owweb/9001210_1.jpg)
Only the tube comes into contact with the liquid when the pumps are used, so that a great deal of liquid can be filled off. The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid.
- Good pump capacity
- Foodsafe
Drum Pump PumpMaster
![A click opens this product segment](/lab/shop/pic/150x150/owweb/s2104_1.jpg)
The manual pressure pump is ideally suited for drawing off, decanting and emptying canisters and barrels. The hand pump is used to create excess pressure that forces the liquid out of the container. The stopcock also allows extraction of small quantities of liquid. The PumpMaster container pump is mounted on the container using a flexible stopper with a variable and adjustable diameter. No special thread adapters are required. PumpMaster fits all commercial container openings with a diameter from 46.5 mm to 60 mm. The immersion tube has a length of 95 cm and it can be shortened depending on the size of the container....
Anti-static set
![A click opens this product segment](/lab/shop/pic/150x150/owweb/9001346_3.jpg)
When dispensing combustible/explosive liquids pump, both dispensing and filling drum involved in the process must be sufficiently earthed, in order to prevent ignition or explosion through electrostatic discharges. Antistatic set, includes three colour-coded connecting cables with clamps, supplied complete in plastic case....
Barrel pump, PTFE
![A click opens this product segment](/lab/shop/pic/150x150/owweb/s7473_1.jpg)
- For ultrapure and aggressive liquids
- Made of solid, pure white PTFE, giving an excellent chemical resistance to all media (with the exception of elemental fluorine)
- With stopcock to prevent the escape of harmful or hazardous liquids and unwanted drips
- Barrel screw joints are availabe as accessories
Barrel pumps AccuOne and EnergyOne
![A click opens this product segment](/lab/shop/pic/150x150/owweb/9001420_1.jpg)
The pumps are equipped with two different power supply systems: AccuOne, driven by a high-performance rechargeable battery or EnergyOne, with a power cable for direct connection to mains electricity. Innovative new feature: The power supply units are interchangeable! The rechargeable battery or the power supply unit are fitted with a clip lock and are removable. They can be exchanged quickly and easily. Thus AccuOne can also be operated with the power supply cable unit and EnergyOne can be operated with the rechargeable battery. The drive can also be disconnected quickly and easily from the pump station with a clip lock. This makes it possible to use one drive for filling at several stationary pump stations. AccuOne and EnergyOne are designed for applications in which even very small amounts of liquid can be added to small containers with narrow openings. The TouchPanel is sealed against dust, dirt and water. By a foil Keyboard it can be used to regulate the flow rate continuously and precisely from 0.4l/min to 12 l/min. The light and powerful pumps are made of high-quality materials, PP, PTFE and Hastelloy C, to ensure outstanding chemical resistance. Please make note of detailed information related to chemical resistance!...
Barrel pumps, PP
![A click opens this product segment](/lab/shop/pic/150x150/owweb/s6344_2.jpg)
- For decanting acids, caustic solutions and aggressive detergents
- Excellent recovery of residual liquid in the barrel provided by base-sitting, non-return valve and steplessly adjustable immersion tube
- For barrels and tanks from 30 to 1000l.
Type A: With rigid, angled, dispensing nozzle....
Drum pumps, mains-powered
![A click opens this product segment](/lab/shop/pic/150x150/owweb/s4113_2.jpg)
Lightweight and powerful pump for transferring small amounts of aqueous liquids up to 300 mPas from cans and drums with infinitely variable speed controller.
- Motor 230 V, 200 W (IP 24)
- Seal less pump tube
- Suitable accessory flow meter required
- Pump with tubing connection
Drum pumps, mains-powered
![A click opens this product segment](/lab/shop/pic/150x150/owweb/s4151_2.jpg)
For safe handling of environmentally hazardous and aggressive liquids as well as inflammable and explosive fluids.
Drum pumps supplied with: 230V motor, 5m cable and plug, pump tube and tubing connection. Explosion-proof version additionally supplied with earthing strap.
Pump set "alkalis"...
Gas-tight Barrel pump
![A click opens this product segment](/lab/shop/pic/150x150/owweb/s7533_2.jpg)
With flexible discharge tubing for drawing off into larger canisters and containers. Convenient liquid transfer as the canister can be left standing on the floor. The connection cone is pressed against the canister manually.
The pump is fitted with a gas-displacement device for odour-free, liquid transfer. The pump can be hermetically sealed with 2 ball valves for odour-free liquid transfer using the gas-displacement method....
Horizontal centrifugal pumps, magnetically coupled
![A click opens this product segment](/lab/shop/pic/150x150/owweb/9880361_1.jpg)
These new magnetic drive pumps are designed for pumping acids, bases, mixtures of acids and bases, solvents, photochemicals into alkali stripping baths, galvanic baths, as well as radioactive, sterile, expensive or highly corrosive liquids. The pumps are sealless. The impeller is driven by the magnetic force of the outer magnets, therefore no mechanical seal is required. As the pump housing is hermetically sealed no leaks can occur. The use of high performance,...
Mini solvent pump
![A click opens this product segment](/lab/shop/pic/150x150/owweb/9001351_4.jpg)
The self-closing discharge (with auto-stop function) of the Mini solvent pump ensures absolutely precise filling with no dripping at all. Dosing is even easy in very small containers such as test tubes, which present no problems. A hose can optionally be fastened onto the discharge spout (internal Ø 6 mm), thus making it possible to fill the container from a greater distance....
Solvent pump foot operated
![A click opens this product segment](/lab/shop/pic/150x150/owweb/9001134_6.jpg)
For filling off high purity liquids such as solvents. Due to the barrel screw joint and the stopcock, the container and the pump can be hermetically sealed. Electrostatic charge can be dissipated through the accessory antistatic set (please order seperately).
- Medium-contacting parts made opf stainless steel (1.4301) and PTFE
- For barrels up to 220 litres, immersion tube can be steplessly adjusted to the barrel depth
- Suitable for steel barrels with R 2"" thread
Solvent pump hand operated
![A click opens this product segment](/lab/shop/pic/150x150/owweb/9001349_5.jpg)
For contamination-free removal of organic solvents and flavouring agents. Can be completely closed off with two ball valves so that no dangerous vapours can escape after dispensing. Electrostatic charge can be dissipated through the accessory antistatic set (please order separately).
- Medium-contacting parts are made of stainless steel (1.4301) and PTFE
- For containers up to 60 litres
- Suitable for containers with R 2"" thread
- The solvent pump for tinfoil canisters has a connector thread for pull-out spouts