-
- General laboratory consumables
- Occupational safety, Security
- Analytical measurement and testing
- Stirring, Shaking, Mixing
- Sample preparation
- Distillation, separation, filtration
- Heating and cooling technology
- Liquid Handling
- Vacuum technology, Drying, Dry storage
- Optical instruments and microscopes
- Cleaning and sterilisation
- Environmental-, soil-, water-, food analysis
- Chromatography
- Cleanroom
Autoklaves, Accessories
Universal drying oven LLG-uniOVEN 42 and LLG-uniOVEN 110
Microprocessor controlled universal drying oven with forced convection including two shelves. Each shelf of the uni OVEN 42 and uni OVEN 110 has a load capacity of 20 kg, the total load capacity of each unit is 50 kg. The maximum number of shelves is 7 for uni OVEN 42 and 10 for uni...
DryingOven 125 basic dry / control dry
Powerful drying cabinets with rapid heating and exact temperature regulation guarantees reproducible results. Thanks to its high quality insulation, the device has a very large interior of 125L in relation to its total volume. This structure also reduces odour emissions, operating costs, and ensures excellent temperature uniformity....
Universal Ovens UNplus and UFplus
The all-round genius among heating ovens covers a multitude of applications, ideally at temperatures above +50 °C. The fresh air is preheated in the pre-heating chamber to avoid temperature fluctuations.
TwinDISPLAY: ControlCOCKPIT with two colour displays
You can find a detailed description of the "TwinDISPLAY" model at www.memmert.com...
Constant climate chambers series KBF-S Solid.Line
Constant climate chambers for long-term tests and accelerated stability tests of pharmaceutical products according to the ICH guideline Q1A. With corrosion and condensate-free stainless steel interior for homogeneous temperature and humidity conditions.
- Electronically controlled APT.line™ preheating chamber with cooling system
- Inner chamber made completely of stainless steel
- 2 stainless steel racks incl. shelf support
- Intuitive touchscreen controller with time segment and real-time programming with internal measured value recording
- Humidity control with capacitive humidity sensor and vapor humidification
- Independent temperature safety device class 3.1 (DIN 12880) with optical and audible alarm
- Access port with silicone plug diam. 30mm, left side
- LCD display for indication of temperature, humidity, alarms and additional information
- Internal data logger with USB interface
- Independent water supply via canisters
- Models from 240 l capacity with double swivel castors and brake
Constant climate chambers, KBF / KMF series
For long-term stable temperature/humidity simulations in one chamber. The constant climate chambers are ideal for norm-compliant work according to ICH guidelines and work independently of the water supply.
KBF Series: Constant climate chambers with large temperature range: 0 °C to 70 °C and humidity range: 10 % RH to 80 % RH....
Drying and heating chambers FED Avantgarde.Line
Drying and heating chambers are suitable for routine drying and sterilisation tasks with homogeneous temperature distribution.
- High temperature accuracy thanks to APT.line™ technology
- Electromechanical control of the exhaust air flap
- Chambers up to 115 l are stackable
- Ergonomic handle design
- USB connection for data recording
- Class 2 integrated independent adjustable temperature safety device (DIN 12880) with visual alarm
Drying and heating chambers FED Classic.Line
Drying and heating chambers are suitable for routine drying and sterilisation tasks with homogeneous temperature distribution.
- Uniform drying conditions thanks to APT.line™ preheating chamber technology
- Identical test conditions throughout the chamber interior independent of sample size and quantity
- Adjustable exhaust air flap
- Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm
Heratherm™ Advanced Protocol Ovens
The series provide bench-top models with 60, 100 or 180 l as well as floor models with 400 or 750 l chamber volume and 3 different fittings, each optionally with gravity or mechanical convection.
- Very high energy efficiency, environmentally friendly materials (reduced use of formaldehyde), reduced heat emission
- Programmable timer
- Small footprint
- Flexible shelf system doubles the number of shelves and therefore the footprint
- Very good spatial and temporal temperature stability
- Automatic visual and acoustic over-temperature alarm
- Very low temperatures at outer wall
- Easy to read vacuum fluorescent display
- Intuitive user interface for setting temperature
- Easy cleaning due to edgeless fabrication
Heratherm™ Advanced Protocol Security Ovens
The series provide bench-top models with 60, 100 or 180 l as well as floor models with 400 or 750 l chamber volume and 3 different fittings, each optionally with gravity or mechanical convection.
- Very high energy efficiency, environmentally friendly materials (reduced use of formaldehyde), reduced heat emission
- Programmable timer
- Small footprint
- Flexible shelf system doubles the number of shelves and therefore the footprint
- Very good spatial and temporal temperature stability
- Automatic visual and acoustic over-temperature alarm
- Very low temperatures at outer wall
- Easy to read vacuum fluorescent display
- Intuitive user interface for setting temperature
- Easy cleaning due to edgeless fabrication
Heratherm™ General Protocol Ovens
The series provide bench-top models with 60, 100 or 180 l as well as floor models with 400 or 750 l chamber volume and 3 different fittings, each optionally with gravity or mechanical convection.
- Very high energy efficiency, environmentally friendly materials (reduced use of formaldehyde), reduced heat emission
- Programmable timer
- Small footprint
- Flexible shelf system doubles the number of shelves and therefore the footprint
- Very good spatial and temporal temperature stability
- Automatic visual and acoustic over-temperature alarm
- Very low temperatures at outer wall
- Easy to read vacuum fluorescent display
- Intuitive user interface for setting temperature
- Easy cleaning due to edgeless fabrication
High-temperature Tube Furnaces RHTH/RHTV series
The high-temperature tube furnaces are available in either horizontal (type RHTH) or vertical (type RHTV) designs. High-quality insulation materials made of vacuum-formed fibre plates enable energy-saving operation and a fast heating time due to low heat storage and heat conductivity. By using different gas supply systems, operations can be performed under a protective gas atmosphere, vacuum, or even with flammable gasses....
Safety drying ovens FDL
A safety drying oven from BINDER ensures the perfect test result of your solvent-based paints and coatings, absolute temperature precision even with high ventilation.
- Defined solvent quantity according to EN 1539
- Electronically controlled APT.line™ preheating chamber technology
- Temperature range: from 10 °C above ambient temperature to 300 °C
- Independent adjustable temperature safety device class 2 (DIN 12880), with visual temperature alarm
- RS 422 interface for use with APT-COM™ DataControlSystem communication software
- Power supply 230 V, 50/60 Hz
Universal Ovens UN and UF
The all-round genius among heating ovens covers a multitude of applications, ideally at temperatures above +50 °C. The fresh air is preheated in the pre-heating chamber to avoid temperature fluctuations.
SingleDISPLAY: ControlCOCKPIT with one colour display
You can find a detailed description of the "SingleDISPLAY" model at www.memmert.com...
Drying and heating chambers ED-S Solid.Line
Drying and heating chambers are suitable for drying and heat storage in research and quality assurance.
- Easy handling
- Accurate temperature control
- Simple and ergonomic door opening
- APT.line™ preheating chamber technology
- Adjustable exhaust air flap
- Controller with timer function
- Class 2 integrated independent adjustable temperature safety device (DIN 12880) with visual alarm
Drying and heating chambers FD-S Solid.Line
Drying and heating chambers are suitable for drying and heat storage in research and quality assurance.
- Easy handling
- Accurate temperature control
- Simple and ergonomic door opening
- APT.line™ preheating chamber technology
- Adjustable exhaust air flap
- Controller with timer function
- Class 2 integrated independent adjustable temperature safety device (DIN 12880) with visual alarm
Accessories for CO2 Incubators ICOmed
- Battery-buffered ControlCOCKPIT - Uninterrupted supply for the entire display unit (ControlCOCKPIT) and therefore complete documentation of all parameters even when there is a power failure. The CO2 parameter is continuously regulated
- Two gas connections with quick release connectors for automatic switch-over of gas cylinders
Ovens TR 60 - TR 1050 up to 300°C
With their maximum working temperature of 300°C and forced air circulation, the TR series ovens achieve very good temperature uniformity. They can be used for various applications such as e.g. drying, sterilising or warm storing. The stainless steel interior chamber is easy to clean and resistant to rust....
Steriliser SFplus
Safer than disinfection, hot-air sterilisation of containers and instruments.
The safety feature for this hot air steriliser: Setpoint Wait. This means that the programme for sterilisation only starts when the set temperature has been reached. This feature can also be used with freely positionable Pt100 temperature sensors. Here the sterilisation time only begins when the set temperature has been reached at all measurement points, and reliable sterilisation is guaranteed at all times....