Wide mouth kegs

LabHEAT^®-Heating mantles for flasks, round bottom. Flexible glass yarn heating element, outer jacket in glass silk, with diam. 60mm bottom out-let from 500ml, max. heating element temperature 450 °C, 1.5 m power supply (earthed) cable with heating-zone switch and RCD (residual current detection), nominal voltage 230 V AC.

LabHEAT^®-regulator for heating mantles. Electromechanical; infinitely variable control over power outlet; plastic housing (H x W x D) 55 x 65 x 120 mm; switching power max. 2990 W (13 A); 1.5 m power supply (earthed) cable with plug.

Robustes und chemikalienbeständiges Gehäuse aus Polypropylen. Hocheffiziente Aufheizung des Heizelements bis zu einer Temperatur von 450 °C. Das flexible Heizelement befindet sich in einem wärmeisolierten Einsatz und bietet maximale Wärmeübertragung bei minimaler Bruchgefahr für den Kolben. Selbst bei voller Leistung bleibt das Außengehäuse aufgrund guter Isolierung kühl und kann gefahrlos angefasst werden ("cool-to-touch"). Alle Heizmäntel sind mit Stativmuffen für Stäbe bis zu 12 mm Durchmesser ausgestattet und verfügen zum Schutz des Anwenders vor Stromschlägen über eine doppelte Sicherung mit Erdung. Netzanschluss 220-240 V 50/60 Hz. Ersatz-Heizelemente sind auf Nachfrage erhältlich.

LabHEAT^® - Accessories made of stainless steel (1.4301) for higher stability or to integrate within support wall. The heating mantles are able to be suspended on its four clips.

Solid stainless steel liner, which protects against fluid spills and is easy to clean, with central aperture to accommodate round-bottom and pear-shaped flask and 60° funnels. Polypropylene outer case is resilient and chemically- resistant. Highly efficient in heating up to an element temperature of 450 °C. Even at full power output, the exterior remains "cool-to-touch" due to good heating element insulation. All heating mantles have support clamp for rods of up to 12 mm diameter, and are double fused, with earth (ground) screen to protect the user from electric shocks. Available as 220-240 V 50/60 Hz models; spare heater cartridges are available on request.

For round bottom flasks, pear-shaped flasks and 60° funnels (Mantle is open at the bottom).

Solid, with mesh stainless steel liner, which protects against fluid spills, with central aperture to accommodate round-bottom and pear-shaped flask and 60° funnels. Polypropylene outer case is resilient and chemically- resistant. Highly efficient in heating up to a maximum element temperature of 450°C. Even at full power output, the exterior remains "cool-to-touch" due to good heating element insulation. All heating mantles have support clamp for rods of up to 12mm diameter, and are double fused, with earth (ground) screen to protect the user from electric shocks. Available as 220-240 V 50/60 Hz models; spare heater cartridges are available on request.

For round bottom flasks, pear-shaped flasks and 60° funnels (Mantle is open at the bottom).

Built-in adjustable heater control up to an element temperature of 450°C and magnetic stirring control up to approx. 520rpm with auto-reverse facility and automatic stirrer bar trap; the stirrer unit has an independent power supply. Polypropylene outer case is resilient and chemically-resistant. Even at full power output, the exterior remains ""cool-to-touch"" due to good heating element insulation. All heating mantles have support clamp for rods of up to 12mm diameter, and are double fused, with earth (ground) screen to protect the user from electric shocks. Available as 220-240 V 50/60 Hz models; spare heater cartridges are available on request.

LabHEAT^®-Heizleitungen. Sehr flexibel; nicht feuchtigkeitsgeschützt, mit Glasseidenumflechtung, ohne Schutzleitergeflecht 450 °C. 2 x 1,5 m Netzanschlussleitung für Festanschluss, ca. 150 W/m, Nennspannung 230 V AC. Abmessungen: Ø 3,5 bis 4,5 mm.

LabHEAT^®-Heating tapes. Very flexible. No protection against ingress of water. With inner metal protective braiding and glass fibre insulation. Max. heating element temperature: 450 °C. With power cable (1.0 m) for fixed connection, nominal voltage: 230 V AC.
Dimensions: 30 x 5 mm.

Heating mantle has a "V"-shaped design for large, pear-shaped and round-bottom flasks. The bottom opening allows 60° funnels of various diameters to be accommodated. Coiled heating element provides optimal heat transfer. Control heat throughout the mantle using three separate electrical circuits (top, middle, and bottom), each controlled with its own dial switch.

• Cool-to-the-touch design with powder-coated aluminium casing
• Indicator lamps for "power on" and "heat on" operation

Not moisture-resistant. With fibre glass protective braiding. Max. surface temperature 450°C. With nickel-plated copper external braiding as protective earth conductor, 1.0 metre long mains connection cable for permanent connection to a fused 230 V outlet. Power loading approximately 200 W/m, 230 V a.c. Tape dimensions: 12 x 8 mm. Lengths as indicated.

LabHEAT^®-regulator. Freely configurable electronical temperature regulator with two displays indicating the desired and actual values. PID self-optimisation, with ramp function, USB port, for external configuration. Pt-100 or thermocouples for temperatures up to 1200 °C, metal housing (H x W x D) 75 x 205 x 140 mm with fixed support clamp, switching power max. 2300 W (10A), 1.5m power supply (earthed) cable with plug. Nominal voltage 230 V AC.

LabHEAT^® - Heating mantles for flasks, round bottom. Flexible glass yarn heating element in plastic coated, chemical-resistant metal housing with built-in power-on and heating zone switch; max. heating element temperature 450°C; 1.5m power supply (earthed) cable and RCD (residual current detection); nominal voltage 230V AC.

LabHEAT^® - Heating mantles for flasks, round bottom. Flexible glass yarn heating element in plastic coated, chemical-resistant metal housing with built-in power-on and heating zone switch, in addition equipped with a controller which allows a continuous adjustment of the heater power; max. heating element temperature 450°C; 1.5m power supply (earthed) cable and RCD (residual current detection); nominal voltage 230V AC.

LabHEAT^®-Heating mantles for flasks, round bottom. Designed and technically identical to series KM-ME, but can be used for round flasks of three different sizes, max. heating element temperature 450°C; 1.5m power supply (earthed) cable and RCD (residual current detection); nominal voltage 230V AC also equipped with a controller which allows a continuous adjustment of power.

Alternating current resistance controller with interference suppressor for variable, no-power-loss control of hotplates, heating tapes, soldering irons, light bulbs, infrared radiators etc., control range 25V to 225V. With single throw on/off potentiometer and shielded fuse holder for safe fuse replacement away from the internal circuit. Fitted with interference suppressor in accordance with EN standard.

LabHEAT^®-Heating mantles for flasks, round bottom. Designed identical to series KM-G, but the heating element is made of heat-resistant quartz yarn and permits a maximum temperature up to 900 °C; 1.5 m power supply (earthed) cable with heating-zone switch and RCD (residual current detection); nominal voltage 230 V AC.

LabHEAT^® - Heating mantles for flasks, round bottom. Designed and technical identical to series KM-ME, but in addition equipped with a magnetic stirrer; rotational frequency up to 1600rpm max. heating element temperature 450°C, 1.5m power supply (earthed) cable and RCD (residual current detection); nominal voltage 230V AC.

LabHEAT^®-Zubehör für Gehäuseheizhauben und Reihenheizgeräte. Zur Befestigung einer Stativklemme bis Ø 12 mm am Gehäuse oder zum Integrieren der Gehäuseheizhaube in Stativaufbauten.

LabHEAT^®-sensors. Suitable for temperature control and KM-KM-RX1001 RX1004 with permanently attached cable, with or without diode plug.

KM-TP2: Pt100, up to 400 °C, sheated element V2A, dia. 4 x 50 mm,
KM-TPG: Pt100, up to 250 °C, glass tube, dia. 6 x 40 0mm,
KM-TNS: NiCr-Ni, up to 1200 °C, rod sensor in Inconell, dia. 1.5 x 300 mm
KM-TNF: NiCr-Ni, up to 400 °C, flat sensor, 0.4 x 15 x 400 mm

Silicone insulated heating tape up to 200 °C.

• Waterproof
• Very flexible
• Easy to clean
• Suitable for food production
• Without protective conductor

Isolierhauben für Ein- und Zweihals-Rundkolben, beheizte Isolierhauben mit Glasseide Heizkörper (max. 450 °C) und Schutzerdung.

• Von Hand gehäkelt
• Außenmantel aluminiumbeschichtet
• Wärmeisoliert
• Zum Ausgleich von Wärmeverlusten an der oberen Kolbenhälfte

LabHEAT^® - Heating mantles for high form beakers. Flexible glass yarn heating element in plastic coated, chemical-resistant metal housing, with built-in power-on and heating zone switch, max. heating element temperature 450 °C; 1.5 m power supply (earthed) cable and RCD (residual current detection); nominal voltage 230 V AC.

LabHEAT^® - Heating mantles for low form beakers. Flexible glass yarn heating element in plastic coated, chemical-resistant metal housing, with built-in power-on and heating zone switch, max. heating element temperature 450 °C; 1.5 m power supply (earthed) cable and RCD (residual current detection); nominal voltage 230 V AC.

Silicone insulated heating tape up to 200 °C.

• Waterproof
• Very flexible
• With metal overbraiding (copper) for good heat transfer
• Metal overbraiding is mechanically and electrically protective (grounded)