Orbital shakers

...

Constant climate chambers for long-term tests and accelerated stability tests of pharmaceutical products according to the ICH guideline Q1A. With corrosion and condensate-free stainless steel interior for homogeneous temperature and humidity conditions.

• Electronically controlled APT.line™ preheating chamber with cooling system
• Inner chamber made completely of stainless steel
• 2 stainless steel racks incl. shelf support
• Intuitive touchscreen controller with time segment and real-time programming with internal measured value recording
• Humidity control with capacitive humidity sensor and vapor humidification
• Independent temperature safety device class 3.1 (DIN 12880) with optical and audible alarm
• Access port with silicone plug diam. 30mm, left side
• LCD display for indication of temperature, humidity, alarms and additional information
• Internal data logger with USB interface
• Independent water supply via canisters
• Models from 240 l capacity with double swivel castors and brake

The cooled incubators with the unique ControlCOCKPIT for a quick and intuitive operation. Ideal at temperatures around zero and below. For rapid and precise alternation between heating up and cooling down times in ramp operation. Extraordinarily quiet.

Standard equipment :

• PID microprocessor control with integrated auto-diagnostic system
• Interior stainless steel, material 1.4301 (ASTM 304) very stable and easy to clean
• Structured stainless steel housing, scratch-resistant, robust and durable; rear of zinc-plated steel (all sizes mounted on lockable castors)
• High-temperature connectors on the rear of the appliance for single-phase power connection according to country specific systems and IEC standards
• Internal data logger with a storage capacity of at least 10 years
• German, English, French, Spanish, Polish, Czech, Hungarian language settings available on the ControlCOCKPIT
• Digital backwards counter with target time setting adjustable between 1 minute and 99 days
• The SetpointWAIT function guarantees that the process time does not start until the set temperature is reached at all measuring points - optional for temperature values recorded by the freely positionable Pt100 sensors inside the chamber.
• Adjustment of three calibration values for temperature and additional appliance specific parameters directly at the ControlCOCKPIT

Cooling incubator with compressor technology for safe and reproducible incubation even at high ambient temperatures. Thanks to extensive programming options and homogeneous incubation conditions, the cooling incubator is suitable for a wide range of applications.

• APT.line™ preheating chamber technology
• Hot air disinfection at 100 °C
• Adjustable fan speed
• Controller with time-segment and real-time programming
• Inner door made of tempered safety glass
• 2 stainless steel racks
• Class 3.1 independent temperature safety device (DIN 12880) with visual and audible alarm
• Computer interface: Ethernet

Cooling incubator with Peltier technology combines exceptional performance with low energy consumption and environmental friendliness.

• APT.line™ preheating chamber technology
• Hot air disinfection at 100 °C
• Adjustable fan speed
• Controller with time-segment and real-time programming
• Inner door made of tempered safety glass
• 2 stainless steel racks
• Class 3.1 independent temperature safety device (DIN 12880) with visual and audible temperature alarm
• Computer interface: Ethernet
• Data recording and USB interface

Incubators with homogeneous temperature distribution ensure the best results for a wide range of incubation tasks.

• High temperature accuracy thanks to APT.line™ technology
• 100 °C disinfection routine
• High process reliability
• Controller with LCD display
• Electromechanical control of the exhaust air flap
• Inner door made of tempered safety glass
• 2 chrome-plated racks
• Chambers up to 115 l are stackable
• Class 3.1 integrated independent temperature safety device (DIN 12880) with visual alarm
• Ergonomic handle design
• USB connection for data recording

Incubators with homogeneous temperature distribution ensure the best results for a wide range of incubation tasks.

• High temperature accuracy thanks to APT.line™ technology
• 100 °C disinfection routine
• High process reliability
• Controller with LCD display
• Electromechanical control of the exhaust air flap
• Inner door made of tempered safety glass
• 2 chrome-plated racks
• Chambers up to 115 l are stackable
• Class 3.1 integrated independent temperature safety device (DIN 12880) with visual alarm
• Ergonomic handle design
• USB connection for data recording

Incubators for long-term stable continuous operation. Ideal for gentle incubation of organisms and other incubation tasks.

• APT.line™ preheating chamber technology
• Safe and reproducible results even with high batch throughputs in long-term operation
• Disinfection routine at 100 °C
• Adjustable exhaust air flap
• Controller with timer functions
• Inner door made of tempered safety glass
• 2 chrome-plated racks
• Class 3.1 independent temperature safety device (DIN 12880) with visual temperature alarm
• Computer interface RS 422

Incubators for long-term stable continuous operation. Ideal for gentle incubation of organisms and other incubation tasks.

• APT.line™ preheating chamber technology
• Safe and reproducible results even with high batch throughputs in long-term operation
• Disinfection routine at 100 °C
• Adjustable exhaust air flap
• Controller with timer functions
• Inner door made of tempered safety glass
• 2 chrome-plated racks
• Class 3.1 independent temperature safety device (DIN 12880) with visual temperature alarm
• Computer interface RS 422

Heating and cooling seamlessly with one system thanks to Peltier technology. In this respect, cooled incubators IPP not only contribute to climate protection, but it also achieves an additional decrease in operating costs of up to 90% compared to compressor technology.

• Extremely quiet, vibration-free and space saving as no compressor is required
• No condensation in the interior chamber: due to the closed Peltier cooling system no outside air is exchanged
• LED light module for sizes 110 to 750 (as an option): dimmable LED light in three alternative colour temperatures (cold white light, warm white light or cold white and warm white light, dimmable in steps of 1 %)