Volumetric flasks provide precise results in chemistry and pharmacy. They are not scaled, but have a single ring mark that is drawn all the way round the neck to avoid reading errors.
The narrow neck results in high setting accuracy. In addition, volumetric flasks have bulbous curves in the upper area so that any gas bubbles that form can escape from the solution more easily. However, if there are gas bubbles in the solution, the volumetric flask must be swivelled slightly so that the bubbles rise to the top. In addition to volumetric pipettes and burettes, volumetric flasks are therefore the most accurate volumetric instruments in the laboratory for analysis.
Filter
Filter
Racks for 50 ml centrifuge tubes, PA
LABSOLUTE®
The LABSOLUTE® racks for 15 ml (Ø 17 mm) and 50 ml (Ø 30 mm) centrifuge tubes are made of reinforced nylon and moulded in one piece.
Flat labelling area
Suitable for use in water bath
Available in two sizes
Autoclavable
...
expand_more
Click here to display 10 items
1
2
The LABSOLUTE® racks for 15 ml (Ø 17 mm) and 50 ml (Ø 30 mm) centrifuge tubes are made of reinforced nylon and moulded in one piece.
The LABSOLUTE® boxes made of PP are ideal for storage of 15 ml and 50 ml centrifuge tubes. The transparent lid provides good visibility of the tube, and the numerical index ensures rapid sample identification.
Dimensions (W x H x D): 145 x 130 x 145 mm
Suitable for storage at -80 °C
Autoclavable
...
expand_more
Click here to display 2 items
1
The LABSOLUTE® boxes made of PP are ideal for storage of 15 ml and 50 ml centrifuge tubes. The transparent lid provides good visibility of the tube, and the numerical index ensures rapid sample identification.
The stable, autoclavable LABSOLUTE® racks made of PP provide space for up to 5x 16 tubes (Ø well 11 mm). The wells are suitable both for 1.5 ml and 2.0 ml tubes and individually marked.
Available in different colours
Dimensions (W x H x D): 225 x 28 x 67 mm
...
expand_more
Click here to display 6 items
1
The stable, autoclavable LABSOLUTE® racks made of PP provide space for up to 5x 16 tubes (Ø well 11 mm). The wells are suitable both for 1.5 ml and 2.0 ml tubes and individually marked.
The practical, autoclavable LABSOLUTE® racks made of PP offer space for four different sizes of tubes: 4 x 50 ml (Ø well 30 mm) and 12 x 15 ml (Ø well 17.5 mm) conical centrifuge tubes, 32 x 1.5/2.0 ml (Ø well 11.6 mm) and 32 x 0.5 ml (Ø well 8.2 mm) tubes. The racks feature side links so that single racks can be united to one big entity....
expand_more
Click here to display 7 items
1
The practical, autoclavable LABSOLUTE® racks made of PP offer space for four different sizes of tubes: 4 x 50 ml (Ø well 30 mm) and 12 x 15 ml (Ø well 17.5 mm) conical centrifuge tubes, 32 x 1.5/2.0 ml (Ø well 11.6 mm) and 32 x 0.5 ml (Ø well 8.2 mm) tubes. The racks feature side links so that single racks can be united to one big entity.
The white LABSOLUTE® racks made of PP offer several options simultaneously. The samples can be safely stored either in a water bath, on ice or simply on the bench. The legs are detachable.
Suitable for 1.5 ml and 2.0 ml micro tubes
Available in round or square shape
Well Ø: 10.9 mm
...
expand_more
Click here to display 2 items
1
The white LABSOLUTE® racks made of PP offer several options simultaneously. The samples can be safely stored either in a water bath, on ice or simply on the bench. The legs are detachable.
The autoclavable LABSOLUTE® racks made of PP are suitable both for 96 (Ø well 5.2 mm) single 0.2 ml tubes and for strips of PCR tubes. The individual positions are marked with figures and letters which simplifies organization of your samples. With or without lid - the decision is yours: the hinged lid can be completely removed....
expand_more
Click here to display 4 items
1
The autoclavable LABSOLUTE® racks made of PP are suitable both for 96 (Ø well 5.2 mm) single 0.2 ml tubes and for strips of PCR tubes. The individual positions are marked with figures and letters which simplifies organization of your samples. With or without lid - the decision is yours: the hinged lid can be completely removed.
Made of PP. Stackable. Supplied in three parts and are easy to assemble. Alphanumeric grid referenced on top tier for easy identification of samples. Can be used in water baths. With large lateral marking area. Autoclavable....
expand_more
Click here to display 9 items
1
2
3
Made of PP. Stackable. Supplied in three parts and are easy to assemble. Alphanumeric grid referenced on top tier for easy identification of samples. Can be used in water baths. With large lateral marking area. Autoclavable.
expand_less
Close table
LLG-Cryogenic storage boxes, plastic coated, 136 x 136
LLG
Freezer and cryogenic storage boxes (CryoBoxes). Dimensions: 136 x 136mm square. For the storage of samples. Made of cardboard,
plastic coated without divider. With lid. Further colours available on request....
expand_more
Click here to display 18 items
Freezer and cryogenic storage boxes (CryoBoxes). Dimensions: 136 x 136mm square. For the storage of samples. Made of cardboard, plastic coated without divider. With lid. Further colours available on request.
Racks feature a unique system of tabs and slots, which facilitate easy assembly and sturdy fit to build as large as rack as you need. Heavy-duty polypropylene racks can hold 4 x 50 ml or 12 x 15 ml conical tubes, 32 x 1.5 ml or 32 x 0.5 ml microtubes. Autoclavable. Dimensions (L x W x H): 175 x 95 x 51 mm....
expand_more
Click here to display 7 items
Racks feature a unique system of tabs and slots, which facilitate easy assembly and sturdy fit to build as large as rack as you need. Heavy-duty polypropylene racks can hold 4 x 50 ml or 12 x 15 ml conical tubes, 32 x 1.5 ml or 32 x 0.5 ml microtubes. Autoclavable. Dimensions (L x W x H): 175 x 95 x 51 mm.
PP. For all common test tube diameters. Very sturdy design. All openings are widely spaced apart to accommodate screw cap tubes. All racks have the same footprint and can be stacked easily when empty. Modified PP with greater density than water makes them ideal for use in water baths. Large marking area (60 x 12mm) for barcode labels and alphanumeric references for clear sample identification. Racks are supplied in three parts for quick and permanent assembly. Continuous use temperature -20 to 90 °C. Autoclavable at 121 °C (2 bar), according to DIN EN 285. Choice of colours as outlined below....
expand_more
Click here to display 18 items
1
2
PP. For all common test tube diameters. Very sturdy design. All openings are widely spaced apart to accommodate screw cap tubes. All racks have the same footprint and can be stacked easily when empty. Modified PP with greater density than water makes them ideal for use in water baths. Large marking area (60 x 12mm) for barcode labels and alphanumeric references for clear sample identification. Racks are supplied in three parts for quick and permanent assembly. Continuous use temperature -20 to 90 °C. Autoclavable at 121 °C (2 bar), according to DIN EN 285. Choice of colours as outlined below.
Autoclavable. Popular fraction collector plate-style rack. Easily load and transfer 80 tubes with 1.5 ml or 2.0 ml in a compact format (5 x 16 array). Polypropylene rack has moulded-in coordinates to aid organisation. Assorted colours.
Dimensions (L x W x H): 225 x 67 x 28mm...
expand_more
Click here to display 8 items
1
Autoclavable. Popular fraction collector plate-style rack. Easily load and transfer 80 tubes with 1.5 ml or 2.0 ml in a compact format (5 x 16 array). Polypropylene rack has moulded-in coordinates to aid organisation. Assorted colours. Dimensions (L x W x H): 225 x 67 x 28mm
Autoclavable. Polypropylene rack has 96 wells for 0.5 ml microcentrifuge tubes on one side and 96 wells for 1.5 ml to 2.0 ml microcentrifuge tubes on the other side. Wells are arranged in standard 8 x 12 array. Handy lid snaps into place via tabs on each end of rack. Dimensions (L x W x H): 246 x 121 x 50 mm...
expand_more
Click here to display 6 items
1
Autoclavable. Polypropylene rack has 96 wells for 0.5 ml microcentrifuge tubes on one side and 96 wells for 1.5 ml to 2.0 ml microcentrifuge tubes on the other side. Wells are arranged in standard 8 x 12 array. Handy lid snaps into place via tabs on each end of rack. Dimensions (L x W x H): 246 x 121 x 50 mm
expand_less
Close table
Tube rack, PP
Isolab
Manufactured from high density polypropylene. Due to their weights, they do not float in the water baths, not even in agitated water. These racks are supplied dismantled and can be easily assembled . Autoclavable. A moulded-in alpha-numeric grid reference on the top tier of the rack allows easy sample identification....
expand_more
Click here to display 6 items
Manufactured from high density polypropylene. Due to their weights, they do not float in the water baths, not even in agitated water. These racks are supplied dismantled and can be easily assembled . Autoclavable. A moulded-in alpha-numeric grid reference on the top tier of the rack allows easy sample identification.
expand_less
Close table
Tube racks, PP
Kartell
Will not float. Alphanumeric grid referenced on top tier for easy identification of samples. Stackable when empty. Can be used in freezers or water baths. Autoclavable at 121°C for 20 min....
expand_more
Click here to display 20 items
1
Will not float. Alphanumeric grid referenced on top tier for easy identification of samples. Stackable when empty. Can be used in freezers or water baths. Autoclavable at 121°C for 20 min.
expand_less
Close table
Test tube racks, stainless steel
WDF
Corrosion resistant, stainless steel wire. Electrochemically polished. Opening size 18 x 18mm. Mesh grid levels are positioned at the top and 30mm above the base....
expand_more
Click here to display 4 items
1
Corrosion resistant, stainless steel wire. Electrochemically polished. Opening size 18 x 18mm. Mesh grid levels are positioned at the top and 30mm above the base.
Chemically resistant racks for transport or sample handling. The product range includes racks for most vessel shapes. Accomodates vessels safely thanks to square wells and three holding levels. Mesh or slotted bottom prevent the sample vessels from falling through and enable the loaded rack to be transported. For use at temperatures from -40 to 121 °C. Autoclavable....
expand_more
Click here to display 23 items
Chemically resistant racks for transport or sample handling. The product range includes racks for most vessel shapes. Accomodates vessels safely thanks to square wells and three holding levels. Mesh or slotted bottom prevent the sample vessels from falling through and enable the loaded rack to be transported. For use at temperatures from -40 to 121 °C. Autoclavable.
expand_less
Close table
Test tube racks, wire/nylon
WDF
Wire with white nylon coating. 3-tier design , second tier approximately 30 mm high. Opening size 18 x 18 mm. Temperature resistant up to 80 °C max....
expand_more
Click here to display 9 items
1
Wire with white nylon coating. 3-tier design , second tier approximately 30 mm high. Opening size 18 x 18 mm. Temperature resistant up to 80 °C max.
Thermo Scientific™ Nalgene™ Unwire™ test tube racks manufactured with Resmer™ Manufacturing Technology. 3-tier grid design. Will not float. Single moulding, with no sharp edges or corners. Alphanumeric grid referenced on top tier for easy identification of samples. End plates can be labelled or written on. Autoclavable....
expand_more
Click here to display 30 items
Thermo Scientific™ Nalgene™ Unwire™ test tube racks manufactured with Resmer™ Manufacturing Technology. 3-tier grid design. Will not float. Single moulding, with no sharp edges or corners. Alphanumeric grid referenced on top tier for easy identification of samples. End plates can be labelled or written on. Autoclavable.
Robust polypropylene construction. Simple, easy to open and close. Flatten for compact storage. Pops up for instant use. Expand and collapse when racks are needed. Printed grid aids rapid retrieval. Stack racks in open or closed position. Saves space when racks are not in use. Not recommended for steam sterilisation. Dimensions (L x W x H): 255mm x 137mm x 72mm when expanded, 21mm high when collapsed....
expand_more
Click here to display 4 items
1
Robust polypropylene construction. Simple, easy to open and close. Flatten for compact storage. Pops up for instant use. Expand and collapse when racks are needed. Printed grid aids rapid retrieval. Stack racks in open or closed position. Saves space when racks are not in use. Not recommended for steam sterilisation. Dimensions (L x W x H): 255mm x 137mm x 72mm when expanded, 21mm high when collapsed.
expand_less
Close table
Tube standing and draining racks, PP
Heathrow
Autoclavable, fiberglass-reinforced polypropylene racks are ideal for bench work or storage of test tubes. Allows easy viewing of tube contents. Does not float in water baths. User can also turn tubes as well as electrophoresis and chromatography plates upside-down and use as a drying rack. The flexible peg design is suitable for tubes with a diameter of 10mm to 13mm and 14mm to 17mm. Includes embossed indexing and drainage holes....
expand_more
Click here to display 4 items
Autoclavable, fiberglass-reinforced polypropylene racks are ideal for bench work or storage of test tubes. Allows easy viewing of tube contents. Does not float in water baths. User can also turn tubes as well as electrophoresis and chromatography plates upside-down and use as a drying rack. The flexible peg design is suitable for tubes with a diameter of 10mm to 13mm and 14mm to 17mm. Includes embossed indexing and drainage holes.
expand_less
Close table
Microtube Rack, 20-Well, PP
Heathrow
Interlocking racks with 2 x 10 array hold 0.5/1.0/1.5/2.0ml tubes.
Polypropylene racks lock together on each side, permitting the user to attach several together to increase capacity.
Features an innovative "hold-it" finger slot on the front, and internal ribbing for stability. Autoclavable....
expand_more
Click here to display 1 items
1
Interlocking racks with 2 x 10 array hold 0.5/1.0/1.5/2.0ml tubes. Polypropylene racks lock together on each side, permitting the user to attach several together to increase capacity. Features an innovative "hold-it" finger slot on the front, and internal ribbing for stability. Autoclavable. Dimensions: 210mm x 90 mm x 46 mm.
expand_less
Close table
Test tube rack, PP, "monoblock"
Isolab
Blue. Manufactured from high density polypropylene. Moulded-in alpha numeric grid reference on the top tier of the rack allows easy sample identification. Due to their weights, they do not float in the water baths. Autoclavable....
expand_more
Click here to display 5 items
Blue. Manufactured from high density polypropylene. Moulded-in alpha numeric grid reference on the top tier of the rack allows easy sample identification. Due to their weights, they do not float in the water baths. Autoclavable.
expand_less
Close table
Test tube racks, wire/nylon
WDF
White nylon coated or stainless steel wire, electrochemically polished. 3-tier design, second tier approximately 30mm high. For 50ml test tubes....
expand_more
Click here to display 6 items
1
White nylon coated or stainless steel wire, electrochemically polished. 3-tier design, second tier approximately 30mm high. For 50ml test tubes.
Two-tier, available in four different colours. These versatile racks are autoclavable and can be used dry, in water baths or in freezers. Each rack has an alpha-numeric reference for easy sample identification. Can accomodate 100x1.5ml tubes with closed caps or without caps, and 50x1.5ml tubes with open caps. Racks are stackable even when loaded and have (purpose) designed label spaces on each side (for bar coding, etc.)....
expand_more
Click here to display 4 items
Two-tier, available in four different colours. These versatile racks are autoclavable and can be used dry, in water baths or in freezers. Each rack has an alpha-numeric reference for easy sample identification. Can accomodate 100x1.5ml tubes with closed caps or without caps, and 50x1.5ml tubes with open caps. Racks are stackable even when loaded and have (purpose) designed label spaces on each side (for bar coding, etc.).
expand_less
Close table
Tube Rack Rota-Rack®, PP
Heathrow
Interlocked racks. Rotate each of the four modules independently. Use several sizes of test tubes, culture tubes, centrifuge tubes or microcentrifuge tubes at the same time. Autoclavable.
Each module of the Rota-Rack
® for large tubes holds 2 x 50ml tubes, 8 x 15ml tubes, 6 x 20mm tubes or 10 x 10/13mm tubes. Each module of the Rota-Rack...
expand_more
Click here to display 2 items
1
Interlocked racks. Rotate each of the four modules independently. Use several sizes of test tubes, culture tubes, centrifuge tubes or microcentrifuge tubes at the same time. Autoclavable. Each module of the Rota-Rack® for large tubes holds 2 x 50ml tubes, 8 x 15ml tubes, 6 x 20mm tubes or 10 x 10/13mm tubes. Each module of the Rota-Rack® for microtubes holds 6 x 15ml tubes, 9 x 1.5/2.0ml tubes, 12 x 0.5ml tubes or 32 x 0.2ml PCR tubes or 4 x 8-tube strips.
expand_less
Close table
Tube Rack, ABS
Isolab
Made of "modified" high density ABS which enables the rack to be used in water baths. Racks can be linked together to form a multiple rack system. Rod type spacious tube compartments are ideal for screw cap tubes of 15 ml and 50 ml. Unique rack design enables perfect adaptance of the tubes and allows easy viewing of the tube contents. Pegs hold the tubes firmly in place and remain straight even after repeated autoclaving. Interlocking system for linking the racks in multiple rows....
expand_more
Click here to display 2 items
Made of "modified" high density ABS which enables the rack to be used in water baths. Racks can be linked together to form a multiple rack system. Rod type spacious tube compartments are ideal for screw cap tubes of 15 ml and 50 ml. Unique rack design enables perfect adaptance of the tubes and allows easy viewing of the tube contents. Pegs hold the tubes firmly in place and remain straight even after repeated autoclaving. Interlocking system for linking the racks in multiple rows.
expand_less
Close table
Eppendorf Tube Racks, PP
Eppendorf
Numbered positions for easy handling and identification
Made of high quality polypropylene (PP) for chemical and physical resistance
Temperature stability from -86 °C to 121 °C
Autoclavable (121 °C, 20 min)
Laboratory washer-safe for easy cleaning
Stackable to save lab space
...
expand_more
Click here to display 5 items
1
2
3
4
5
Numbered positions for easy handling and identification
Made of high quality polypropylene (PP) for chemical and physical resistance
Temperature stability from -86 °C to 121 °C
Autoclavable (121 °C, 20 min)
Laboratory washer-safe for easy cleaning
Stackable to save lab space
expand_less
Close table
PCR Multirack, PP
Isolab
Fully autoclavable. This storage/working rack, with lid, is designed to work with different PCR volumes at the same time. It can accommodate up to 32 individual 0.2 ml PCR tubes, 24 pieces of 1.5 / 2.0 ml and 16 pieces of 0.5 ml microtubes. Tube wells are alpha-numerically matrixed with raised bold type for accurate sample identification. The rack also has a transparent lid for easy viewing of samples. Frosted writing panels on four sides allow labelling or writing....
expand_more
Click here to display 1 items
Fully autoclavable. This storage/working rack, with lid, is designed to work with different PCR volumes at the same time. It can accommodate up to 32 individual 0.2 ml PCR tubes, 24 pieces of 1.5 / 2.0 ml and 16 pieces of 0.5 ml microtubes. Tube wells are alpha-numerically matrixed with raised bold type for accurate sample identification. The rack also has a transparent lid for easy viewing of samples. Frosted writing panels on four sides allow labelling or writing.
expand_less
Close table
Tube Rack Adapt-a-Rack™, POM
Heathrow
Capable of holding different size tubes in each available slot as the well literally adapts to your tube size to hold firming in an upright position. The design enables you to hold 12 to 30mm (5 to 50ml) tubes simultaneously and still allow full viewing of the tube label. Racks can be linked together for additional holding capacity. Autoclavable. Dimensions (W x D x H): 181 x 56 x 76mm...
expand_more
Click here to display 8 items
Capable of holding different size tubes in each available slot as the well literally adapts to your tube size to hold firming in an upright position. The design enables you to hold 12 to 30mm (5 to 50ml) tubes simultaneously and still allow full viewing of the tube label. Racks can be linked together for additional holding capacity. Autoclavable. Dimensions (W x D x H): 181 x 56 x 76mm
expand_less
Close table
Rack for centrifuge tubes, PP
Isolab
Suitable to hold 15 ml and 50 ml centrifuge tubes with conical bottom. Just push the tubes into the cavities and leave them. Unique design has an angular end to provide easy stacking for space saving purpose. Moulded in alpha numeric grid reference on the rack allows easy sample identification....
expand_more
Click here to display 2 items
Suitable to hold 15 ml and 50 ml centrifuge tubes with conical bottom. Just push the tubes into the cavities and leave them. Unique design has an angular end to provide easy stacking for space saving purpose. Moulded in alpha numeric grid reference on the rack allows easy sample identification.
expand_less
Close table
Test tube racks, PP
Agilent
Blue. For tubes up to 18mm in diameter. Autoclavable and unbreakable. Can be dismantled. Can be recycled....
expand_more
Click here to display 2 items
1
Blue. For tubes up to 18mm in diameter. Autoclavable and unbreakable. Can be dismantled. Can be recycled.
Ideal for handling hot tubes or to heat test tubes up to 30 mm diameter. Manufactured from stainless steel with a finger grip. With a long arm for better handling and to avoid close contact between fingers and the flame. High resistance to heat up to 100°C....
expand_more
Click here to display 1 items
Ideal for handling hot tubes or to heat test tubes up to 30 mm diameter. Manufactured from stainless steel with a finger grip. With a long arm for better handling and to avoid close contact between fingers and the flame. High resistance to heat up to 100°C.
expand_less
Close table
Test tube racks Switch-Grid™, POM
Bel-Art
This split-frame rack holds up to two different grid inserts. Grid inserts must be ordered separately.
Three tier rack
With rubber feets
Stackable
Chemical resistant
Autoclavable at 121°C
...
expand_more
Click here to display 1 items
This split-frame rack holds up to two different grid inserts. Grid inserts must be ordered separately.
Stackable racks with alphanumerical positions. Operating temperature -20 °C to +90 °C. Autoclavable at 121 °C (2 bar), acc. DIN EN 285. Density 1.2 g/cm³. Will not float in water bath. Racks are supplied in two-pieces (Ø 11 mm, for micro tubes) or three-pieces (Ø 13 mm for cryogenic tubes) for convenient and permanent assembly....
expand_more
Click here to display 6 items
1
Stackable racks with alphanumerical positions. Operating temperature -20 °C to +90 °C. Autoclavable at 121 °C (2 bar), acc. DIN EN 285. Density 1.2 g/cm³. Will not float in water bath. Racks are supplied in two-pieces (Ø 11 mm, for micro tubes) or three-pieces (Ø 13 mm for cryogenic tubes) for convenient and permanent assembly. Dimensions (l x w x h): 265mm x 126mm x 38mm.
Autoclavable. Our user-friendly cube racks are a must for any laboratory. Accommodate 4 x 50ml tubes, 10 x 15ml conical tubes, 12 x 75mm or 12 x 100mm tubes or 16 x 1.5 to 2.0ml microcentrifuge tubes. Polypropylene racks slide together, allowing you to work with different tubes on as many connected racks as desired. Available in natural or assorted colours (blue, green, yellow orange and pink). Dimensions: 108 x 108 x 114mm....
expand_more
Click here to display 1 items
Interlock on all sides.
Autoclavable. Our user-friendly cube racks are a must for any laboratory. Accommodate 4 x 50ml tubes, 10 x 15ml conical tubes, 12 x 75mm or 12 x 100mm tubes or 16 x 1.5 to 2.0ml microcentrifuge tubes. Polypropylene racks slide together, allowing you to work with different tubes on as many connected racks as desired. Available in natural or assorted colours (blue, green, yellow orange and pink). Dimensions: 108 x 108 x 114mm.
behrotest
® standard digestion vessels have standard dimensions. That means they fit into digestion and distillation units of most brands. Of course, it also means that standard digestion vessels of most brands can be used with behr distillation units....
expand_more
Click here to display 18 items
1
behrotest® standard digestion vessels have standard dimensions. That means they fit into digestion and distillation units of most brands. Of course, it also means that standard digestion vessels of most brands can be used with behr distillation units.
Blue. Safe storage and transport of cryogenic vials.
Drainage holes in each well
Alphanumeric identification
Temperature resistant up to -196 °C
Autoclavable
...
expand_more
Click here to display 1 items
1
Blue. Safe storage and transport of cryogenic vials.
Drainage holes in each well
Alphanumeric identification
Temperature resistant up to -196 °C
Autoclavable
expand_less
Close table
Microtube Rack Rota-Rack® Duo
Heathrow
Works with PCR
® tubes right next to centrifuge tubes. The 0.2ml tube wells oriented in standard 96-well format. Use with PCR
® transfer trays. Rotate the rack to work either with 0.2ml tubes and 0.5ml tubes, with 0.2ml tubes and 1.5ml tubes or with 0.5ml tubes and 1.5ml tubes. Or turn a module and work with a total of 96 x 1.5ml tubes. Quickly identify tubes with imprinted alphanumeric system. Autoclavable. Dimensions (L x W x H): 296 x 118 x 34mm...
expand_more
Click here to display 1 items
1
Works with PCR® tubes right next to centrifuge tubes. The 0.2ml tube wells oriented in standard 96-well format. Use with PCR® transfer trays. Rotate the rack to work either with 0.2ml tubes and 0.5ml tubes, with 0.2ml tubes and 1.5ml tubes or with 0.5ml tubes and 1.5ml tubes. Or turn a module and work with a total of 96 x 1.5ml tubes. Quickly identify tubes with imprinted alphanumeric system. Autoclavable. Dimensions (L x W x H): 296 x 118 x 34mm
expand_less
Close table
Rack for centrifuge tubes, ABS
Isolab
Can be used for tubes with a diameter up to 16 mm. Rack comes as "ready" unit, no assembly is required. Bottom of each tube compartment has a silicone gripping finger that holds the tube at centralised position. Not recommended for autoclaving. With Push & Eject funktion. Holds up to 50 tubes in 5 x 10 layout....
expand_more
Click here to display 1 items
Can be used for tubes with a diameter up to 16 mm. Rack comes as "ready" unit, no assembly is required. Bottom of each tube compartment has a silicone gripping finger that holds the tube at centralised position. Not recommended for autoclaving. With Push & Eject funktion. Holds up to 50 tubes in 5 x 10 layout.
Measuring flasks are an important instrument in numerous scientific and industrial applications. Their versatility makes them indispensable for the precise preparation of solutions and for volumetric analyses.
They are crucial for preparing reagents for experiments and reliably checking formulations and concentrations in the pharmaceutical industry. They are also useful aids in educational institutions such as schools, especially in subjects such as physics and chemistry.
helpers.
Highest quality volumetric flasks from Th. Geyer
Th. Geyer offers you a comprehensive range of volumetric flasks that are specially tailored to your individual needs. Benefit from our high standards of quality, safety and functionality. For over 130 years, we have been a reliable partner to numerous satisfied companies, organisations and public institutions.
institutions.
Whether for analytics, research or science - we are a full-range supplier. Our volumetric flasks and other products for your laboratory requirements fulfil all legal requirements. We are certified according to ISO 9001:2015 and comply with all directives of the EU regulation
REACH.
High-quality volumetric flasks for every requirement
Measuring flasks are essential for precise volume measurements in the production of chemical solutions and when carrying out analytical processes. At Th. Geyer you will find
a large selection of high-quality volumetric flasks in various sizes, materials and designs, with which you can ensure maximum accuracy when measuring a specific volume in chemistry and other natural sciences.
With their pear-shaped or conical design and sophisticated features, our models are ideal for a wide range of applications.
areas of application.
Our range boasts many different models made of high-quality borosilicate glass or plastic. They are calibrated to "In" and "Ex", graduated in blue or white and comply with DIN EN ISO
1042:
LABSOLUTE® Class A volumetric flasks with PE stopper or with hollow glass stopper
LABSOLUTE® Class A volumetric flasks in trapezoidal shape graduated in blue or white
DURAN® Class A volumetric flasks with PE stopper or with amber glass stopper
Nalgene™ volumetric flasks
Class B volumetric flasks made of PP with screw cap
BLAURAND® graduated cylinder with high mould and individual USP certificate
Variants for determining the oil content
Variants for sugar analysis
Dosing attachments for automatic tilting machines of the DURAN® tube
and much more
Excellent volumetric flasks and top advice
At Th. Geyer, you can order safely and easily from a single experienced source. You will receive both small and large quantities of volumetric flasks of the highest quality at an attractive price-performance ratio. Still haven't found what you're looking for? Browse through related product categories, such as graduated cylinders and
mixing cylinders.
We look forward to your personal enquiry and will be happy to advise you personally and individually. Simply contact us without obligation. We are here for you
here for you