Diaphragm pumps

The LABSOLUTE® labelling tapes can be used to label test tubes or colour code laboratory utensils. The tapes are easy to label and leave no sticky residue when removed. They are temperature resistant from -23 - 121 °C.

Core diameter 25 mm.

Compilation of the rainbow mix:
7695407: 3 x blue, 3 x green, 3 x orange, 3 x red, 5 x white, 4 x yellow and 3 x pink
7695415: 2 x blue, 2 x green, 2 x orange, 2 x red, 4 x white, 2 x yellow and 2 x pink
7695423: 1 x blue, 2 x green, 1 x orange, 2 x red, 2 x white, 2 x yellow and 2 x pink

The LABSOLUTE® labelling tapes can be used to label test tubes or colour code laboratory utensils. The tapes are easy to label and leave no sticky residue when removed. They are temperature resistant from -23 - 121 °C.

Core diameter 76 mm.

LABSOLUTE® labels are self-adhesive and have a size of 26 x 37 mm. They are used to designate your materials using the universally applicable hazard symbols of the GHS system (Globally Harmonized System of classification and labelling of chemicals).

• Made of PE (thickness: 0.1 mm) with additional protective lacquer
• Signal word in three languages (German, English and Danish)
• Waterproof and solvent-resistant
• Available in handy dispenser boxes

The LABSOLUTE® labelling tape dispensers are ideal for organizing the labelling tapes. Single tapes can be replaced without having to remove all tapes.

The LABSOLUTE® labelling tapes can be used to label test tubes or colour code laboratory utensils. The tapes are easy to label and leave no sticky residue when removed. They are temperature resistant from -23 - 121 °C.

Core diameter of 25 mm.

The LABSOLUTE® labelling tapes can be used from the labelling of test tubes to the colour coding of laboratory utensils. The tapes are easy to label and leave no sticky residue when removed.

Compilation of the rainbow mix:
7695407: 3 x blue, 3 x green, 3 x orange, 3 x red, 5 x white, 4 x yellow und 3 x pink
7695415: 2 x blue, 2 x green, 2 x orange, 2 x red, 4 x white, 2 x yellow und 2 x pink
7695423: 1 x blue, 2 x green, 1 x orange, 2 x red, 2 x white, 2 x yellow und 2 x pink

Dispenser box of 250 labels. These labels are produced using an extremely resistant 100µm PE film. Due to their special surface coating they are resistant to most solvents and excellent for indoor or outdoor use. The strong adhesive, although permanent, can be removed from glass containers without leaving any trace.
Trilingual signal word: German, English, French.
Available in 2 sizes.

Ø 9.5mm. Self-adhesive. Printing protected. For labeling of 0.5 to 2.0ml microtubes that contains potentially hazardous substances. The labels have excellent heat resistance, chemical resistance and UV resistance and a very good adhesion to various materials, even on rough or non-polar surfaces such as on plastics with low surface energy. The material is UL certified. (File MH26760).
1000 labels per roll, in dispensing box.

Comply indicator tapes are process indicators and the ideal solution for securely sealing a wide variety of sheet packaging. For sterilisation with steam, hydrogen peroxide (H₂O₂) or hot air.

• Clear colour change visible
• Easily readable result
• Direct labelling possible
• No ink transfer to adhesive or other packaging
• Stretchable, reduces the risk of tearing
• Latex free
• Solvent free
• Lead-free

Crepe paper, adhesive. With indicator. Colour changes according to DIN EN ISO 11140-1. Rolls of 50 m.

Specially coated plastic tape with adhesive backing. Makes labels of any length. Can be used with any pens. Excellent adhesion to glass, metal, PE, etc. Resistant to humidity, as well as acids and alkali solutions in weak concentrations. Leaves no residue when removed.

Strong, brown tape.

SOLVENT 50 is a highly effective label solvent for the effortless removal of self adhesive labels on the basis of natural orange terpenes. It works on the adhesive and quickly and gently dissolves adhesive labels on glass, porcelain, metal, wood, foil and cardboard. SOLVENT 50 also removes sticky residue of any kind, such as tar spots or glue residue from stickers. Check compatability when using on plastics. Not suitable for polystyrene.

SOLVENT 50 SUPER ist the label remover with brush and NSF K3-Registration for use in the food industriy. The optimised formula has high dissolving capacity to remove paper labels and all kinds of adhesive residues.

Brady laboratory labels are designed to withstand extreme laboratory environments. The labels are rersistent against high/low temperatures, solvents and chemicals (Alcohol and DMSO).

Temperature resistant from -40°C to 121°C. Tough-Tags resist boiling water baths, autoclaving and moderate freezer temperatures. Chemically inert labels resist most organic solvents and caustic agents. They adhere to most plastics, glass and metals without cracking, peeling and degrading. Tubes are pre-cut, peel-off labels which accept many marking instruments. They are perfectly sized to fit microcentrifuge tubes and other containers in the laboratory. Tubes labeled with Tough-Tags^® easily slide in and out of centrifuge rotors without binding.

Temperature resistant from -196 °C to 150 °C. All labels withstand freezer temperatures down to -196 °C (liquid and vapour phase nitrogen), boiling water baths, autoclaving and moderate ovens (150 °C). Chemically inert labels resist most organic solvents and caustic agents. They adhere to most plastics, glass and metals without cracking, peeling or degrading. Made with a flexible, polyolefin label material and acrylic adhesive. This unique combination expands and contracts together with temperature fluctuations resulting in a strong adhesive bond. Convenient dispensing box assists in labeling individual tubes used in small experiments. Easy to write on. PVC labels accept writing from most lab markers including solvent resistant pens.

tesapack^®4124, transparent.

Self-adhesive deep-freeze labels on A4 sheets. Perfect for all PC printers (laser/inkjet/dot-matrix), copiers and multi-functional machines. Suitable for colour printers and copiers.

• Chlorine-free bleached special paper, PEFC-certified
• Solvent-free adhesive
• Label paper and adhesive are extremely resistant to temperatures (down to -60 °C, Min. adhesive temperature: -25 °C)
• Good adhesive properties at normal temperatures

Adhesive tape for label protection
Clear polyester tape with special synthetic adhesive. Resistant to moisture and most solvents. Test results prove the tape remains securely affixed with no discoloration after being autoclaved for 40 minutes at 125 ºC, as well as after one week in liquid nitrogen at -196 °C. All tape sizes are 1 mil thick with 1 mil of acrylic adhesive. Excellent adhesion to glass, metal, PE etc. Supplied in rolls as outlined below.

Tape dispenser
Durable tape dispenser is molded of strong ABS plastic with a steel serrated cutting blade; tape roll held in place by aluminum roller and spring-loaded cover. Includes four non-slip rubber feet and screws. Dimensions (L x W x H): 206 x 117 x 60 mm.

Pre-cut Peel-off round lables for 0.5 and 1.5/2.0ml microcentrifuge tube tops. Temperature resistant from -196 °C to 80 °C. Easy to write on: PVC labels accept writing from most lab markers. Convenient: Dispensing box assists in labeling individual tubes used in small experiments.