Trace analysis accessories

Colourless pouring ring TpCh260, height 4mm. Temperature resistant from -196°C to +260°C.

With PTFE coated silicone seal. Colourless (to avoid risk of leaching) and temperature resistant from -196 °C to 200 °C. Ideal for dry sterilization. USP/FDA standard conformity. DFM available on request. Autoclavable. With Retrace code (Batch Identification). Certificate available via the internet.

These spatulas are designed for use in the most severe laboratory conditions. They are made of nickel-plated stainless steel and fluoropolymer coating. The coating eliminates surface buildup or loss of valuable sample due to sticking. Will not scratch or damage delicate surfaces.

• Extra heavy-duty PTFE coatings
• Resistant to low and high temperatures
• Use for handling chemically active materials

Ultra-pure, virgin PTFE chips promote gentle, efficient boiling and help prevent overheating, even of highly volatile liquids. Ideal for continuous extraction methods. Stones minimize "bumping" during reflux and distillation. The boiling stones are not affected by acids, hydrocarbons, ketones, esters, alcohols or alkalis. They are easily cleaned and non-contaminating. Shows no trace of face acidity or alkalinity. They will not scratch or abrade glassware and leave no residue. Usable up to 288°C.

• Chemical resistant
• Ideal for boiling organic liquids
• Minimizes superheating

These spatulas are designed for use in the most severe laboratory conditions. They are made of nickel-plated stainless steel and fluoropolymer coating. The coating eliminates surface buildup or loss of valuable sample due to sticking. Will not scratch or damage delicate surfaces.

• Extra heavy-duty PTFE coatings
• Resistant to low and high temperatures
• Use for handling chemically active materials

DIN EN ISO 15528. For liquids. Made of ultra pure and chemically inert PTFE/FEP for contamination-free sampling. Practical push button, single-handed operation. Suitable for point, cross-sectional, and bottom sampling. Ideal for sampling from open and closed drums, kegs, tanks, silos, water sources (ponds, lakes, streams, rivers). Suitable for all commercial kegs and drums with openings of at least 32 mm diameter. All surfaces are non-porous and crevice-free preventing accumulation of dirt. Only round-profile screwthreads, suitable for food hygiene applications, are used. Simple to dismantle and clean.

Forceps are made of nickel-plated steel and have an extra heavy-duty coating of PTFE. The forceps have the same great features as the spatulas and tongs.

• Ridged grips prevent slips
• Inner pin retains closed position
• Rounded precision tip for accuracy and safety

PTFE balls minimize "bumping" during boiling. They are inert and can be used up to 288°C. 100 balls per package.

• For column packing and mixing beds
• Resistant to most chemicals
• Non-contaminating