-
- General laboratory consumables
- Occupational safety, Security
- Analytical measurement and testing
- Stirring, Shaking, Mixing
- Sample preparation
- Distillation, separation, filtration
- Heating and cooling technology
- Liquid Handling
- Vacuum technology, Drying, Dry storage
- Optical instruments and microscopes
- Cleaning and sterilisation
- Environmental-, soil-, water-, food analysis
- Chromatography
- Cleanroom
Trace analysis accessories
Aluminum tape 100m x 500mm 80 μm thick, soft, smooth
LLG
PO number | Package size | Price per package | |||
---|---|---|---|---|---|
6303623 This product of our assortment corresponds with your search. |
1 piece | Login / Register here |
|
Premium screw cap, PFA
With PTFE coated silicone seal. Colourless (to avoid risk of leaching) and temperature resistant from -196 °C to 200 °C. Ideal for dry sterilization. USP/FDA standard conformity. DFM available on request. Autoclavable. With Retrace code (Batch Identification). Certificate available via the internet....
Spoon spatulas, PTFE fluoropolymer, coated
These spatulas are designed for use in the most severe laboratory conditions. They are made of nickel-plated stainless steel and fluoropolymer coating. The coating eliminates surface buildup or loss of valuable sample due to sticking. Will not scratch or damage delicate surfaces.
- Extra heavy-duty PTFE coatings
- Resistant to low and high temperatures
- Use for handling chemically active materials
Boiling Stones, PTFE
Ultra-pure, virgin PTFE chips promote gentle, efficient boiling and help prevent overheating, even of highly volatile liquids. Ideal for continuous extraction methods. Stones minimize "bumping" during reflux and distillation. The boiling stones are not affected by acids, hydrocarbons, ketones, esters, alcohols or alkalis. They are easily cleaned and non-contaminating. Shows no trace of face acidity or alkalinity. They will not scratch or abrade glassware and leave no residue. Usable up to 288°C....
Forceps, PTFE Fluoropolymer, coated
Forceps are made of nickel-plated steel and have an extra heavy-duty coating of PTFE. The forceps have the same great features as the spatulas and tongs.
- Ridged grips prevent slips
- Inner pin retains closed position
- Rounded precision tip for accuracy and safety
Sampler LiquiSampler, PTFE/FEP
DIN EN ISO 15528. For liquids. Made of ultra pure and chemically inert PTFE/FEP for contamination-free sampling. Practical push button, single-handed operation. Suitable for point, cross-sectional, and bottom sampling. Ideal for sampling from open and closed drums, kegs, tanks, silos, water sources (ponds, lakes, streams, rivers). Suitable for all commercial kegs and drums with openings of at least 32 mm diameter. All surfaces are non-porous and crevice-free preventing accumulation of dirt. Only round-profile screwthreads, suitable for food hygiene applications, are used. Simple to dismantle and clean....
Double-ended spatulas, PTFE fluoropolymer, coated
These spatulas are designed for use in the most severe laboratory conditions. They are made of nickel-plated stainless steel and fluoropolymer coating. The coating eliminates surface buildup or loss of valuable sample due to sticking. Will not scratch or damage delicate surfaces.
- Extra heavy-duty PTFE coatings
- Resistant to low and high temperatures
- Use for handling chemically active materials
Bytac® Bench protectors
Bytac ® Bench protectors, FEP Film with Vinyl or Aluminum Backing. Inert to most chemicals - Non-stick; easy to clean - Use to resurface bench tops and line fume hoods. Contrasting work surface for viewing color changes during titrations. Protects surfaces against absorption of radioactive chemicals. Vinyl backing is recommended for all applications up to 93°C. Aluminium foil-backing is resistant to high temperatures up to 182°C for up to one hour....
COLORIS™ colored identification clips
GLP friendly, these colored clips identify or personalize your PIPETMAN ® by snapping on to the connecting nut to help avoid mix-ups. Made of polyacetal, they can be marked with permanent ink to indicate your name or application. COLORIS™ comes in 5 bright colors: red, green, yellow, blue and white....
Dipper/Sieve Chemware®, PFA
Resistant to most chemicals, the articles are ideal for ultra-pure applications and use with aggressive media. Handle design allows dipper to hook over edge of vessel, eliminating dripping of corrosive fluids onto surrounding surface. Use with containers that have at least an 80 mm opening. The sieve mesh size is available in 1.0 mm....
Ductless Fume Hoods Type Ascent Opti™
Compact, energy saving fume hood without ducting system.
- Independently tested and complies with AFNOR NFX 15-211 standard
- Average Inflow Air Velocity: 0.5m/s
- Easy Filter change
- Sentinel-Microprocessor with LCD-Display, air velocity alarm and 24-hour-clock
- Fluorescent lighting provides superior illumination of the work zone
- Sloped acrylic front window
- With transparent back wall (for type SPD-4B1)
- Acrylic side walls
- ISOCIDE™ antimicrobial coating on all painted surfaces minimises contamination.
- Stainless steel spill-retaining work top.
- Sampling port
- Pass-through ports in the back wall
- Pre-filter made of polyester fibre, EU3 rating is included
Fume Hoods LABOPUR® H Series
Manipulation of liquid chemicals and powders where and when needed.
Advantages: eliminates installation costs, saves substantially capital and running costs, mobile and easy to relocate wherever needed; protects the user and environment against toxic fumes. Low Energy consumption: less than 200 KWh /year (for 2100 hours usage)...
Light measuring instrument SO
Light measuring instrument for precise light measurement up to 200,000 Lux
- Measures illumination in the workplace
- Helps to determine whether a workstation has insufficient light or whether there is too much light
- Photo sensor: silicon diode
- Cosine correction for angular incident light
- Sturdy protective cover for the photo sensor
- Increased service life: Impact protection through a protective casing
- Track function for continuous recording of variable environmental conditions
- Peak Hold Mode to capture peaks
- Selectable measuring units: fc (foot-candle), lx
- AUTO-OFF function
- Delivery in a robust box
PIPETMAN® L 8-channel pipette
PIPETMAN® L is a mechanical air-cushion pipette with a patented volume locking system that eliminates the need to adjust the volume during pipetting. Due to the innovative ejection system with a lever arm the ejection forces are very low. In addition, the eject button is adjustable, so that it can be comfortably operated by both right- and left-handed users. PIPETMAN® L has a 2D identification code....
Sampler ViscoSampler, PTFE/FEP
Ultra-pure sampler with powerful suction for viscousmedia. Specially developed for viscous substances, such as slurries, silt, wet clay and soil samples, sediments, oils, emulsions and creams. The suction flask sucks up and discharges the material. All surfaces are non-porous and crevice-free, preventing dirt accumulation. Only round-profile threads, suitable for food hygiene applications, are used. Allow easy dismantling and cleaning....
Stirring Rods, PTFE® Fluoropolymer
Contains fully enclosed steel insert for stiffness, yet can be bent to various shapes for use as a powered stirrer. Heat resistant to 288°C and completely inert to highly corrosive reagents. Antistick properties facilitate cleaning.
- Inert to corrosives
- Easy to clean
- Bendable into shapes
THE JIMMY™ microtube opener
This ergonomic, hands-free microtube opener is your thumb's best friend. It fits your PIPETMAN® pipette perfectly and can open both snap-cap and screw-cap microtubes. Made of high quality polyacetal, THE JIMMY™ can be cleaned with alcohol or sterilized by autoclaving. It is sold in a set of three colors: orange, yellow and white....