Autoklaves, Accessories

Crepe paper, adhesive. With indicator. Colour changes according to DIN EN ISO 11140-1. Rolls of 50 m.

Laboratories are very concerned about hygiene, cleanliness and comfort in the workplace. Try Anabac^® autoclave deodorant balls to improve the working environment in the laboratory. These autoclave deodorant balls bring a discrete scent that speaks of cleanliness.

Class 4 Multi-Variable Steam Indicator Strips
Class 4 Multi-Variable Steam indicator strips are designed to be used in steam sterilizers operating at 134 °C -3.5 minutes. The indicator strips can be used in every pack and will provide assurance of steam penetration into the packs.The water based and non-toxic chemical indicator in compliance with ISO 11140-1 will show a clear and accurate color change from blue to black after successful steam sterilization. PMSSteriTest indicator strips are cost effective and can be divided into two separate pieces for more economical use.

• Dual Strip design
• Designed for STEAM sterilization at 134 °C - 3.5 minutes.
• Water based, non-toxic chemical indicator comply to ISO 11140-1
• Clear and accurate color change from blue to black
• Manufactured in absence of lead or other heavy metals

• Single Strip design
• Designed for STEAM sterilization at 134 °C - 3.5 minutes.
• Designed for STEAM sterilization at 121 °C - 15 minutes.
• Water based, non-toxic chemical indicator comply to ISO 11140-1
• Clear and accurate color change from blue to lilac
• Manufactured in absence of lead or other heavy metals

These Bowie-Dick Test Packs are pre-assembled, single use test packs designed to evaluate the performance of the air removal system of pre-vacuum assisted sterilisers in compliance with EN 285 and operating at 134 °C and 3.5 minutes. An indicator sheet printed with water based, non-toxic chemical indicator is placed in the center of each pack. The uniform colour change of the indicator after steam sterilisation indicates that all air was removed and replaced by steam. The backside of the indicator sheet contains fields to be filled out and it can be kept as a permanent record for traceability purposes.

• Disposable, pre-assembled and ready to use test packs
• Designed for STEAM sterilization at 134 °C - 3.5 minutes.
• Clean and accurate indicator color change
• Indicator sheet can be kept as a permanent record
• Validated for 4 kg and 7 kg sterilisation load
• Manufactured in absence of lead or other heavy metals

Service kit 1: with lid gasket, valve gasket, gasket for exhaust cock and manometer, steam valve
Service kit 2: with lid gasket, control valve gasket, seals for exhaust cock and pressure gauge, steam valve and safety valve
Service kit 3: with door gasket, safety valve and bacteria filter

This Rotary Sealer is an entry model which is solid, durable and extremely easy to use. Once power is on and the variable temperature adjustment has been done, the Rotary Sealer works when it's needed and stops automatically when the work is done. The basic rotary sealer is microprocessor controlled and the temperature can be adjusted anytime easily. The sensitive temperature ranging between50 °C and 250 °C provides the user with flexibility to seal different kinds of packaging such as paper/film and Tyvek^® pouches. Automatic feeding driven by optical sensors and multiline sealing technique ensure optimum seal strength at continuous operations. This sealing system is validated, calibrated and in compliance with international standards.

The DURAN^® Screw Cap GL 45 thermocouple holder consists of a holder fitted into a blue DURAN^® polypropylene GL 45 cap that accepts up to three separate thermocouple wires used in autoclaves or sterilizers.

Applications

• "Loaded Chamber heat penetration" tests during Performance Qualification (PQ)
• Routine sterilization /autoclave cycles
• Performance tests after autoclave maintenance or repair

• Usable with DURAN^® original GL 45 laboratory bottles (1000 ml or less).
• The 240 mm PTFE tube may be cut to length
• Suitable for holding up to three separate thermocouple wires (Conductor sizes 1/0.3 mm, 1/0.5 mm or 7/0.2 mm)
• Retrace code for product traceability and downloadable certificate

The DURAN^® temperature probe holder GL 45 consists of a stainless steel holder that is permanently fitted into a blue DURAN^® polypropylene GL 45 cap. The holder will accept the 6.0 mm metal temperature measuring probes that are commonly used in laboratory autoclaves and sterilizers.

Applications

• Routine sterilization /autoclave cycles
• "Loaded Chamber heat penetration" tests during Performance Qualification (PQ)
• Performance tests after autoclave maintenance or repair

• Usable with DURAN^® original GL 45 laboratory bottles (1000 ml or less).
• The depth of the probe can be adjusted to suit the bottle size
• Adjustable ferrule suitable for 6.0 mm diameter probes
• Retrace code for product traceability and downloadable certificate
• Easy positioning of the sensor in the middle of the bottle

Built-in printer IT:
Must be installed ex factory, please order with autoclave.
For Models: AES-12, AES-28, AES-50, AES-75, AES-110, AES-150, AE-28-DRY, AE-50-DRY, AE-75-DRY, AE-110-DRY, AE-150-DRY, AHS-50-N, AHS-75-N, AH-21-L, AHS-50-DRY, AHS-75-DRY


Built-in printer IT/TS:
Must be installed ex factory, please order with autoclave.
For Models: AE-50-B, AE-75-B, AE-110-B, AE-150-B, AH-21-B, AHS-50-B, AHS-75-B, AE-20-MP, AE-40-MP, AE-60-MP, AE-80-MP, AE-100-MP


Table top printer ITS:
Print program number, cycle number, temperature, date and hour of the run. Error messages are also printed. With RS 232 interface. Only for AES-12 / AES-28 / AES-50 / AES-75 / AES-110 / AES-150 / DRY

Built-in printer IT/TLV
Must be installed ex factory, please order with autoclave.
For TLV/Series

Vivaspin™ ultrafiltration spin columns for minimal handling and reduced sample loss. Specially designed for rapid, non-denaturing concentration and desalting of proteins and other biological samples. Vertical polyethersulfone (PES) membrane minimizes membrane clogging to ensure high flow rates.

Features & Benefits:

• Dead-stop technology: samples are not concentrated to dryness and allows direct concentrate recovery
• pH compatibility from pH 1 to 9
• Polycarbonate tube design for minimal protein adsorption
• Suitable for sample volumes from 100 µl to 20 ml with a molecular weight cutoff value of Mr 3000 to 100 000

Anabac^® natural is an autoclave deodorant with 100% natural perfume, obtained from natural extracts. The ball dissolves without residue during autoclaving and the perfume is released. Autoclaving processes are not affected.

• Compatible with all autoclaves
• Biodegradable
• ECOCERT certified according to the COSMOS standard

Biological control involves the use of indicators, which check whether all microorganisms were killed during the sterilisation process. The bio-indicators are unique, as they directly indicate how many microbial spores have actually been killed. Thanks to the reliability and quality of the information, the regular use of a bio-indicator can lead to an improvement in the performance of the sterilisation process and thus to better results.

Features:

• No external laboratory is required for performance evaluation
• Easy handling
• Reasonable to use after repairs or maintenance of autoclaves

• Program 3.5 minutes, holding time at 121 °C or 134 °C
• After sterilisation, break the vial in order to bring the nutrient solution into contact with the spore strip
• Results in 48 hours
• Meets EN ISO 11138 standard

White. Suitable for cleaning and autoclaving laboratory articles. Smooth surface prevents scratching of plastic or glassware. With lid. Stackable.

This device is the innovative solution for the simultaneous and continuous detection of up to five gases. A combination of more than 25 sensors allows flexible solutions to individual monitoring tasks. The device can be equipped with three electrochemical, and two catalytic bead, infrared or photoionisation sensors. It is the ideal companion in a great number of applications where reliable monitoring of oxygen, toxic and combustible gases and vapors in ambient air is necessary.

Basic unit with rubber-boot, carrying strap, calibration adapter, water and dust filter. In order to get a fully operational unit, a power pack and up to 5 sensors have to be ordered. And, optionally, a built-in pump or a datalogger can be ordered.

Connecting equipment and fittings with GL threads with hard-walled tubing or tubes made of glass, plastic or metal. Fixing probes, thermometers, dip tubes or cables in reaction vessels. Black screw caps made of PPS, inner parts consisting of a v-ring (PPS), a tapered ring and a sealing ring (both PTFE) as well as an o-ring (FKM) for tubing diameters under 3 mm (not exposed to the medium). Good chemical resistance, the medium is only exposed to PTFE. Temperature resistant from -50 to 250 °C, pressure stable up to 10 bar, suitable for vacuum.

For welding all polyethylene, polypropylene, cellulose or polyamide foils up to a thickness of 2 x 0.25 mm. Expandable with a plug-in table and a film roll-off device. With cutting device and double-sided heating tape clamping device. M model sealers have an additional holding magnet as well as a welding and cooling automatic.

Special high quality processing at the welding points. Mesh width 8 x 8 x 1 mm. Polished stainless steel wire.