Towels and dispensers

Biological control involves the use of indicators, which check whether all microorganisms were killed during the sterilisation process. The bio-indicators are unique, as they directly indicate how many microbial spores have actually been killed. Thanks to the reliability and quality of the information, the regular use of a bio-indicator can lead to an improvement in the performance of the sterilisation process and thus to better results.

Features:

• No external laboratory is required for performance evaluation
• Easy handling
• Reasonable to use after repairs or maintenance of autoclaves

Application:

• Program 3.5 minutes, holding time at 121 °C or 134 °C
• After sterilisation, break the vial in order to bring the nutrient solution into contact with the spore strip
• Results in 48 hours
• Meets EN ISO 11138 standard

Service kit 1: with lid gasket, valve gasket, gasket for exhaust cock and manometer, steam valve
Service kit 2: with lid gasket, control valve gasket, seals for exhaust cock and pressure gauge, steam valve and safety valve
Service kit 3: with door gasket, safety valve and bacteria filter

Its versatility and compact construction make autoclaves especially interesting for small labs or they can be used as an optimal addition to a large autoclave.

All models: Low-maintenance. No water connection required. Compliant with 2014/35/EU Low Voltage Directive, 2014/30/EU EMV Directive, 2011/65/EU Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment.

Vertical models: Class N steam sterilisers. Venting procedure: free steam flow process or fractional flow procedure. A heater is integrated in the bottom of the chamber, but it is not exposed. Therefore, it cannot calcify. The autoclaves are easy to transport and location independent. All you need is a power supply and a mixture of tap water and demineralised water. Safeguarded by a multiple safety system. In aluminum models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and the overpressure safety cavity. In stainless steel models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and a two-bimetal safeguard to prevent overheating of the device.
The fully automated, vertical laboratory autoclave is suitable for extended/ long- term cycles, material tests, HAST Test, pressure vessel test, ICP - TM 650, food preservation, culture media preparation, sterilisation of waste, unpackaged solids without hollow bodies, liquids, bottles, instruments, synthetic materials and rubber. It is operated via of a 7-inch high-resolution tablet. All operating steps are explained with videos directly on the tablet. Compliance with GLP requirements through automatic documentation of users and cycles. Process protocols are stored in the CertoCloud for 10 years. Integration into laboratory data systems possible. For autoclaving liquids, a PT100-media sensor is optionally available.

Scope of suppy: Autoclave, stable instrument panel with 3 feeds, minimum water level indicator, power cable, tablet

Specifications
Chamber diameter:	260 mm
Chamber depth:	350 mm
Air evacuation:	Fractional flow procedure
Chamber material:	Stainless steel 316L
Operating pressure:	2.7 bar
Heating capacity:	1300 W
Power supply:	230 V ±10 % / 50 - 60 Hz

Accessories Accessories for Autoclaves, CertoClav Alternative Tabletop autoclaves CertoClav MultiControl

Accessories Digital vertical autoclaves, AES series

HMT 230/260 FA - for standard tasks:

• Certified according to regulation 93/42/EEC
• Available in 2 sizes with a volume of 16 or 24 liters
• 9 sterilization programs, fully automatic: 121 °C wrapped / unwrapped solid items; with or without drying, 135 °C wrapped / unwrapped solid items; with or without drying, Liquid program: 121 °C, 40 min.
• Controlled by a microprocessor
• Simple digital display
• Water tank
• Electromechanical overheating protection
• Safety valve
• Mechanical pressure-dependent door lock
• Reset/emergency button
• Easy maintenance

HMT 230/260/300 MA - versatile table-top autoclave:

• Certified according to regulation 93/42/EEC
• Available in 3 sizes with a volume of 16, 24 or 40 liters
• Powerful integrated vacuum pump, an essential feature for sterilizing tubes and hollow components
• 7 sterilization programs, fully automatic: 121 °C wrapped / unwrapped (vacuum), 134 °C wrapped / unwrapped (vacuum), Liquid and prion programs, Bowie-Dick test
• Controlled by a microprocessor
• Progress indicator
• Internal water tank
• Electromechanical overheating protection
• Electronic overpressure protection
• Pressure safety valve
• Mechanical pressure-dependent door lock
• Reset/emergency button
• Easy maintenance

HMT 260/300 MB - premium table-top autoclave:

• Certified according to regulation 93/42/EEC
• Available in 2 sizes with a volume of 24 or 40 liters
• Powerful integrated vacuum pump, an essential feature for sterilizing tubes and hollow components
• 5 sterilization programs, fully automatic: Sterilization of wrapped items: 121 °C - 30 min.; 134 °C - 15 min., Sterilization of unwrapped items: 121 °C - 15 min.; 134 °C - 4 min., Individual temperature selection from 105° to 135 °C, Preset prion program
• 3 test programs: leakage test, helix test, Bowie-Dick test
• Controlled by a microprocessor
• Easy operation with a LCD display
• Documentation / data storage via SD card and printer
• Drying program, 1- 60 minutes
• 4 literwater tank, to be filled manually or automatically (purified water)
• Various safety features, e.g. safety valve or pressure-dependent door lock
• With modern design, easy maintenance

Accessories Accessories for benchtop autoclaves HMT FA/-MA and -MB series

Due to the intelligent combination of vacuum, pressure and steam, the autoclaves are suitable for liquids and solids of all kinds. The additional media sensor guarantees a complete sterilisation of liquids such as culture media. Solids of all kinds and hollow materials are optimally sterilised with the help of a vacuum pump. The preheatable chamber, cooling-ventilation and vacuum pump guarantees short cycle times from 20 minutes including drying time.

• 7-inch touchscreen
• Including free CertoCloud software for all protocols and programs
• Remote maintenance, alarm system via PC, tablet or smartphone
• Notification by e-mail and SMS
• 12 customisable programs (45 l version with 8 customisable programs)
• Interfaces: USB, WiFi, Ethernet, Bluetooth, SD-Card
• Integrated documentation (GMP/GLP conform)
• Standard interfaces for bar scanner, protocol and label printer

Scope of suppy: Autoclave, tray set, power cable, touchscreen

Specifications
Temperaturrange:	105 ... 134 °C
Cooling system:	Air venting
Chamber material:	Stainless steel 304L
Operating pressure:	2.3 bar
Heater power:	2400 W
Power supply:	220 V ±10 % / 50 - 60 Hz

Its versatility and compact construction make autoclaves especially interesting for small labs or they can be used as an optimal addition to a large autoclave.

All models: Low-maintenance. No water connection required. Compliant with 2014/35/EU Low Voltage Directive, 2014/30/EU EMV Directive, 2011/65/EU Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment.

Vertical models: Class N steam sterilisers. Venting procedure: free steam flow process or fractional flow procedure. A heater is integrated in the bottom of the chamber, but it is not exposed. Therefore, it cannot calcify. The autoclaves are easy to transport and location independent. All you need is a power supply and a mixture of tap water and demineralised water. Safeguarded by a multiple safety system. In aluminum models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and the overpressure safety cavity. In stainless steel models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and a two-bimetal safeguard to prevent overheating of the device.
The vertical laboratory autoclave with valve control is suitable for sterilisation of unpackaged solids without hollow bodies, liquids, bottles, instruments, synthetic materials, food preservation, culture media preparation and waste. A precision manometer with drag pointer and a precision thermometer ensure that operations and processes are precise. This autoclave is available in two versions, each with two temperature levels. Pressure control via valve, temperature control via thermostat. Pressure valves are not interchangeable, because the thermostat of the device is perfectly adapted and calibrated to the valve.

Scope of supply: Autoclave, stable instrument panel with 3 feeds, minimum water level indicator, power cable

Specifications	EL 12 // EL 18
Chamber diameter:	240 mm
Chamber depth:	260 // 390 mm
Air evacuation:	Free steam flow process
Chamber material:	Aluminium
Operating pressure:	2.7 bar
Heating capacity:	1900 W
Power supply:	230 V ±10 % / 50 - 60 Hz

Accessories Accessories for Autoclaves, CertoClav Alternative Tabletop autoclaves CertoClav MultiControl

Small, robust and cost effective with its stainless steel casing. The Minichiller is the smallest Unichiller in the world. Minichillers are available with air or water-cooled refrigeration systems, illuminated level indicator, overflow and drain on the front. The filling port is on the top of the unit. All models use natural refrigerants as standard. Minichillers have suction and pressure pumps and therefore have the advantage of have a high flow at low pressure. This is particularly interesting for all pressure sensitive applications (e.g. glass condensors).

Supply req.:

230 V 50/60 Hz

This autoclave is microprocessor controlled and monitored with 10 sterilisation programmes of which 4 are fixed and 6 are freely selectable and has bacteriological filters included by default.

• Operating temperature range 100 °C to 134 °C
• On request, also available with B Class
• RS 232 interface
• Fully automatic functions
• With water reservoir, pre-vacuum and drying
• Case and lid shrouding are AISI 304 stainless steel
• Sterilisation chamber, lid and sealing system are AISI 316 stainless steel
• Electrical heating with protected heating elements
• Safety pressure valve
• Safety thermostat
• Automatic steam controlled by Touch Screen microprocessor
• Manual valves for emptying the sterilisation chamber and for draining steam
• Equipped with mesh stand on the chamber base and trays
• Supply requirements: 230 V 16 A single phase

These autoclaves are microprocessor controlled and monitored with 10 sterilisation programmes of which 4 are fixed and 6 are freely programmable.

• Operating temperature range 100 °C to 134 °C
• On request also available with with vacuum pump and steam generator
• Agar modus (40 °C to 80 °C)
• RS 232 interface
• Timer
• Programmable auto-start (24 h)
• Fully automatic functions
• Case and lid shrouding are AISI 304 stainless steel
• Sterilisation chamber, lid and sealing system are AISI 316 stainless steel
• Electrical heating with protected heating elements in the interior of the chamber
• Safety pressure valve
• Safety thermostat
• Automatic steam controlled by microprocessor
• Manual valves for emptying the sterilisation chamber and for draining steam
• Supply requirements:

AES-12 and AES-75: 230 V 16 A single phase
AES-110 and AES-150: 400 V + Neutral (3-phase)

Accessories Accessory baskets for Digital vertical autoclaves, AES series

Compact infrared thermometer for measuring surface temperature and wall temperature as well as fuse and component temperature of air-conditioning systems. Quick and easy transmission of measurement data to smartphones or tablets via Bluetooth^®. With the free testo Smart App, measurement data can be read, displayed graphically or in tabular form and results can be sent as a PDF or Excel file. In addition, images including temperature value and laser marking can also be created with the app.

• Measurement spot marking with 8-point laser circle
• Emissivity adjustable
• System requirements: Requires iOS 11.0 or newer; Android 6.0 or newer; Bluetooth^® 4.0

Scope of supply: Infrared thermometer, batteries, calibration protocol

Temperature range:	-30 ... 250 °C
Accuracy:	±1.5 °C or ±1.5 % of mv (0 ... 250 °C) ±2.0 °C (-20 ... -0.1 °C) ±2.5 °C (-30 ... -20.1 °C)
Resolution:	0.1 °C
Laser marking:	Diffractive optics (laser circle)
Emissivity factor:	0.1 ... 1.0
Optics:	10:1
Dimensions (L x W x H):	140 x 36 x 25 mm
Weight:	97 g
Power supply:	3 x AAA

Its versatility and compact construction make autoclaves especially interesting for small labs or they can be used as an optimal addition to a large autoclave.

All models: Low-maintenance. No water connection required. Compliant with 2014/35/EU Low Voltage Directive, 2014/30/EU EMV Directive, 2011/65/EU Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment.

Vertical models: Class N steam sterilisers. Venting procedure: free steam flow process or fractional flow procedure. A heater is integrated in the bottom of the chamber, but it is not exposed. Therefore, it cannot calcify. The autoclaves are easy to transport and location independent. All you need is a power supply and a mixture of tap water and demineralised water. Safeguarded by a multiple safety system. In aluminum models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and the overpressure safety cavity. In stainless steel models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and a two-bimetal safeguard to prevent overheating of the device.
The PT100 sensor-controlled, vertical laboratory autoclave is suitable for extended/ long- term cycles, material tests, HAST test, pressure vessel test und ICP - TM 650, food preservation, culture media preparation, sterilisation of waste, unpackaged solids without hollow bodies, liquids, bottles, instruments, synthetic materials and rubber. Basic version of PC software for data monitoring is included. With this software, you can only set single-step programs. For multi-step programs, PC software professional version is required.

The CertoClav MultiControl 2 Touch is additionally equipped with a 7-inch robust high-resolution tablet. The operating steps are explained with videos on the screen.

• Programmable from 1 minute to 30 days and from room temperature to 140 °C
• Automated process control and error detection
• USB port
• Printer port (RS232) for printing sterilisation protocols

Scope of suppy:
MultiControl 2: Autoclave, stable instrument panel with 3 feeds and minimum water level indicator, power cable, MC2 controller
MultiControl 2 touch: Autoclave, stable instrument panel with 3 feeds and minimum water level indicator, power cable, MC2 controller, tablet

Specifications
Chamber diameter:	260 mm
Chamber depth:	350 mm
Air evacuation:	Fractional flow procedure
Chamber material:	Stainless steel 316L
Operating pressure:	2.7 bar
Heating capacity:	1300 W
Power supply:	230 V ±10 % / 50 - 60 Hz

Accessories Accessories for Autoclaves, CertoClav Alternative Tabletop autoclaves CertoClav MultiControl

The features of the laboratory autoclave line are specifically designed for most common laboratory applications and can be used for the sterilzation of liquids, instruments, glass, waste and for the preparation of nutrient media.

• EL = horizontal loading
• ELV = vertical loading
• EL-CGD and ELV-CGD = with integrated steam generator and rapid cooling
• Stores the last 200 cycles in built-in memory
• Option: second flexible Pt 100 probe
• 30 Identification Codes and Passwords for access level control
• The controller and software comply with the 21 CFR part 11 standard
• Filter replacement notifications based on the number of cycles
• Data archiving via USB interface
• Double sterilization time monitoring
• In/Out test (enables technicians to check each system component separately)
• Sterilization temperature range up 105 °C to 137 °C
• Optional Disinfection/Isothermal Temperature range from 60°C to 105°C
• 7 standard sterilisation programs

Options available

• Fast cooling technology and ventilator to reduce cooling time additionally
• Vacuum pump to evacuate residual air
• Exhaust air filtration
• Lifting device to elevate/to lower heavy sterilzation goods
• Printer to document the performed cycle (Please order separately)
• R.PC.R software allows complete control and monitoring of the autoclave

Accessories

The compact and space saving table top units of the Laboklav 25 series provides you most applications of bigger table top units:

• sterilisation of liquids in open and lightly closed vessels, also with air re-cooling system
• sterilisation of instruments, also with pre-vacuum and drying vacuum
• waste sterilisation at 134 °C
• optional exhaust air filtration system
• volume of chamber: 25 l
• max. permissible pressure: 2.8 bar
• sterilising temperature: 98 to 138 °C

A unique design meets innovative technical solutions:

• optimal use of chamber volume - sufficient for 5 x 1 l standard bottle incl. cap
• lid made of temperature resistant safety glass and lid cover made of safety glass
• LED front lightning to visualise cycle progress
• motor driven and self-checking closing mechanism
• flexible temperature reference sensor PT100 as serial function
• Thermolocking device according to IEC 61010-2-40

Chamber volume/Chamber size	25L useable , Ø 265mm x 465mm Chamber illumination by white LED light
Load:	e.g. 5 x 1L bottle up to 5kg instruments
Dimensions (W x D x H): Space requirement on the table: Weight:	440mm x 540mm x 660mm 440mm x 550mm + 110 for door overhang approx. 65kg
Max permissible pressure (PS): Max. permissible temperature (TS):	2.8 bar 138°C
Chamber material:	Stainless steel, chamber lid made from temperature proof safety glass
Housing:	Powder coated, red; Front cover from transparent safety glass; Process illumination (LED) in Blue, Red and Green
Steam generation:	Integrated steam generator with dry heating elements
Heating power: Electrical connection:	2kW 230V ~ 50 Hz, 16A
Lid closing system:	Motorized closing system
Sterilisation temperature: Feed water supply:	98 to 135 °C, adjustable Integrated feed water tank with manual filling
Exhaust steam condensing:	Included, discharge into integrated condensate tank
Thermo locking acc. to IEC 61010-2-43 (TRB 402):	Integrated with flexible reference temperature sensor opening, temperature adjustable
Control:	Micro processor with LCD Display; Code protected access to programming levels; Serial interface RS 485; Internal storage chip to store cycle data of approx. 150 cycles, visualisation and print out at a later stage is possible
Programms:	Up to 10 programms, depending on the integrated option, all programmes can be individualized
Norms and regulations:	Manufactured in Germany in full compliance with the relevant norms and regulations. Serial approval by German TUV, CE marking according Pressure Device Directive (Commissioned by factory service at an additional cost)

Accessories Accessories for Steam steriliser Laboklav 25

• Certified according to the Pressure Equipment Directive 2014/68/EU
• Available in 2 sizes with 50 and 80 liters of effective usable volume
• Innovative locking system with motorized lid including pressure and temperature monitoring
• Steam generation in the chamber
• High energy efficiency and long service life
• Rapid cooling for short cooling times
• Also available with flexible temperature sensor for the sterilization of liquids
• Timer function and 4 program groups with 3 sub-groups each, including night and dissolution program, adjustments for customized programs are always possible
• No water/waste-water installation required
• Castors for mobile use
• Easy to clean plastic surface with rounded edges in contact areas (no burns or injuries).
• Electrical, mechanical and constructional factors guarantee the highest level of quality and user protection
• The accessories make it possible to configurate the autoclave according to your wishes
• Exhaust air filters for laboratories of safety level S2 and higher are also available

Specifications
Automatic start:	1 minute to 7 days, Night programme
Time of sterilization:	1 to 300mins.
Power supply:	220-240V a.c.
Sealing:	at the push of a button, fully automatic
Boiler material:	SUS304 (rust resistant, stainless steel)

Accessories Accessories for HG series steam sterilisers

Tireless, durable and ingeniously simple

• Certified according to the Pressure Equipment Directive 2014/68/EU
• Available in 4 sizes with 25, 50, 85 and 110 liters of effective usable volume
• Simple, reliable and with a long service life, your perfect choice for standard tasks
• Optionally available with flexible temperature sensor for the sterilization of liquids
• For all devices up to 110 liters only a single-phase power supply (220/240 V; 50/60 Hz) is required
• Timer function and 3 program groups with a max. of 6 programs including dissolution program, adaptions for customized programs are always possible
• No installation to a feed water supply required
• Castors for mobile use
• Easy to clean plastic surface with rounded edges in contact areas (no burns or injuries)
• Electrical, mechanical and constructional factors guarantee the highest level of quality and user protection
• The accessories make it possible to configurate the autoclave according to your wishes
• Exhaust air filters for laboratories of safety level S2 and higher are optionally available

Accessories Accessories for HV series steam sterilisers

Laboklav 80 series provides an extensive and diversified range of equipment variants - customized for you laboratory application. The focus is on safe and reproducible processes, safety for the user and the environment as well as a comfortable operation of the autoclave. All steam steriliser are:

• suitable for the liquid sterilisation in open and lightly closed vessels, solid sterilisation and waste sterilisation at 134°C
• upgradable for high demanding laboratory applications
• volume of chamber: 80l
• max. permissible pressure: 2.8bar
• sterilising temperature: 98°C to 138°C
• motor driven and self-checking closing mechanism
• flexible temperature reference sensor PT100 as serial function
• Thermolocking device according to IEC 61010-2-40

A unique installation concept for varied installation possibilities:

• The autoclave can be installed as vertical or as horizontal unit - without additional costs!
• The lid can optionally be opened to the right, to the left or backwards.
• All units can be delivered in three colours: red, green or blue.

Numerous equipment variants:

• vacuum system for difficult to de-aerate solids incl. fractionated pre-vacuum and drying vacuum
• fast re-cooling system for liquid sterilisation using a double jacket, without rejection of demineralised water
• upgrade of the re-cooling system with counter pressure and fan possible - for further reduction of batch times
• optional exhaust air filtration system

Its versatility and compact construction make autoclaves especially interesting for small labs or they can be used as an optimal addition to a large autoclave.

All models: Low-maintenance. No water connection required. Compliant with 2014/35/EU Low Voltage Directive, 2014/30/EU EMV Directive, 2011/65/EU Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment.

Vertical models: Class N steam sterilisers. Venting procedure: free steam flow process or fractional flow procedure. A heater is integrated in the bottom of the chamber, but it is not exposed. Therefore, it cannot calcify. The autoclaves are easy to transport and location independent. All you need is a power supply and a mixture of tap water and demineralised water. Safeguarded by a multiple safety system. In aluminum models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and the overpressure safety cavity. In stainless steel models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and a two-bimetal safeguard to prevent overheating of the device.
CertoClav Classic is the result of further development of the EL, but made of corrosion-resistant, electropolished stainless steel. Suitable for sterilisation of unpackaged solids without hollow bodies, liquids, bottles, instruments, synthetic materials, food preservation, culture media preparation and waste. A timer is integrated.

Scope of suppy: Autoclav, stable instrument panel with 3 feeds, minimum water level indicator, power cable

Specifications
Chamber diameter:	260 mm
Chamber depth:	350 mm
Air evacuation:	Free steam flow process
Chamber material:	Stainless steel
Operating pressure:	2.7 bar
Heating capacity:	1300 W
Power supply:	230 V ±10 % / 50 - 60 Hz

Accessories Accessories for Autoclaves, CertoClav Alternative Tabletop autoclaves CertoClav MultiControl

Its versatility and compact construction make autoclaves especially interesting for small labs or they can be used as an optimal addition to a large autoclave.

All models: Low-maintenance. No water connection required. Compliant with 2014/35/EU Low Voltage Directive, 2014/30/EU EMV Directive, 2011/65/EU Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment.

Vertical models: Class N steam sterilisers. Venting procedure: free steam flow process or fractional flow procedure. A heater is integrated in the bottom of the chamber, but it is not exposed. Therefore, it cannot calcify. The autoclaves are easy to transport and location independent. All you need is a power supply and a mixture of tap water and demineralised water. Safeguarded by a multiple safety system. In aluminum models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and the overpressure safety cavity. In stainless steel models, it consists of an overpressure valve, a pressure valve, a safety lock inside the lid to prevent opening under pressure and a two-bimetal safeguard to prevent overheating of the device.
The PT100 sensor-controlled, vertical laboratory autoclave is suitable for extended/ long- term cycles, material tests, HAST test, pressure vessel test und ICP - TM 650, food preservation, culture media preparation, sterilisation of waste, unpackaged solids without hollow bodies, liquids, bottles, instruments, synthetic materials and rubber. Basic version of PC software for data monitoring is included. With this software, you can only set single-step programs. For multi-step programs, PC software professional version is required.

• Programmable from 1 minute to 30 days and from room temperature to 140 °C
• Automated process control and error detection
• USB port
• Printer port (RS232) for printing sterilisation protocols

Scope of suppy: Autoclave, stable instrument panel with 3 feeds and minimum water level indicator, power cable, MC2 controller

Specifications
Chamber diameter:	240 mm
Chamber depth:	260 mm
Air evacuation:	Fractional flow procedure
Chamber material:	Aluminium
Operating pressure:	2,7 bar
Heating capacity:	1900 W
Power supply:	230 V ±10 % / 50 - 60 Hz

Accessories Accessories for Autoclaves, CertoClav Alternative Tabletop autoclaves CertoClav EL

Accessories Benchtop-Autoclaves HMT FA/-MA and -MB series

Safer than disinfection, hot-air sterilisation of containers and instruments.
The safety feature for this hot air steriliser: Setpoint Wait. This means that the programme for sterilisation only starts when the set temperature has been reached. This feature can also be used with freely positionable Pt100 temperature sensors. Here the sterilisation time only begins when the set temperature has been reached at all measurement points, and reliable sterilisation is guaranteed at all times.

Textured stainless steel housing, rear of zinc-plated steel, intuitively operated TwinDISPLAY(TFT colour display) with touchscreen
You can find a detailed description of the "TwinDISPLAY" model at www.memmert.com

• Available parameters on the ControlCOCKPIT: Temperature (Celsius or Fahrenheit), programme time, relative humidity, time zones, summertime/wintertime
• Two Pt100 sensors DIN class A in a 4-wire circuit for mutual monitoring, taking over functions in case of an error
• AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port
• ControlCOCKPIT with USB port for uploading programmes, reading out protocol logs, activating the User-ID function
• Displaying of already logged protocol data on the ControlCOCKPIT (max 10,000 values correspond to approx. 1 week)
• Ethernet interface on the rear of the appliance for reading out the protocol log and for uploading programmes and for online logging
• Multiple overtemperature protection: Electronic temperature monitoring TWW/TWB and mechanical temperature limiter TB acc. to DIN 12880, AutoSAFETY automatically adjusts to the set value within a freely adjustable tolerance range. Setting individual MIN / MAX values for over/undertemperature alarm