Forceps

The two-part, non-sterile LABSOLUTE® disposable syringes, with Luer lock connection complying with DIN EN 1707 or Luer slip connection complying with DIN EN 20594-1, are fully manufactured from robust, chemical resistant PP. They are free of latex, plasticizers and PVC. There are no rubber plunger seals or silicone lubricants that can cause contamination of the samples. The syringes are also impressive due to the safe functional back-stop feature and an easy-to-read permanent graduation.

Accessories  Alternative Disposable syringes, Luer lock, non-sterile, PP

The two-part, non-sterile LABSOLUTE® disposable syringes, with Luer lock connection complying with DIN EN 1707 or Luer slip connection complying with DIN EN 20594-1, are fully manufactured from robust, chemical resistant PP. They are free of latex, plasticizers and PVC. There are no rubber plunger seals or silicone lubricants that can cause contamination of the samples. The syringes are also impressive due to the safe functional back-stop feature and an easy-to-read permanent graduation.

Accessories Syringe filters 13 mm Accessories Syringe filters, ProFill, 17 mm Accessories Syringe filters 25 mm Accessories Syringe filters, ProFill, 30 mm Alternative Disposable syringes, Luer slip, non-sterile, PP

• Barrel: PP, Plunger: PP and Polyisoprene rubber
• Smooth flow, tight, high transparency barrel
• Latex-free, pyrogen-free, DEHP-free, non-toxic
• Defined safety stop to avoid accidental pull-out of plunger
• Suitable for all syringe filters with Luer connection
• Non-sterile, bulk packed in box of 500
• Luer-Lock according to DIN EN 1707
• Luer-Slip according to DIN EN 20594-1

Disposable syringes HSW NORM-JECT^®withPP barrel, and PE piston. Luer or Luer-Lock nozzle

• Smooth flow, tight, high transparency barrel
• No rubber, styrene or DEHP, latex- and silicone-oil-free
• Sterile, individually blister strip packed
• Defined position of the plunger at volume "0" to feel when plunger is completely inserted
• According to ISO 7886-1
• Defined safety stop to avoid accidental pull-out of plunger

Accessories Disposable Needles HSW FINE-JECT®, PP/stainless steel, sterile Alternative Syringes, FORTUNA OPTIMA®, Glass Alternative Disposable Syringes Injekt® Solo, 2-piece

• In accordance with ISO 7864 and DIN 13097
• Thin-walled needles
• Made of stainless, chromium-nickel steel
• Smooth surface with light silicone coating
• Minimal pain upon puncture
• Transparent Luer-Lock plastic hub
• Made of Polypropylene (needle hub)
• Box of 100 pieces

• Thin-walled needles, made of stainless, chromium-nickel steel, with smooth surface with light silicone coating
• Minimal pain upon puncture
• Transparent Luer-Lock plastic hub, made of Polypropylene (needle hub), color-coded hub conforms to ISO 6009

• Material: Polypropylene, Plunger backstop: Polyisoprene
• Plunger backstop with smooth double sealing ring for slow aspiration and injection of small sample quantities
• Highly transparent barrel with black graduations (in ml) for ideal readability, permanent marking
• Safe plunger backstop for easy aspiration to the maximum volume
• Inside siliconized
• Luer Slip to put on the needle, centric or eccentric or Luer Lock conus, centric
• Latex- and PVC-free
• Sterile, single packed
• Manufactured according to EN ISO 7886-1

Alternative Fine Dosage Syringes Omnifix®-F, 3-piece

Disposable syringes withPP barrel, and PE piston. Luer-Slip or Luer-Lock nozzle.

• Wipe-resistant scale
• Transparent cylinder
• Pyrogen-free, non-toxic and PVC-free

Individually wrapped sterile, or loose-packed non-sterile.

Bioproof: Sterilized syringes are DNase-, RNase- and pyrogen-free certified.

In numerous situations, rapid and contamination-free samples have to be taken. DispoSamplers are perfect for this application. They are cleanroom manufactured, individually packed and always ready to use. Avoid expensive decontamination or cleaning of soiled samplers. Gamma sterilised versions are also available.

MultiDispo: For free-flowing powders and small-grain granulates. Easy emptying through opening in the handle.
ZoneDispo: For free-flowing powders and small-grain granulates. Collected sample can be transported in closed sampler.
TargetDispo: For taking target-point samples from powders and granulates.
PowderDispo: For taking cross-section samples of powdery or slightly cohesive substances.
DispoPicker: For taking cross-section samples from powders and small-grain granulates. With closed tip.
DispoLance: For direct removal and filling of free-flowing powders and small-grain granulates.
MicroDispo: For free-flowing powders and small-grain bulk materials. For small sample quantities (10 ml).

Alternative Disposable liquid samplers, HDPE

• Luer Lock fitting male and female
• Sterile closing of all kinds of open IV-accesses in IV-Sets
• Sterile closing of pre-filled syringes

• Made of polypropylene/polyethylene
• Green plunger, highly transparent barrel,
• High contrast black graduation, permanent marking, ideal readability
• Displacement spike: Reduces residual volume and minimizes unnecessary loss of medicine
• Safe plunger backstop, easy aspiration up to maximum volume
• Silicone oil-free
• Centric Luer cone
• Latex-free/PVC-free
• Single sterile-packed

Type Solo without needle, Luer cone according to EN ISO 7886-1.
Type Duo with bi-packed needle, Luer cone according to EN ISO 7886-1, EN ISO 7864 and DIN 13097.

Alternative Disposable Syringes Omnifix® Solo, 3-piece

• Thin-walled needles
• Made of stainless, chromium-nickel steel
• Smooth surface with light silicone coating
• Transparent Luer-Lock plastic hub made of Polypropylene
• Colour-coded hub conforms to ISO 6009

Specifications
Readability:	1 mg, 0.01%
Weighing range, max:	150g
Reproducibility, weight of sample 1g: Reproducibility, weight of sample 5g:	±0.2% ±0.05%
Power consumption:	700VA
Dimensions (W x D x H):	213 x 320 x 181mm

• Thin-walled needles
• Made of stainless, chromium-nickel steel
• Smooth surface with light silicone coating
• Transparent Luer-Lock plastic hub
• Made of Polypropylene (needle hub)
• Color-coded hub conforms to ISO 6009
• Box of 100 pieces

• Graduation in ml for volume dosing, scale is extended over the nominal volume
• Material: Barrel: Polypropylene, Plunger: Polyethylene
• Highly transparent barrel with green plunger and black graduations for ideal readability, permanent marking
• Safe plunger backstop for easy pulling up to the maximum volume
• Silicone oil-free
• Luer Slip to put on the needle, centric or eccentric or Luer Lock conus, centric
• Latex- and PVC-free
• Sterile, single packed or non-sterile bulk packing
• Manufactured according to EN ISO 7886-1

Sterile disposable needles for use with Injekt^® and Omnifix^® insulin syringes

• Cannula tube made of stainless chromium-nickel steel
• With extremely smooth surface and finely-dosed silicone coating
• Transparent PP Luer-Lock plastic approach
• Latex-free, PVC-free, DEHP-free
• Pack of 100 pieces

• Made of polypropylene/polystyrol, highly transparent barrel
• Permanent marking, ideal readability
• Safe plunger backstop
• Easy aspiration up to maximum volume
• Plunger stopper with double sealing ring for slow aspiration and injection: made of natural latex free synthetic material
• Minimal residual volume
• Latex-free/PVC-free
• Single sterile-packed

Type Solo without needle, Luer cone according to EN ISO 7886-1.
Type Duo with bi-packed needle, Luer cone according to EN ISO 7886-1, EN ISO 7864 and DIN 13097.

Alternative Disposable Syringes Omnifix® Solo, 3-piece

For 25 to 500 µl Syringes.

Body and piston made from polypropylene, non sterile.

• Highly transparent barrel
• High contrast blue graduation
• Variants with and without Luer adapter and aspiration handle
• Piston with double sealing ring for slow aspiration and injection
• With a central catheter hub
• Polypropylene syringe barrel and syringe plunger
• Smooth-running piston plug made of synthetic rubber with double sealing ring
• Latex-free
• Sterile, single packed

Alternative Disposable Syringes Omnifix® Solo, 3-piece

• White polyethylene plug style needle closures, unattached
• Manufactured from expansion borosilicate N51A glass conforming to USP Type I and ASTM E438, Type I, Class B requirements

Alternative LLG-Shell Vials with PE cap (fire-polished neck) ND8, ND12, ND15

• Scale Graduation
• Large, easy to read scale for an exact dosage
• Thin-walled needle (according to EN ISO 9626:2001) with extremely fine three facets grinding and a special silicone coating
• Protective caps at the ends of the syringe guarantee its sterility
• The crystal clear barrel of the syringe makes sure that air bubbles are easily identified
• Piston with double sealing ring
• Integral piston stop
• Round shaped cylinder with black scale
• Materials: PP, PS, IR, PE, stainless steel, silicone oil
• Latex free, PVC- free, DEHP-free

Sterilised, individually packaged, transparent. A Luer adapter is supplied for the 100 ml syringe.