Magnetic stirrers with heating, with induction

Class A. Stainless steel sheathed probe, approx. 105 x 3mm L x dia.
With handle and approx. 1m cable.

Flexible, TC adapter type K.

Suitable for measurements in corrosive media. Ideal for use in laboratory and industry. Precise Pt100 sensor with replaceable glass coating and fixed cable.

Temperature probe with integral Lemo-connector. Particularly useful for measuring temperature in aggressive media (temperature range: -200 °C to +250 °C). The temperature element is located in a stainless steel core which is entirely sealed in a solid and seamless PTFE coating. This provides high chemical resistance and rigidity, however, the probe can be bent manually to the
desired shape. The tip of the probe is narrower (6mm dia.) for faster measurement response.
Connector: 1 x Lemo, size 1, connector with 4 cores. The connector is situated directly at the end of the probe so that it can be used for further applications without removing any cables.

Ideal for measuring temperature in agressive media. The probe is housed in a stainless steel tube and therefore still has the necessary flexiblity. It can be gently manoeuvred into the right direction. The additional PTFE-coating gives the important chemical resistance. For a direct and quick measurement the PTFE-coating is reduced at the measuring tip (5.5 mm diameter). The connector is a size 1 Lemo-type, with 4-lead cable. The cable has a total length of 1500 mm and is also well coated with PTFE. Temperature resistance maximum +300°C and minimum -70°C, without charge.

Digital probes with intelligent calibration concept. Integrated, extendable telescope enables convenient measurement.

Digital probes with intelligent calibration concept. All probe heads can be easily attached to the universal handle.

Digital immersion/penetration probe with long-term stable Pt100 temperature sensor for measurements in liquid and pasty media. Ideal for use in the laboratory, in industry, and food control.

• Measured values can be stored by pressing the button on the meter
• Intelligent calibration concept with zero-error display

Conformity-rated temperature probes are approved for official temperature measurements.

The magnetic probe adheres to metallic surfaces and enables the measurement of the surface temperature. With thermocouple plug type K.

Accessories for EBI 25 temperature and humidity data loggers.

Temperature probes with TC plug type T.

Temperature probes with TC plug type K.

The self-adhesive testoterm measuring points can be affixed to the measurement object for temperature monitoring purposes and respond to temperature increases within 2 to 3 seconds by changing colour. Storage in refrigerator is recommended. The maximum transportation temperature is 25 °C and may not be exceeded.