Temperature data logger

Applications:

• Transport
• Storage monitoring
• Refrigeration areas and cold rooms

Features:

• Waterproof
• Visual alarm
• Max / min values on display
• Stores 40000 readings, can be read off at any time
• Replaceable battery

Scope of supply:
EBI 20-T1: Temperature Logger
EBI 20-T1-Set: Temperature Logger, evaluation software, Interface
EBI 20-TE1: Temperature Logger with external probe
EBI 20-TE1-Set: Temperature Logger with external sensor, evaluation software, Interface

Specifications
Measuring range temperature:	-30 to +70 °C
Accuracy temperature:	±0.5 °C (-20 to +40 °C); ±0.8 °C for remaining measuring range
Resolution temperature:	0.1 °C
Memory:	40000 samples
Sensor:	NTC
Operating temperature: Storage temperature:	-30 to +70 °C -40 to +70 °C
Measuring period:	1 minute to 24 hours
Measuring mode:	immediate loop measurement, measurement from starting point, start immediately until memory full, start/stop measuring, start when button pressed
Power supply:	3 V lithium (CR 2450), can be replaced by user
IP code:	IP 67
Housing :	ABS
Dimensions (L x W x H):	69 x 48 x 22 mm
Weight:	approx. 45 g

The single-use data logger TempMate-S1 with its built-in USB connector, is the ideal solution for low-cost temperature monitoring of transports. TempMate-PDF loggers directly useable with pre-programmed configuration or reprogrammable with Tempbase Software according to each customer's specifications. To download the recorded data, simply connect TempMate-S1 directly to the USB port. A PDF and CSV report will automatically be generated, covering temperature graph, detailed data list and statistical information. No hardware (cable, interface) or software is required.

• Auto generating PDF and CSV format data report
• 110 days run time 16000 measurements, 10 minuteinterval
• Reprogrammable with Tempbase Software free of charge
• Up to 5 alarm points configurable
• Integrated USB connector
• LED Alarm indicators
• Serial number sticker
• Inclusive certificate
• Food proof according to HACCP

Specifications
Temperature range:	-30 ... 70 °C
Accuracy:	±0.5 °C at -20 ... +40 °C / ±1.0 °C in remaining range
Resolution:	0.1 °C
Data memory:	16000 measurements
Recording cycle:	110 days
Sampling interval:	10 min
Shelf life:	24 months
Dimensions (L x W x H):	80 x 47 x 7 mm
Weight:	14.6 g
IP code:	IP 67 / NEMA 6
Certifications:	Calibration Certificate, EN 12830 S, T, C, D, 1

PDF data logger with different temperature sensors.

• For temperature monitoring related to HACCP / IFS issues or other perishable goods
• Transportation of fresh, cool and deep cool products
• Monitoring of fridges and deep freezers
• Evaluation without software, PDF are automatically generated
• Minimise training, user errors and IT costs using EBI 300's simple, easy to use design and standard software
• Ensure data integrity since no data manipulation is possible
• EN 12830, ATP, VO(EG) 37/2005 Compliant
• Factory calibration certificate included
• Programmable via the free online configurator at www.ebi300.com
• No separate interface for programming and reading

EBI 300: PDF data logger with internal temperature sensor
EBI 300 TE: PDF data logger with external temperature sensor, internal temperature sensor can be used additionally
EBI 300 TH: PDF data logger with external humidity and temperature sensor, internal temperature sensor can also be used

Specifications
Ambient Temperature: Measuring range Temp. EBI 300 / 300 TH: Measuring range Temp. EBI 300 TE:	-30 to +70 °C -30 to +70 °C -35 to +70 °C
Measuring range Humidity EBI 300 TH:	0 to 100 % rF
Accuracy Temperature:	±0.5 °C (-20 to +40 °C), ±0.8 °C for remaining range
Accuracy Humidity:	± 3 % (10 to 90 % rh), ± 5 % for remaining range
Resolution Temperature / Humidity: Memory: Sensor:	0.1°C / 0.1 % rh 40,000 samples NTC for temperature
Battery life time:	up to two years
Measuring period:	1 minute to 24 hours
Maximum Start Delay:	72 h
Housing material:	Polycarbonate
Measuring modes:	Start/Stop, endless loop, start with button
Alarms:	2 values, high and low limits
Weight:	35 g
IP code:	IP 65

Data logger with integrated USB interface for temperature recording. Ideal for monitoring storage and transport conditions in accordance with HACCP (EN 12830).

• Incl. calibration certificate
• Memory for 60 000 readings
• Usable without software (pre-programmed 15-minute reading interval)
• Freely adjustable memory interval from 30 seconds to 24 hours (via free Log Connect software)
• Automatic output as PDF file (logger is recognized like USB memory stick)
• Battery lifetime > 3 years (with recording interval >15 minutes)
• Status and alarm LEDs with acoustic signal (buzzer)
• Wall mount included
• EN12830 compliant
• IP65 waterproof

Specifications
Measuring range:	-40 ... +70°C
Accuracy:	±0.5°C (-10 ... +40°C), otherwise ±1.0°C
Resolution:	0.1°C
Memory:	60 000 measurements
Interface:	USB (integr.)
Housing:	ABS
Dimensions (L x W x H):	100 x 19 x 19mm
Weight:	70g
Battery:	1 x 3.6 Volt Lithium ½ AA

Alternative Data logger LOG32THP

Wireless temperature data loggers for storage rooms and refrigerated cabinets.

• Readout via wireless interface
• Replaceable battery
• High protection class IP67
• LCD display
• Memory for 288 values

EBI 25-T: With internal NTC temperature sensor
EBI 25-TE: With external NTC temperature sensor

The IF 400 base station and the Winlog.web / Winlog.wave PC software (see "Accessories for EBI 25 data loggers) are required for programming and evaluating the EBI 25-T/TE data loggers.

Scope of supply: Temperature data logger, operating manual

Specifications
Sensor: Channels: Measuring cycle:	NTC 1 1 min. ... 24 Hrs. user definable
Measuring range EBI 25-T: Measuring range EBI 25-TE:	-30 ... 60 °C -40 ... 85 °C
Accuracy EBI 25-T (±1 digit):	±0.5 °C (-20 ... 40 °C) ±0.8 °C (40.1 ... 60 °C)
Accuracy EBI 25-TE (±1 digit):	±0.5 °C (-20 °C ... 40 °C) ±0.8 °C (-30 °C ... -20 °C; 40 °C ... 60 °C) ±1.5 °C (-40 °C ... -30 °C; 60 °C ... 85 °C)
Resolution:	0.1 °C
IP code:	IP 67
Battery life:	approx. 2 years
Operation and storage temperature:	-30 ... 60 °C / -40 ... 85 °C
Dimensions (W x D x H):	48 x 27 x 95 mm
Power supply:	1 x Lithium battery 3.6 V, replaceable

Accessories Accessories for EBI 25 data loggers Alternative Wireless temperature data logger EBI 25-TX

The mini data logger for temperature, testo 174T, is ideal for accompanying transports. Simply positioned close to the goods, e. g. in containers and refrigerated rooms, the data logger monitors temperature continuously, securely and unobtrusively. The software ComSoft Basic is available as a free download and allows fast programming of the data logger as well as easy data analysis.

• High data integrity, even with empty battery
• Large measurement data memory
• Watertight in accordance with IP65
• Compact and robust
• Conforms to EN12830
• Issue of alarms via display
• Data transfer to the PC via USB interface
• Reliable temperature measurement for the monitoring of sensitive goods and cold chain during storage and transport

Scope of supply:
testo 174T: Mini data logger, 1-channel, incl. wall bracket, batteries (2 x CR 2032 lithium), calibration protocol
testo 174T-Set: Mini data logger, 1-channel, incl. USB interface for programming and reading out the logger, wall bracket, batteries (2 x CR 2032 lithium), calibration protocol
testo 174T Starter kit: 3 x mini data loggers, USB interface, wall bracket, batteries (6 x CR2032 lithium), calibration protocol

Probe type:	Internal NTC temperature sensor
Measuring range:	-30 to +70 °C
Accuracy:	±0.5 °C
Resolution:	0.1 °C
Operating temperature:	-30 to +70 °C
Storage temperature:	-40 to +70 °C
Battery type:	2 x 3 V button cell (CR 2032)
Battery life:	500 days (15 min measuring cycle, +25 °C)
Protection class:	IP65
Measuring cycle:	1 min to 24 h (can be selected)
Memory:	16000 readings
Software:	Can be used with Windows XP / Vista / 7 / 8 / 8 Pro / 8 Enterprise / 10

Temperature-humidity-pressure logger with integrated USB-interface and automatic PDF-creation.

• Incl. calibration certificate
• Memory for 3 x 60000 readings
• Useable without software (pre-programmed reading interval of 5 minutes)
• Automatic output as PDF file (no drivers required)
• Free adjustable recording interval from 30 seconds up to 24 hours (via Software Log Connect)
• Battery life > 2 years (with recording interval >15 minutes)
• Status and alarm LEDs
• With wall mount, fixing screws, an battery (1/2 AA, 3.6 V)

Specifications
Measuring range:	-40 ... +70 °C, 0 ... 99 %rh, 300 ... 1100 hPa
Accuracy:	±0.5 °C (-10 ... 40 °C) ± 3 % (40 ... 60 % rh), ±1 hPa (900 ... 1100 hPa) otherwise 0.5 %
Resolution:	0.1 °C / 0.1 %rh / 0.1 hPa
Memory:	3x 60 000 measurements
Interface:	USB (intergr.)
Housing:	ABS
Dimensions (L x W x H):	102 x 20 x 21 mm
Weight:	70 g
Battery:	1x 3.6 V lithium 1/2 AA

Alternative Data Logger LOG32T

Universal digital force gauges for tension and compression tests with integrated measuring cell.

• Turnable display with backlight
• Digital force gauge with internal sensor
• Data interface RS-232
• Selectable measuring units: N, lb, kg
• Peak-Hold function to capture peaks (measurement result will be "frozen" for a short time) or Track function mode for a continuous measurement indication (period of time approx. 10 s)
• Function to set limits, programming of Max./ Min., in pull and push direction, with output of acoustic and optical signal. Ideal mode for efficient and accurate testing of standard parts
• Auto-Power-Off
• Internal memory for up to 10 measurements
• Mini Statistics Kit: calculates the average result from up to ten stored single results, min., max., n
• Can be mounted on all SAUTER test stands

Scope of supply:
Force gauge, carrying case

Specifications
Resolution:	up to 10,000 points (total measuring range)
Internal measuring frequency:	0.5 % of Max
Internal measuring frequency:	2000 Hz
Overload protection:	150 % of Max
Thread:	M6
Dimensions (W x D x H):	66 x 36 x 230 mm
Net weight:	approx. 0.64 kg
Power supply:	Battery powered, internal

Alternative

Adapter for EBI 310 to measure two temperatures parallel. Please order 2 sensors separatly.
Further sensors available on request.

Specifications TPX 310
Measuring range (sensor):	-200 to +400°C
Working range (logger):	-30 to +70°C
Accuracy:	±2.0°C to -200 to -100°C ±1.0°C to -100 to -20°C ±0.2°C to -20 to +60°C ±0.5°C to +60 to +250°C ±1.0°C to +250 to +400°C
IP code:	IP 65
TPX 310-P1
Measuring range:	-200 to +200°C
Cable:	PTFE, 3 meters

Accessories High Precision PDF Data Logger EBI 310

Wireless temperature data logger for low temperatures. With external temperature sensor.

• Measuring range down to -200 °C
• External temperature sensor with 3 m cable
• Readout via wireless interface
• Replaceable battery
• High protection class IP67
• LCD display
• Memory for 288 values

The IF 400 base station and the Winlog.web / Winlog.wave PC software (see "Accessories for EBI 25 data loggers) are required for programming and evaluating the EBI 25-TX data logger.

Scope of supply: temperature data logger, operating manual

Specifications
Sensor: Channels: Measuring cycle:	PT1000, Binder series 620 1 1 min. ... 24 Hrs. user defineable
Measuring range:	-200 ... 199.9 °C
Accuracy (±1 digit):	±2.0 °C (-200 °C ... -100 °C) ±0.5 °C (-100 °C ... -20 °C) ±0.2 °C (-20 °C ... 60 °C) ±0.5 °C (60 °C ... 199.9 °C)
Resolution:	0.1 °C
IP code:	IP 67
Battery life:	approx. 2 years
Operation and storage temperature:	-30 ... 60 °C / -40 ... 85 °C
Dimensions (W x D x H):	48 x 27 x 95 mm
Power supply:	1 x Lithium battery 3.6 V, replaceable

Accessories Accessories for EBI 25 data loggers Alternative Wireless temperature data loggers EBI 25-T/TE

PDF data logger with different temperature sensors. Compared to the EBI 300, the EBI 310 is characterized by shorter measuring intervals and higher storage capacity.

• Automatic pdf-report creation with temperature/time values
• Transport of drugs, inoculants, blood products and primary products
• Transport of all temperature sensitive products
• Storage of reference samples in refrigerators and deep-freezers
• "Traffic light principle" by limit exceeded
• IQ/OQ procedures through standardized software and standard reporting process possible
• GMP, pharmaceutical law compliant; EN 12830, ATP, VO (EG) 37/205 compliant, 21 CFR Part 11 conform (Winlog.basic)
• Programmable via the free online configurator at www.ebi300.com

EBI 310: Data logger with internal temperature sensor
EBI 310 TE: Data logger with external precision temperature sensor, internal temperature sensor can be used additionally. Measurements in high and low temperature range
EBI 310 TH: Data logger with external humidity and temperature sensor, internal temperature sensor can be used additionally. Monitoring the relative humidity in storage and transport
EBI 310 TX: Data logger with temperature dual adapter for two exchangeable temperature sensors (not included in the scope of supply), internal temperature sensor can be used additionally

Specifications
Ambient temperature: Measuring range temp. EBI 310 / 310 TH: Measuring range temp. EBI 310 TE:	-30 to +75 °C -30 to +75 °C -200 to +250 °C
Measuring range humidity EBI 310 TH:	0 to 100 % rh
Accuracy temperature:	± 0.2 °C (-30 to +30 °C); ± 0.5 °C for remaining range
Accuracy humidity EBI 310 TH:	± 3 % (10 to 90 % rh)
Resolution temperature / humidity:	0.1 °C / 0.1 % rh
Memory capacity: Sensor:	120,000 measurements Pt1000/NTC
Battery life time:	up to two years
Measuring period:	1 s to 24 h
Maximum start delay:	72 h
Housing material:	Polycarbonate
Measuring modes:	Start/Stop, endless loop, start with button
Alarms:	5 values
Weight:	35 g
IP code:	IP 65

Large display for actual value, battery status display, easy to use software. Perfect designed instrument for monitring transportation or storage after HACCP.

• Quality surveillance in laboratories, at the production or in the storage
• Ambient conditions in manufacturing facilities
• Ambient conditions in power plants
• Monitoring of fridges for the pharma industry
• Memory for 60000 data sets
• Waterproof IP 65

Please order Software with USB-Cabel separately (9.726 413).

Specifications	LOG100 // LOG100 Cryo
Measuring range int.: Measuring range ext.:	-30 ... 70 °C // -10 ... 70 °C -50 ... 125 °C // -200 ... 350 °C
Accuracy:	0.1 °C
Precision:	±0.5 °C (-20 ... 50 °C), otherwise ±0.7 °C // Int.:±0.3 °C (-20 ... 50 °C), otherwise ±0.7 °C, Ext.: ±0.5 °C (-200 ... 250 °C), otherwise ±1.0 °C
Housing:	Plastic (ABS)
Battery:	1 x CR2032
Dimensions:	92 x 55 x 21 mm // 88 x 55 x 20 mm
Weight:	95 g
Alarm function:	Alarm for too low or too high temperatur and/or humidity values Calibration reminder

Temperature data logger with 2 connections for external temperature sensors, e.g. immersion sensor, surface or air sensor. Data is stored even if the battery is changed or empty.

• Suitable for rough environmental conditions
• Protected against splashing and jetting water
• With the appropriate temperature sensors, temperatures from -50 to 1000 °C can be measured and recorded
• Memory for 1 million values
• With easy-to-read LCD display
• Battery life up to 3 years
• With Mini USB connection and SD card slot
• Software for reading out the values is available as free download on the manufacturer's website

Scope of supply: Temperature data logger with 2 connections for external temperature sensors type T and type K, wall bracket, lock, batteries, calibration protocol

Specifications
Channels:	2 x external
Measurement cycle:	10 sec. ... 24 Hrs. user definable
Measuring range:	-50 ... 1000 °C
Accuracy ±1 digit:	±0.5 °C (-50 ... 70 °C) ±0.7 % (+70.1 ... 1000 °C)
Resolution: IP code:	0.1 °C IP65
Battery life: Operation and storage temperature: Dimensions (W x D x H):	3 years -20 ... 55 °C 55 x 30 x 95 mm
Power supply:	3 x AAA

Accessories Accessories for testo data loggers 174 / 175 / 176 / 184 Accessories TC-Temperature probes for testo measuring instruments, TC plug type K Accessories Magnetic probes for testo measuring instruments Accessories Pipe contact probe for testo measuring instruments Accessories Thermocouples with TC adapter for testo measuring instruments Accessories Immersion tip for testo measuring devices Accessories Mobile printer for testo data loggers Accessories Batteries, lithium Accessories TC-Temperature probes for testo measuring devices, TC plug type T Alternative Temperature logger testo 175 T2 Alternative Temperature logger testo 175 T1

The WiFi data logger is ideal for monitoring temperature and relative humidity in rooms. Measurement data is sent to the testo Cloud (online data storage) via wireless LAN and can be accessed and evaluated on all internet-enabled end devices. The testo Cloud Basic package can be accessed free of charge.

• Internal data memory up to 10000 measured values per channel
• Limit values adjustable via testo-Cloud
• E-mail notification when limit values are exceeded
• Current measured values can be read on the display
• Micro USB interface

-With internal temperature and humidity probe


Scope of supply: WiFi Temperature-humidity logger, testo-Cloud access (basic functionality), micro USB cable, wall bracket, batteries, calibration protocol

Sensor type:	NTC internal
Temperature range:	-30 ... 50 °C
Accuracy temperature:	±0.5 °C
Humidity range:	0 ... 100 % rH
Accuracy humidity:	±2 % rH
Measuring cycle:	15 min ... 24 h
Communication cycle:	15 min ... 24 h
Memory:	10000 measured values per channel
Dimensions:	115 x 82 x 31 mm
Weight:	250 g
Power supply:	4 x AA AlMn Mignon batteries
IP code:	IP30

Alternative WiFi Temperature-humidity logger testo Saveris 2-H2

The WiFi Temperature logger Set is suitable for temperature monitoring in refrigerators. The temperature probes with ribbon cable can simply be pushed through the refrigerator sealing. Vials for filling with glycol serve as a temperature buffer. Measurement data is sent to the testo Cloud (online data storage) via wireless LAN and can be accessed and evaluated on all internet-enabled end devices. The testo Cloud Basic package can be accessed free of charge.

• Internal data memory up to 10000 measured values per channel
• Limit values adjustable via testo-Cloud
• E-mail notification when limit values are exceeded
• Current measured values can be read on the display
• Micro USB interface

Scope of supply: WiFi Temperature logger, testo-Cloud access (basic functionality), micro USB cable, wall bracket, batteries, calibration protocol, 2 x penetration probe NTC with ribbon cable, 2 x glycol containers

Sensor type:	NTC
Temperature range:	-50 ... 150 °C
Accuracy:	±0.5 °C
Measuring cycle:	15 min ... 24 h
Communication cycle:	15 min ... 24 h
Memory:	10000 measured values per channel
Dimensions:	95 x 75 x 30.5 mm
Weight:	240 g
Power supply:	4 x AA AlMn Mignon batteries
IP code:	IP65

Accessories for EBI 25 temperature and humidity data loggers.

The WiFi data logger is ideal for monitoring temperature in rooms. Measurement data is sent to the testo Cloud (online data storage) via wireless LAN and can be accessed and evaluated on all internet-enabled end devices. The testo Cloud Basic package can be accessed free of charge.

• Internal data memory up to 10000 measured values per channel
• Limit values adjustable via testo-Cloud
• E-mail notification when limit values are exceeded
• Current measured values can be read on the display
• Micro USB interface

-With internal NTC temperature probe


Scope of supply: WiFi Temperature logger, testo-Cloud access (basic functionality), micro USB cable, wall bracket, batteries, calibration protocol

Sensor type:	NTC internal
Temperature range:	-30 ... 50 °C
Accuracy:	±0.5 °C
Measuring cycle:	15 min ... 24 h
Communication cycle:	15 min ... 24 h
Memory:	10000 measured values per channel
Dimensions:	95 x 75 x 30.5 mm
Weight:	240 g
Power supply:	4 x AA AlMn Mignon batteries
IP code:	IP65

Alternative WiFi Temperature logger testo Saveris 2-T3 Alternative WiFi Temperature logger testo Saveris 2-T2

The WiFi data logger is ideal for monitoring temperature in rooms. Measurement data is sent to the testo Cloud (online data storage) via wireless LAN and can be accessed and evaluated on all internet-enabled end devices. The testo Cloud Basic package can be accessed free of charge.

• Internal data memory up to 10000 measured values per channel
• Limit values adjustable via testo-Cloud
• E-mail notification when limit values are exceeded
• Current measured values can be read on the display
• Micro USB interface

-2 connections for external NTC temperature probes


At least one NTC temperature probe is required to operate the testo Saveris 2-T2. Please order separately.

Scope of supply: WiFi Temperature logger, testo-Cloud access (basic functionality), micro USB cable, wall bracket, batteries, calibration protocol

Sensor type:	NTC
Temperature range:	-50 ... 150 °C
Accuracy:	±0.3 °C
Measuring cycle:	15 min ... 24 h
Communication cycle:	15 min ... 24 h
Memory:	10000 measured values per channel
Dimensions:	95 x 75 x 30.5 mm
Weight:	240 g
Power supply:	4 x AA AlMn Mignon batteries
IP code:	IP65

Accessories Probes for WiFi Data logger testo Saveris 2 Accessories Pipe contact probe for testo measuring instruments Accessories NTC Temperature probes for testo measuring devices Alternative WiFi Temperature logger testo Saveris 2-T3 Alternative WiFi Temperature logger testo Saveris 2-T2 Set Alternative WiFi Temperature logger testo Saveris 2-T1

Data logger with motion sensor, integrated USB interface for automatic PDF output, and wall mount. For recording of temperature and 2 connections for external type K thermocouples.

• Incl. calibration certificate
• Freely adjustable recording interval from 10 seconds to 24 hours
• Min- and Max-values can be reset in the display
• Time marking function ("Time Marker") during data recording
• With motion sensor for shock recording
• Memory for approx. 60000 readings
• Automatic output as PDF file, device can also be used without software
• No driver installation needed
• Status and alarm LEDs, with buzzer
• Display can be switched off
• Battery life > 4 years at > 15 min recording interval
• USB interface for data transfer
• Software available for download on the manufacturer's website (free of charge)

Temperature probes are available separately.

Scope of supply: Data logger, 2 thermocouples type K with 1 m length, wall mount, battery (1/2 AA, 3.6 V), USB cover, screws and dowels

Accessories Sensor cable extension Accessories Thermocouple, thermocouple Type K, fibre glass insulated Accessories Thermocouple, thermocouple Type K, PTFE insulated Accessories Thermocouple, thermocouple Type K, with steel braided cable Accessories Immersion probe, thermocouple Type K, with handle Accessories Immersion probe, thermocouple Type K, without handle Accessories Immersion/insertion probe, thermocouple Type K Accessories Insertion probe, thermocouple Type K Accessories Insertion probe, thermocouple Type K, heat-resistant Accessories Surface probe, thermocouple Type K Accessories Immersion probe, thermocouple Type K Accessories Surface probe, thermocouple Type K, with thermocouple spring Accessories Surface probe, thermocouple Type K, with 4 mm contact area

Ideal for low-cost temperature monitoring of transports. For evaluation, the data logger is connected to the USB interface and a PDF report is generated automatically. No hardware or software necessary.

• Auto generating PDF format data report
• 60 days runtime
• 10000 measurements every 10 minutes
• Change of configuration (alarm, interval ...) on request
• Integrated USB connector
• Start by button
• LED Alarm display
• Serial number sticker
• Inclusive certificate
• Food-safe according to HACCP
• Compliant to EN12830 S,T,C,D,1 and GDP

Temperature range:	-30 ... 60 °C
Accuracy:	±0.5 °C at -20 °C ... 40 °C / ±1.0 °C in remaining range
Resolution:	0.1 °C
Data memory:	10000 measurements
Recording cycle:	60 days
Sampling interval:	10 minutes
Shelf life:	24 months
Dimensions (L x W x H):	69 x 33 x 5 mm
Weight:	10 g
IP code:	IP67

Temperature probes with TC plug type T.