Laboratory thermometers

Solid stem, with loop, capillary yellow enameled, graduation resistant against acids and alkalis. Red filling or environmentally friendly blue filling.

Enclosed-scale type, with eyelet. With uncoated, prismatic measuring capillary. Red spirit filling (except 9.235 265: blue).

Glass, solid stem, with loop, white backed. Environmentally friendly thermometer, with biodegradable, green spirit filling.

Graduation resistant against acids and alkalies.

For monitoring critical temperature conditions in deep freezes, refrigerators, cold rooms, blood bank refrigerators, incubators and warming chambers.

• thermometer certifiable to National Standards
• supplied with works test certificate
• thermometer stem safely encapsulated in PTFE
• each thermometer is mounted in a square-shaped shatter-proof plastic bottle filled with a liquid to ensure accurate readings despite the opening and closing of instrument doors.
• each thermometer has an individual serial number.

Suitable for official calibration. Enclosed scale type, 8 to 9mm diameter, with translucent glass scale and Richter seal. Prismatic, uncoated measuring capillary. The -200 to 30°C thermometer has a luminous blue measuring capillary, and is pentane filled. Further thermometers are available, red toluene filled with uncoated measuring capillary. Graduated every 1°C.

Capillary: yellow enameled, round.

For measuring low temperatures from -100 up to 30 °C. Enclosed scale DIN 12778. Immersion depth total.

Display of current, highest and lowest temperature, hold function, alarm at freely adjustable temperature values optical and audibly (upper/lower limit), selectable °C/°F readout. Supplied with table stand and magnet. 3V Lithium CR2032 button cell (acc. to EN 13485).

Strips for 8 temperatures. 5 types cover the measuring range 37 to 260 °C, each strip displays 8 different temperatures. Each strip measures 50 x 18 mm.

With 8 mm diameter stem. With cork seal, round collar, upper section approx. 235 x 20 mm. Prismatic, yellow measuring capillary. Available either red or green spirit-filled. Milk glass scale.

Handy, waterproof infrared thermometer with large measurement range for non-contact measurement of the surface temperature and secure core temperature measurement with the folding penetration probe. For time-saving, precise temperature measurements at incoming goods, production and storage of diverse goods and food. Conform to HACCP and DIN EN 13485. With battery and factory calibration certificate.

• Display with backlight for reading in dark environments
• Display can be upside down for reading from both sides
• Double laser pointer

• Ivory plastic
• With push button
• Mercury-free

Plastic, with loop or hook clip mountings. Measuring range -40 to 40°C. Graduated every 1 °C. Dimensions (L x dia.) 185 x 20 mm.

Digital thermometer, wall hanging, for indoor or outdoor use. With blue, splash-proof casing, selectable °C/°F ranges and battery.

With NS 14.5/23 cone. Enclosed-scale type, Translucent glass scale. Upper section approx. 11 mm diameter, lower section 7.5 mm diameter. Richter-top finish seal without button. Suitable for official calibration.

Environmentally friendly thermometer, with biodegradable filling, with ring at top, milk glass scale, uncoated, prismatic measuring capillary, in transparent square plastic case.

The filling medium of the bottle gives the temperature sensors the necessary inertia to obtain stable measurement results even after opening the devices.

• Thermometers traceable to international standards (with certificate of conformance and accuracy)
• Temperature units: °C or °F
• 3 display modes: maximum, minimum, and current temperature
• Alarm function
• 3 m long cable (diameter: 1 mm)
• Alkaline battery (AAA) included
• Plastic bottle made of PETG filled with 30 ml ethylene glycol mixture
• With fold-out stand
• Individual serial numbers

5-step irreversible temperature measuring strips covering the temperature range 29 to 290°C. Each strip measures 35 x 15mm.