-
- General laboratory consumables
- Occupational safety, Security
- Analytical measurement and testing
- Stirring, Shaking, Mixing
- Sample preparation
- Distillation, separation, filtration
- Heating and cooling technology
- Liquid Handling
- Vacuum technology, Drying, Dry storage
- Optical instruments and microscopes
- Cleaning and sterilisation
- Environmental-, soil-, water-, food analysis
- Chromatography
- Cleanroom
Electrodes for conductivity measurement
Conductivity sensors InLab® for Mettler Toledo conductivity meters
![A click opens this product segment](/lab/shop/pic/150x150/owweb/9041447_1.jpg)
710: 4 platinum poles
720 + 751-4 + 752-6: 2 platinum poles
731 + 738: 4 graphite poles
741 + 742: 2 steel poles
ISM® (Intelligent Sensor Management) is a sophisticated safety concept that leaves nothing to chance. The instrument automatically detects the connected sensor and uses the most up-to-date calibration data stored on the sensor chip....
Conductivity cell probes
![A click opens this product segment](/lab/shop/pic/150x150/owweb/9704081_3.jpg)
For all pocket measuring devices for analog measuring cells from the 3xx series, as well as all inoLab laboratory measuring devices for analog measuring cells.
Standard conductivity cell probe TetraCon® 325:
4-pole cell with integral temperature sensor. Measuring range: 1µS/cm to 2S/cm....
IDS conductivity cell probes
![A click opens this product segment](/lab/shop/pic/150x150/owweb/7656781_1.jpg)
For connection to WTW IDS measuring instruments.
IDS conductivity cell probe TetraCon® 925:
Intelligent digital 4-pole cell with integral temperature sensor. Automatical transfer of the cell constant. Cable length 1.5 metres. Measuring range: 1µS/cm to 2S/cm.
TetraCon® 925-3:...
Conductivity cell probes
![A click opens this product segment](/lab/shop/pic/150x150/owweb/9704078_1.jpg)
For all Cond handheld meters for analogue measuring cells from the 3xx series, as well as all inoLab
® laboratory measuring devices for analogue measuring cells. Except for the Cond 3110, Multi 340 handheld meters.
Ultra-pure water conductivity cell probe LR 325/01:
With integral temperature sensor and flowthrough vessel D 01/T for measuring very low conductivity ranges (<1 µS/cm) e.g. boiler feed water or deionised water. Cable length 1.5 metres. Min. / max. insertion depth 35 / 110mm and flowthrough, measuring range: 0.001µS/cm to 200µS/cm....
Conductivity measuring cells
![A click opens this product segment](/lab/shop/pic/150x150/owweb/6270567_1.jpg)
With plastic shaft and internal temperature sensor NTC30 kOhm, temperature range -5 to 80 °C. Cable with 8-pole plug.
LF 435 T: Conductivity measuring cells with 4 electrode technique for a large measuring range of 5 µS/cm to 500 mS/cm, low maintanance and easy cleaning. For general measurements. With 1.5 m cable....
Ion selective combination electrodes perfectION™
![A click opens this product segment](/lab/shop/pic/150x150/owweb/s6685_1.jpg)
With integrated reference electrode. Easy cleaning of the diaphragm between measurements with Click & Clear™ (except Na electrode): by pressing the electrode head, the electrolyte solution flows through the diaphragm. The electrolyte can be easily emptied and refilled. Optimum contact between sample and electrolyte solution is always guaranteed....
pH/ORP electrodes SensoLyt® ProcessLine
![A click opens this product segment](/lab/shop/pic/150x150/owweb/7618407_1.jpg)
For the SensoLyt ® armature, for the installation in a flow vessel or in a replacement fitting
- For drinking water, wastewater or in the process
- Also for high pressure and temperature conditions
- Easy to maintain by easy measuring chain replacement