Electrodes for conductivity measurement

Filter

 Conductivity sensors InLab® for Mettler Toledo conductivity meters

Mettler-Toledo

710: 4 platinum poles
720 + 751-4 + 752-6: 2 platinum poles
731 + 738: 4 graphite poles
741 + 742: 2 steel poles
ISM® (Intelligent Sensor Management) is a sophisticated safety concept that leaves nothing to chance. The instrument automatically detects the connected sensor and uses the most up-to-date calibration data stored on the sensor chip....

 Conductivity cell probes

WTW

For all pocket measuring devices for analog measuring cells from the 3xx series, as well as all inoLab laboratory measuring devices for analog measuring cells.

Standard conductivity cell probe TetraCon® 325:
4-pole cell with integral temperature sensor. Measuring range: 1µS/cm to 2S/cm....

 IDS conductivity cell probes

WTW

For connection to WTW IDS measuring instruments.

IDS conductivity cell probe TetraCon® 925:
Intelligent digital 4-pole cell with integral temperature sensor. Automatical transfer of the cell constant. Cable length 1.5 metres. Measuring range: 1µS/cm to 2S/cm.
TetraCon® 925-3:...

 Conductivity cell probes

WTW

For all Cond handheld meters for analogue measuring cells from the 3xx series, as well as all inoLab ® laboratory measuring devices for analogue measuring cells. Except for the Cond 3110, Multi 340 handheld meters.

Ultra-pure water conductivity cell probe LR 325/01:
With integral temperature sensor and flowthrough vessel D 01/T for measuring very low conductivity ranges (<1 µS/cm) e.g. boiler feed water or deionised water. Cable length 1.5 metres. Min. / max. insertion depth 35 / 110mm and flowthrough, measuring range: 0.001µS/cm to 200µS/cm....

 Ion-selective electrodes

WTW

Combined ISE and GSE electrodes....

 Connection cable for conductivity flow cell TetraCon® DU / T

WTW

...

 Conductivity measuring cells

SI Analytics

With plastic shaft and internal temperature sensor NTC30 kOhm, temperature range -5 to 80 °C. Cable with 8-pole plug.

LF 435 T: Conductivity measuring cells with 4 electrode technique for a large measuring range of 5 µS/cm to 500 mS/cm, low maintanance and easy cleaning. For general measurements. With 1.5 m cable....

 Ion selective combination electrodes perfectION™

Mettler-Toledo

With integrated reference electrode. Easy cleaning of the diaphragm between measurements with Click & Clear™ (except Na electrode): by pressing the electrode head, the electrolyte solution flows through the diaphragm. The electrolyte can be easily emptied and refilled. Optimum contact between sample and electrolyte solution is always guaranteed....

 pH combination electrode InLab® Solids

Mettler-Toledo

With spear-tip membrane. With glass shaft, Argenthal™ reference system and S7 plug head.

Cable - please order separately....

 pH/ORP electrodes SensoLyt® ProcessLine

WTW

For the SensoLyt ® armature, for the installation in a flow vessel or in a replacement fitting

  • For drinking water, wastewater or in the process
  • Also for high pressure and temperature conditions
  • Easy to maintain by easy measuring chain replacement
...

 Cables AS/IDS for electrodes with plug head

WTW

...

 Powder pillow

Hach

Powder reagents in individually sealed packages....

 Orion™ DuraProbe™ conductivity cells with 4 electrodes

LLG

Robust and precise 4 electrode graphite cells with temperatue compensation. Errors based on fringe field interference are avoided. Epoxy body.

013005MD
For use with conductivity meters Orion Star, Orion Star Plus

013010MD and 013605MD
For use with conductivity meters Star A112, Star A122, Star A212, Star A215, Star A222, Star A322, Star A325, Star A329, Versa Star, Versa Star Pro...

 Electrode arm EasyPlace™ for benchtop meters SevenDirect™

Mettler-Toledo

Complete electrode arm EasyPlace™ for mounting and precise positioning of electrodes....

 pH combination electrodes InPro 4260/4262

Mettler-Toledo

Low-maintenance pH electrodes with integrated temperature sensor for temperature compensation. Recommended for media containing sulphides.

  • Suitable for low-water and dirty media.
  • Insensitive to anionic salts
  • "i" version with integrated sensor management ISM
  • With Ex-certification
...

 pH tester Pocket Tester SD10 pH

Lovibond

Pocket Tester with waterproof housing for measuring pH, mV, and temperature. Ideal for regular checks in industrial plants or swimming pools. With lanyard and clip on the device head.

  • Three-colour LED lighting system (blue, green, red) and display symbols for easy handling
  • 3 multifunction buttons with symbols
  • Up to 3 calibration points
  • With stability indicator, alarm for limits, auto-hold, and auto-off function
  • Transparent lid for measurement, calibration, and storage of the electrode
  • Optimised lid design for an upright and stable position of the tester
  • Battery operation (4 x AAA batteries)
  • Easy battery and electrode replacement
...

 Replacement electrode for pH tester Pocket Tester SD10 pH

Lovibond

pH replacement electrode with gel electrolyte and highly sensitive glass membrane for the Pocket Tester SD10 pH.

  • Precise pH determination with integrated NTC temperature sensor (ATC)
  • Simple exchange mechanism of the pH electrode
  • Low maintenance, robust, and inexpensive
...

 Conductivity tester Pocket Tester SD30 EC

Lovibond

Pocket Tester with waterproof housing for measuring conductivity, TDS, salinity, and temperature. Ideal for regular checks in industrial plants or swimming pools. With lanyard and clip on the device head.

  • Three-colour LED lighting system (blue, green, red) and display symbols for easy handling
  • 3 multifunction buttons with symbols
  • Up to 3 calibration points
  • With stability indicator, auto-hold, and auto-off function
  • Transparent lid for measurement, calibration, and storage of the electrode
  • Optimised lid design for an upright and stable position of the tester
  • Battery operation (4 x AAA batteries)
  • Easy battery and electrode replacement
...

 Multi-parameter tester Pocket Tester SD40 Multi

Lovibond

Pocket Tester with waterproof housing for measuring pH, conductivity, TDS, salinity, and temperature. Ideal for regular checks in industrial plants or swimming pools. With lanyard and clip on the device head.

  • Three-colour LED lighting system (blue, green, red) and display symbols for easy handling
  • 3 multifunction buttons with symbols
  • Up to 3 calibration points
  • With stability indicator, auto-hold, and auto-off function
  • Transparent lid for measurement, calibration, and storage of the electrode
  • Optimised lid design for an upright and stable position of the tester
  • Battery operation (4 x AAA batteries)
  • Easy battery and electrode replacement
...

 Laboratory Thermometer TFX 410-1 / TFX 420

ebro

Robust and impact resistant temperature measurement device for Pt 1000 penetration probe (connection Lemo size 0). TFX 420 with MIN, MAX & Hold function. For control measurements in laboratories, food sector, storage and incoming goods. For temperature determination of air, liquids, plastic substances and food. Conform to HACCP and DIN EN 13485. With battery and factory calibration certificate....

Conductivity cell probe K10 conductivity 0 - 150
µ
S, 2 x 120 mm body: glass, plate: Pt

Sentek

PO number Package size Price per package    

1

9950292

This product of our assortment corresponds with your search.

1 piece Login / Register here
shopping_cart

Conductivity cell probe K21 conductivity 0,1 - 500
µ
S, 12 x 100 mm body: Epoxy resin, plate: carbon

Sentek

PO number Package size Price per package    
9950294

This product of our assortment corresponds with your search.

1 piece Login / Register here
shopping_cart

Conductivity-Probe HI 763100 with 3.5 mm plug and 1 m cable

HANNA

PO number Package size Price per package    

1

HI763100

This product of our assortment corresponds with your search.

1 piece Login / Register here
shopping_cart

1-channel-temperature-meter testo 926 w. oven probe, type T, w. 3 test points 105°C-150°C-200°C

Testo

PO number Package size Price per package    
4665254

This product of our assortment corresponds with your search.

1 piece Login / Register here
shopping_cart

2-Cell conductivity/ATC electrode, stainless steel sensor, (700 or 2700 series)

Thermo

PO number Package size Price per package    
6280916

This product of our assortment corresponds with your search.

1 piece Login / Register here
shopping_cart

Add to shopping cart