conducitvity meters, tabletop devices

The Thermo Scientific™ VisionMate™ ST Barcode Reader is a compact single tube reader used for instant scanning of individual 2D barcoded tubes into any file or database application. Simple plug-and-play installation via automatically installed USB port allows simple and easy set up. USB working temperature: 4 to 30 °C.

• Instant read time
• Simple to install and use
• For individual sample retrieval
• Export via comma-separated variable file, Microsoft^® Excel™, XML, COM port, ODBC or TCP socket
• Supported Barcode Type: any Thermo Scientific 2D Barcoded Storage Tube as well as virtually any other tube with high contrast 2D codes

The inoLab^® benchtops are perfectly designed for modern laboratory surroundings. The key pads are clearly outlined and easy-to-operate, their smooth surfaces are easy-to-clean and the operation is self-explanatory. All meters include a universal power supply and a convenient stand with sensor support. If desired they can be ordered in application oriented sets including sensors and accessories.
This is the inoLab^® Cond 7310 or inoLab^® Cond 7310P. A modern backlit graphic display with menu controlled user interface allows easy and intuitive operation. The mini USB-B interface provides fast data transfer to a PC. The internal memory can record up to 5000 GLP complying data including ID, date and time. The housing and the keypad are easy-to-clean. The inoLab^® Cond 7310 has the possibility to connect different standard and special conductivity electrodes and has automatic and manual temperature compensation (can even be switched off for pure water measurements according pharmacopeia) for linear and non-linear function according EN 27 888. An integrated thermal printer (58mm width) is ready for printout of the measured data (option). The scope of delivery includes meter, stand, power supply and USB cable.

Specifications
Ranges:	All values +/-1 digit
Conductivity additional:	0.00 ... 1000 mS/cm +/- 0.5 % of measured value 0.000 ... 1.999 µS/cm, K= 0.01 cm-1 0.00 ... 19.99 µS/cm, K= 0.1 cm-1
Spcific resistance:	0.00 ... 20 MOhm cm
Salinity:	0.0 ... 70.0 (acc. IOT)
TDS:	1 ... 1999 mg/l, 0 ... 199.9 g/l
Temperature:	-5.0 ... 105.0 °C +/- 0.1 °C
Cell constants:	Fix 0.01 cm-1, calibratable 0.450…0.500 cm-1, 0.800 ... 0.880 cm-1, calibratable 0.09 … 0.110 cm-1, 0.250 … 25.0 cm-1
Calibration: Tref:	1 point 20 °C / 25 °C
Temperature compensation:	None, nlF, 0.000 … 10.00 %/K
Calibration memory:	Up to 10 calibrations recallable
Display:	LCD Graphic, backlit
Memory: Logger:	Manual 200/5000 automatic Manual/time controlled
Interface:	Mini USB-B
Power supply:	Universal power supply, 100V ... 240 V, 50/60 Hz, 4 x 1.5 V AA or 4 x 1.2 V NiMH

Modulares Profi-System für die Messung von pH-Wert / Redox-Potential, Leitfähigkeit / Salinität / TDS und Ionenkonzentration. Bestückung bzw. spätere Erweiterung mit 1, 2 oder 3 Messmodulen in beliebiger Kombination möglich.

• Großer, hochauflösender 7" Farb-Touchscreen (kapazitiv), optimale Übersicht und Bedienbarkeit
• Modularität und Flexibilität ohne Grenzen: bis zu 3 Messmodule parallel betreibbar, jederzeit auf 3 Kanäle erweiterbar
• Universelle Kommunikation via 2 x USB, Ethernet (LAN) und RS232-Volltext-Bedienerführung in 10 Sprachen mit Help-Menü
• OneClick™ Bedienkonzept: individuell konfigurierbare Funktionen / Abläufe mit einem Tastendruck starten
• Methodenspeicher
• Höchste Sicherheit und GxP-Unterstützung (ID-Schutz, ausgefeiltes User-Management, Grenzwerte / Alarme, integrierte Funkuhr etc.)
• Intelligentes Sensor Management (ISM^®)
• Anschluss von Rührer, automatischem Probenwechsler, PC, Barcode-Leser, Tastatur, Drucker (lokal oder im Netzwerk)
• Speicher für 20000 Datensätze (Messwerte, Kalibrierungen, Methoden)
• 17 vordefinierte, 60 benutzerdefinierte Methoden
• 5-Punkt-Kalibration (pH) mit 13 vordefinierten, 20 benutzerdefinierten Puffergruppen inkl. Temperaturtabelle
• uPlace™ Elektrodenhalter mit absolut vertikaler Bewegung
• Alle METTLER TOLEDO Elektroden anschließbar, empfohlen: ISM^®-Elektroden

Lieferumfang:
S470-Basic: Gerät, 1 x Leitfähigkeits-Modul, 1 x pH-/mV-Modul, 1 x Leermodul, uPlace™ Elektrodenhalter, Abdeckhaube, Bedienungsanleitung, Installations- und Quick-Guide, LabX^® direct pH PC-Software, Konformitätserklärung, Prüfzertifikat
S470-Kit: wie S470-Basic aber mit InLab^® Expert Pro-ISM, pH-Bestimmungsanleitung, je 2 Pufferbeutel für pH 4,01, 7,00, 9,21 und 10,00.
S470-USP/EP: wie S470-Kit aber mit InLab^® 741-ISM antstelle von InLab^® 731-ISM und InLab^® Pure Pro-ISM anstelle von InLab^® Expert Pro-ISM, BNC/RCA-MultiPin™ ISM-Kabel (1,2 m), ohne 1413 µS/cm und 12,88 mS/cm Kalibrierbeutel

Spezifikationen	Messbereich // Auflösung // Genauigkeit
Temperature MTC/ATC:	-30,0 ... 130,0 °C // 0,1 °C // ± 0.1 °C
pH:	-2,000 ... 20,000 // 0,001 / 0,01 / 0,1 // ± 0,002
mV:	-2000,0 ... 2000,0 // 0,1 / 1 // ± 0,1
Rel. mV:	-2000,0 ... 2000,0 // 0,1 / 1 // ± 0,1
ISFET pH:	0,000 ... 14,000 // 0,001 / 0,01 / 0,1 // ± 0,05
Leitfähigkeit:	0,001 ... 999999 µS/cm // 0,001 ... 1 // ± 0,5% 0,001 ... 2000 mS/cm // 0,001 ... 1 // ± 0,5% 0,001 ... 200 S/m // 0,0001 ... 1 // ± 0,5% 0,001 ... 200000 mS/m // 0,0001 ... 1 // ± 0,5% 0,1 ... 999999 µS/m // 0,001 ... 1 // ± 0,5%
TDS:	0,001 ... 1000 g/l , ppt // 0,001 ... 1 // ± 0,5% 0,001 ... 999999 mg/l , ppm // 0,001 ... 1 // ± 0,5%
Salinität:	0,01 ... 80,0 psu , ppt // 0,01 ... 0,1 // ± 0,5%
Widerstand:	0,01 ... 100,0 MΩ x cm // 0,0001 ... 1 // ± 0,5% 0,01 ... 999999 Ω x cm // 0,01 ... 1 // ± 0,5%
Leitfähigkeit Asche:	0,000 ... 2022 % // 0,001 ... 1 // ± 0,5%

Modulares Profi-System für die Messung von pH-Wert / Redox-Potential, Leitfähigkeit / Salinität / TDS und Ionenkonzentration. Bestückung bzw. spätere Erweiterung mit 1, 2 oder 3 Messmodulen in beliebiger Kombination möglich.

• Großer, hochauflösender 7" Farb-Touchscreen (kapazitiv), optimale Übersicht und Bedienbarkeit
• Modularität und Flexibilität ohne Grenzen: bis zu 3 Messmodule parallel betreibbar, jederzeit auf 2 oder 3 Kanäle erweiterbar
• Universelle Kommunikation via 2 x USB, Ethernet (LAN) und RS232-Volltext-Bedienerführung in 10 Sprachen mit Help-Menü
• OneClickT™ Bedienkonzept: individuell konfigurierbare Funktionen / Abläufe mit einem Tastendruck starten
• Methodenspeicher
• Höchste Sicherheit und GxP-Unterstützung (ID-Schutz, ausgefeiltes User-Management, Grenzwerte / Alarme, integrierte Funkuhr etc.)
• Intelligentes Sensor Management (ISM^®)
• Anschluss von Rührer, automatischem Probenwechsler, PC, Barcode-Leser, Tastatur, Drucker (lokal oder im Netzwerk)
• Speicher für 20000 Datensätze (Messwerte, Kalibrierungen, Methoden)
• 17 vordefinierte, 60 benutzerdefinierte Methoden
• Kalibration: 13 vordefinierte und 20 benutzerdefinierte Standards
• uPlace™ Elektrodenhalter mit absolut vertikaler Bewegung
• Alle METTLER TOLEDO Elektroden anschließbar, empfohlen: ISM^®-Elektroden

Lieferumfang:
S700-Basic: Gerät, 1 x Leitfähigkeitsmodul, 2 x Leermodul, uPlace™ Elektrodenhalter, Abdeckhaube, Bedienungsanleitung, Installations- und Quick-Guide, LabX^® direct pH PC-Software, Konformitätserklärung, Prüfzertifikat
S700-Kit: wie S700-Basic, zusätzlich mit InLab^® 731-ISM, Leitfähigkeits-Bestimmungsanleitung, 2 Kalibrierbeutel für 1413 µS/cm und 12,88 mS/cm
S700-Trace: wie S700-Kit aber mit InLab^® Trace anstelle von InLab^® 731-ISM, mit spezifischer Durchflusszelle, ohne Kalibrierbeutel

Spezifikationen	Messbereich // Auflösung // Genauigkeit
Temperature MTC/ATC:	-30,0 … 130,0 °C // 0,1 °C // ± 0.1 °C
Leitfähigkeit:	0,001 … 999999 µS/cm // 0,001 … 1 // ± 0,5% 0,001 … 2000 mS/cm // 0,001 … 1 // ± 0,5% 0,001 … 200 S/m // 0,0001 … 1 // ± 0,5% 0,001 … 200000 mS/m // 0,0001 … 1 // ± 0,5% 0,1 … 999999 µS/m // 0,001 … 1 // ± 0,5%
TDS:	0,001 … 1000 g/l // 0,001 … 1 // ± 0,5% 0,001 … 999999 mg/l // 0,001 … 1 // ± 0,5%
Salinität:	0,01 … 80000 mg/l // 0,01 … 0,1 // ± 0,5%
Widerstand:	0,01 … 100,0 MΩ x cm // 0,0001 … 1 // ± 0,5% 0,01 … 999999 Ω x cm // 0,01 … 1 // ± 0,5%
Leitfähigkeit Asche:	0,000 … 2022% // 0,001 … 1 // ± 0,5%

The inoLab^® benchtops are perfectly designed for modern laboratory surroundings. The key pads are clearly outlined and easy-to-operate, their smooth surfaces are easy-to-clean and the operation is self-explanatory. All meters include a universal power supply and a convenient stand with sensor support. If desired they can be ordered in application oriented sets including sensors and accessories.
Modern conductivity measurement is easy to do. the inoLab^® Cond 7110 has all important functions for measuring conductivity like adjustable reference temperature and different methods of temperature compensation. A big LCD segment display makes readings easy and a well-arranged keypad provides convenient operation. The automatic AutoRead function supports correct and repeatable results. Each meter come with a stand and accessories.

Specifications
Ranges:	All values +/-1 digit
Conductivity:	0.00 ... 1000 mS/cm +/- 0.5 % of measured Value 0.00 ... 19.99 µS/cm (at K= 0.1 cm-1)
Salinity:	0.0 ... 70.0 (acc. IOT)
Temperature:	-5.0 ... 105.0 °C +/- 0.1 °C
AutoRead:	Automatic
Power supply:	Universal power supply, 100V ... 240 V, 50/60 Hz, 4 x 1.5 V AA or 4 x 1.2 V NiMH

Precision hand-held measuring instrument with Pt100 temperature sensor and data logger function for resistance thermometers.

• Functions: °C / °F selection, min / max memory, freeze display, calibration mode, data logger, automatic switch-off
• Relative measurement: saves the last measured temperature and shows the difference to the most similar measurement
• Display: date / time, backlit, battery status
• Pt100 temperature sensor 4-wire, class A, IEC751 (replaceable)

Scope of supply: Thermometer, Pt100 temperature sensor, carrying case, power adapter

Specifications
Measuring range:	-100 ... +400 °C
Accuracy:	±0.2 °C (-50 ... +150 °C)
Resolution:	0.01 °C
Ambient temperature:	0 ... +50 °C
Memory:	16000 values
Material Thermometer / Probe:	plastic / platinum
Dimensions Thermometer (W x D x H) / Probe (Ø x L):	185 x 65 x 36 mm / 5 x 230 mm
Cable length:	1.5 m
Power supply:	9 V battery or 9 V DC power adapter

The conductivity meter SD30 is a robust benchtop device for measuring conductivity, TDS, salinity, resistivity, and temperature.

• Large 7" touch screen with intuitive user interface
• Electrode arm EasyPlace™ places the sensor precisely
• Intelligent Sensor Management (ISM^®) ensures the correct use of the connected sensor
• Automatic data transfer to PC or printer
• 1 or 2 calibration points
• Additional splash protection thanks to removable cover
• GLP compliant

Scope of supply: Conductivity meter, electrode arm EasyPlace™, protective cover, power supply, get-started-guide

Conductivity:	0 µS/cm ... 2000 mS/cm
Accuracy:	0.5 % of measured value
TDS:	0.00 mg/l ... 1000 g/l
Accuracy:	0.5 % of measured value
Salinity:	0.00 ... 80.00 psu
Accuracy:	0.5 % of measured value
Resistivity:	0.00 ... 100.0 MΩ x cm
Accuracy:	0.5 % of measured value
Temperature range:	-30 ... 130 °C
Accuracy:	±0.1 (0 ... 100 °C)
Resolution:	0.1 °C
IP code:	IP54

The meter kits are suitable for measuring the conductivity of samples and can be used in a wide range of laboratory areas.

• Conductivity meter SD30 with large 7" touch screen and Intelligent Sensor Management (ISM^®)

-Conductivity sensor InLab^® 731-ISM with epoxy shaft and NTC 30 kΩ temperature sensor. The 4-pole measuring cell made of graphite eliminates polarisation effects and ensures high linearity over a wide conductivity range


Scope of supply: Conductivity meter SevenDirect™ SD30, electrode arm EasyPlace™, conductivity sensor InLab^® 731-ISM, 2 x 2 conductivity standard sachets 1413 µS/cm and 12.88 mS/cm, protective cover, power supply, get-started-guide

The meter kits are suitable for measuring the conductivity of samples and can be used in a wide range of laboratory areas.

• Conductivity meter SD30 with large 7" touch screen and Intelligent Sensor Management (ISM^®)

-Conductivity sensor InLab^® 741-ISM with stainless steel shaft and NTC 30 kΩ temperature sensor. The 2-pole measuring cell made of stainless steel is particularly suitable for measuring samples with low conductivity


Scope of supply: Conductivity meter SevenDirect™ SD30, electrode arm EasyPlace™, conductivity sensor InLab^® 741-ISM, 2 conductivity standard sachets 84 µS/cm, protective cover, power supply, get-started-guide

FiveEasy™ and FiveEasy™ Plus benchtop meters provide high quality conductivity measurements with the simple click of a button. They are the perfect choice for reliable measurement data at a reasonable price.

• Large, easy to read and easy to understand display with all information visible at a glance
• Five self-explanatory buttons making operation simple and easy
• Fast and easy connectivity for simple and secure data transfer (FP only)
• Electrode arm extension pole included

Scope of supply:
F30/FP30-Meter: Meter with CD operating instructions, QuickGuide, declaration of conformity, test certificate, universal power supply with plug adapter EU and UK
F30/FP30-Standard: as F30/FP30-Meter, plus LE703 conductivity sensor, 1 each x 1413 µs/cm and 12.88 mS/cm standard sachets

Specifications
Measuring range (Accuracy)
Conductivity F30 / FP30:	0.01 µS/cm ... 200 mS/cm / 0.01 µS/cm ... 500 mS/cm (± 0.5 % of measured value)
TDS F30 / FP30:	0.01 mg/l ... 200g/l / 0.01 mg/l ... 300 g/l
Temperature F30 / FP30:	0 ... 100 °C (0.5 °C) / -5 ... 105 °C (0.3 °C)
Calibration F30:	1 point, 3 predefined standards
Calibration FP30:	1 point, 3 predefined standards, manual cell constant input
Input:	Mini-DIN
Temperature compensation:	Linear: 0.00 %/°C ... 10.00 %/°C
Reference temperature:	20 °C and 25 °C
Power supply:	100 ... 240 V / 50 ... 60 Hz / 12 V DC
FP30 only
Salinity:	0.00 ... 42 psu
Memory:	200 measurements
Interface:	RS232, USB

Compact conductivity meter for easy measurement of conductivity, salinity, and TDS.

• Large 5" LCD display with backlight
• 1- to 5-point calibration (conductivity and TDS)
• 1-point calibration (salinity)
• Calibration with automatic standard recognition or manual entry
• Automatic or manual temperature compensation and 1-point temperature calibration
• Memory for up to 500 data points
• Easy data export with supplied PC cable
• With electrode stand for easy positioning of the probe in the sample
• Logs with date and time stamp for GLP-compliant work

Scope of supply: Conductivity meter, electrode stand, conductivity electrode CONSEN9501D, conductivity standard 1413 µS/cm, PC cable, universal power supply with plug adapter EU, UK, AUS, US, and China

Conductivity:	0.00 µS/cm ... 500.0 mS/cm
Resolution (conductivity):	0.01 µS/cm / 0.1 µS/cm / 1 µS/cm / 0.01 mS/cm / 0.1 mS/cm
Accuracy (conductivity):	±0.5 % of measured value
TDS:	0.00 ppm ... 500.0 ppt
Resolution (TDS):	0.01 ppm / 0.1 ppm / 1 ppm / 0.01 ppt / 0.1 ppt
Accuracy (TDS):	±0.5 % of measured value
Salinity:	0.00 ... 80.0 ppt
Resolution (salinity):	0.01 ppt / 0.1 ppt
Accuracy (salinity):	±0.5 % of measured value
Temperature:	-5.0 ... 105.0 °C
Resolution (temperature):	0.1 °C
Accuracy (temperature):	±0.3 °C

Benchtop meter for electrolytic conductivity measurement in the laboratory. The unit can be operated with either 2-pole or 4-pole measuring cells. Temperature compensation is automatic with Pt 1000 / NTC 30 kOhm temperature sensors or manual.

• Large, bright LED display
• Robust housing with stainless steel cover
• Sensoface^® monitors sensor and measuring equipment
• Device self-test Fullcheck^® checks the functionality of the device
• Automatic calibration with standard solutions
• Protocols for QM documentation according to DIN ISO 9000 and GLP
• RS232 interface

Measuring range conductivity:	0.000 µS/cm ... 2000 mS/cm
Accuracy:	<0.5 % of measured value ±2 digits
Resolution:	0.001 µS/cm
Permissible cell constant:	0.001 ... 199.9 cm-1, adjustable
Temperature range:	-50 ... 150 °C
Accuracy:	0.3 K
Temperature compensation:	Automatic (Pt 1000 / NTC 30 kOhm) or manual
Dimensions (W x D x H):	244 x 255 x 95 mm
Weight:	2 kg
Power supply:	230 V, 48 ... 62 Hz
IP code:	IP 54