Turbidity

Manufactured from borosilicate glass 3.3 according to sedimentation tests according to DIN 12672 standard. Featured with volume graduation of 1000 ml. Volume graduations and inscriptions are printed with white enamel.

Graduations, ml:	Subdivisions ml:
0 to 2	0.1
2 to 10	0.5
10 to 40	1.0
40 to 100	2.0
100 to 1000	50.0

Accessories Stands for Imhoff cones, PMMA

For determining the depth of visibility and light permeability of water. Sturdy design made of strong, hard-wearing plastic. Lead weight for better lowering. The approx. 15 cm high rod is fitted with an eyelet for fastening the lowering engine. The lowering line is marked in intervals of 100 cm with figures from 1 to 10 and in between additionally with line markings each 50 cm for better reading of the depth of visibility while the disk is being lowered.
Lowering line, please order separately.

The microprocessor-based waterproof Infra-Red Turbidity meter TN-100 is easy-to-use and meets all rigor of rugged field applications. Using an Infrared light source, it delivers laboratory accuracy with a resolution of 0.01 NTU across an extended range of up to 20 NTU (Nephelometric Turbidity Units).

• IP67 Waterproof and Dustproof, easy cleaning and maintenance
• Automatic Push-Button Calibration (4 points) for unprecedented full-range accuracy
• Power-saving feature allows over 1200 measurements
• Large Easy-to-Read Display for optimum viewing of measurements with user-friendly message codes for easy troubleshooting
• Meets Performance Criteria as specified by ISO 7027 (DIN EN 27027) method

Scope of supply: Turbidity meter with 4 calibration standards, 3 empty cuvettes, sturdy carrying case, batteries and instruction manual

Specifications
Turbidity range:	0 to 2000 NTU
Resolution:	0.01 NTU (0 to 19.9 NTU) 0.1 NTU (20.0 to 99.9 NTU) 1 NTU (100 to 2000 NTU)
Accuracy:	± 2 % of reading ± 1 LSD ( 0 to 500 NTU) ± 3 % of reading ± 1 LSD (501 to 2000 NTU)
Repeatability:	± 1 % of reading or ± 0.01 NTU
Calibration Points:	4 points (automatic)
Response Time:	< 6 seconds for full step change
Calibration Standards:	0.02 NTU; 20.0 NTU; 100 NTU; 800 NTU
Light Source:	Infrared-emitting diode (850 nm)
Light Source Life:	> 1,000,000 tests
Power supply:	4 x 1.4 V batteries, > 200 h

Accessories Calibration Kit for Turbidimeter Eutech™ TN-100 Accessories Sample cuvettes for Turbidity meter Eutech™ TN-100

Imhoff pattern, solid grey PVC. Stable design.

Accessories Sedimentation cones, borosilicate glass 3.3 Accessories Sedimentation cone, plastic, SAN Alternative Sedimentation cones, accessory stand, Acrylic/PP Alternative Sedimentation cones, accessory holder Alternative Accessory holders for sedimentation cones with stopcock, PVC

Imhoff pattern, solid grey PVC. Stable design.

Accessories Sedimentation cones, borosilicate glass 3.3 Accessories Sedimentation cone, plastic, SAN Alternative Sedimentation cones, accessory stand, Acrylic/PP Alternative Sedimentation cones, accessory holder

Accessories for measuring instruments MultiLine^® IDS from WTW^® for measuring turbidity parameters. Please order measuring instruments separately.

Accessories Cables AS/IDS for electrodes with plug head

For simultaneous injection of coagulant or reagents in six sample beakers.

Designed for efficiency testing of flocculation or precipitation agents.

• For use in laboratories. Model ET 730 portable
• Illuminated back panel for glare-free observation of the samples
• Models ET 740 and ET 750 with continuously variable stirring speed
• Speed of ET 730 can be adjusted to 20, 40, 50, 100 and 200 min^-1
• Timer feature and digital display
• Height adjustment of the stirring blades during operation
• For beakers with 1000 to 1500 ml volume, tall and low form

Specifications
Speed control
AL30: AL40 + AL50:	20, 40, 50, 100, 120 min-1 10 ... 300 min-1 (stepless)
Timer
AL30: AL40 + AL50:	0 ... 30 minutes (continuous) 0 ... 999 min or 0 ... 99 h (continuous)
Power Supply:	100 ... 240 V, 50/60 Hz

For flocculation tests of water and waste water.

• choice of 2- or 6-bank models
• digital speed display
• two adjustable speed presets
• accurate and reproducible speeds
• diffused base illumination with black background
• accepts beakers up to 1000ml.

Adjustable speed range 25 to 250rpm. Dimensions (H x W x D): 460 x 320 x 220mm (two-bank model) 460 x 750 x 220mm (six-bank model). For 230 V 50 Hz, single phase supplies. Supplied with rotor blades but without beakers.
With BioCote silver based antimicrobial protection.

Accessories Coagulant injector for flocculation testers FJT-200D-6