Tumbling shakers

Filter

 SIL G unmodified standard silica layers for TLC, glass plates/ POLYGRAM®

MACHEREY-NAGEL

Support materials for TLC ready-to-use layers

Glass plates: glass, ~ 1.3 mm thick, high requirements for weight, packaging and storage, ideal torsional strength, high temperature stability, susceptible to breakage, can not be cut with scissors, high resistance against solvents, mineral acids and conc. ammonia, suitability for aqueous detection reagents depends on the phase...

 Chromatography paper / Ion exchange papers

Cytiva

Whatman chromatography papers are the most widely used papers for chromatography worldwide. This acceptance and usage reflects the purity, high quality and consistency of Whatman papers. These qualities are relied upon by chromatographers and essential to successful reproducible chromatography. Whatman chromatography paper media are made from specially selected cotton cellulose. They are rigorously quality controlled for characteristics important to the chromatographer and to ensure uniformity within the grade....

 ADAMANT unmodified standard silica layers for TLC

MACHEREY-NAGEL

Support materials for TLC ready-to-use layers

Glass plates: glass, ~ 1.3 mm thick, high requirements for weight, packaging and storage, ideal torsional strength, high temperature stability, susceptible to breakage, can not be cut with scissors, high resistance against solvents, mineral acids and conc. ammonia, suitability for aqueous detection reagents depends on the phase...

 ALUGRAM® Nano-SIL unmodified Nano-silica layers for HPTLC

MACHEREY-NAGEL

Support materials for TLC ready-to-use layers

Glass plates: glass, ~ 1.3 mm thick, high requirements for weight, packaging and storage, ideal torsional strength, high temperature stability, susceptible to breakage, can not be cut with scissors, high resistance against solvents, mineral acids and conc. ammonia, suitability for aqueous detection reagents depends on the phase...

 Cellulose MN 300, TLC-ready-to-use plates cellulose coated

MACHEREY-NAGEL

The primary field of application is the partition chromatography of polar substances such as amino acids, carboxylic acids or carbohydrates. The TLC-plates are available as glass plates, POLYGRAM ® polyester sheets and ALUGRAM ® aluminium sheets.

  • Fiber length (95 %) 2-20 µm
  • Average degree of polymerization 400-500
  • Specific surface according to Blaine 15000 cm2/g
  • ≤ 20 ppm Fe, 6 ppm Cu, 7 ppm P
  • Dichloromethane extract ≤ 0.25 %
  • Residue on ignition at 850 °C ≤ 1500 ppm
  • Available with or without fluorescent indicator (UV 254)
...

 Aluminium oxide layers for TLC

MACHEREY-NAGEL

Standard, rigid TLC plates in a choice of media, backing materials, and with dimensions as outlined below....

 Chromatography Paper

Hahnemühle

Recommended for chromatographic analysis and preparations.

  • Made from pure linters with an α-cellulose content of > 98%
  • High-performance resolution and wet strength
  • The fibres are oriented in predominantly one direction
  • Thicker papers allow higher sample volumes
  • Lower capillary rises offer higher resolutions
...

 Chromatography paper, reels

Cytiva

Chromatography Paper 1 CHR
The standard chromatography paper. Good resolution for general analytical separations. Pure cellulose. Thickness 0.18mm. Capillary rise (water) 130mm / 30 min.

Chromatography Paper 3MM CHR
Used in electophoresis, in general chemistry and as blotting paper. Pure cellulose. Thickness 0.34mm....

 Chromatography strips

Cytiva

Divided into 12 bands, each of 15mm wide, for parallel separation of 12 samples....

 Nano-Adamant unmodified nano silica layers for HPTLC

MACHEREY-NAGEL

Support materials for TLC ready-to-use layers

Glass plates: glass, ~ 1.3 mm thick, high requirements for weight, packaging and storage, ideal torsional strength, high temperature stability, susceptible to breakage, can not be cut with scissors, high resistance against solvents, mineral acids and conc. ammonia, suitability for aqueous detection reagents depends on the phase...

Add to shopping cart