-
- General laboratory consumables
- Occupational safety, Security
- Analytical measurement and testing
- Stirring, Shaking, Mixing
- Sample preparation
- Distillation, separation, filtration
- Heating and cooling technology
- Liquid Handling
- Vacuum technology, Drying, Dry storage
- Optical instruments and microscopes
- Cleaning and sterilisation
- Environmental-, soil-, water-, food analysis
- Chromatography
- Cleanroom
Antibiotics, antimycotics
Without septa
Screw seals ND15 are made of PP and are supplied without or with fitted septa made of a variety of materials. They have a 15-425 thread, a 9 mm centre hole or are closed.
Screw seals ND18 are made of PP and are supplied with or without fitted septa made of a variety of materials. They have a 18-400 thread, a 12 mm centre hole or are closed....
Kits ND11, crimp neck
The LABSOLUTE® kits ND11 contain shrink-wrapped crimp neck vials ND11 made of clear or amber first hydrolytic class glass and corresponding crimp caps made of clear lacquered aluminum with 5.5 mm centre hole.
Septa with a double-sided PTFE coating show a very low particle formation during penetration....
LLG-2in1 KITs with Screw Neck Vials ND8 (small opening)
2in1 KITs contain 100 vials (1.5 ml) and 100 closures in an orange PP-Box. As both components are always required at the same time, 2in1 KITs are a convenient way to obtain and store all required items for analysis. All advantages of the individual components (cleanroom packaging of the vials, recloseability of the packaging, etc.) remain unchanged....
With silicone / PTFE septa
Screw seals ND15 are made of PP and are supplied without or with fitted septa made of a variety of materials. They have a 15-425 thread, a 9 mm centre hole or are closed.
Screw seals ND18 are made of PP and are supplied with or without fitted septa made of a variety of materials. They have a 18-400 thread, a 12 mm centre hole or are closed....
With silicone / aluminium septa
Crimp and headspace seals ND20 are made of aluminium and are supplied with fitted septa made of a variety of materials. There are the following different types of caps available:
Plain caps with a 10 mm center hole. These caps are suitable for standard applications. They are available in several colours on request....
Septa, 12 mm
The choice of the right septa depends on the application. Many septa are PTFE coated on one side. PTFE is highly resistant against many chemicals and forms an inert border between the sample and the base material of the septa.
The septa's base material has various physical and chemical properties, like temperature resistance, resealability, cleanliness, hardness and thickness....
Standard well plates, 96 positions
All well plates made of PP and sealmats are fully chromatography tested. There are several advantages compared to usual vials and caps. Furthermore, the SBS/ANSI footprint assures compatibility with all well plate capable prep stations and chromatography autosamplers.
Well plates and sealmats are suitable for polar and non-polar solvents, in case of very critical analysis and very low sample concentrations....
22 x 8.4 mm, 4.3 mm centre hole
These caps made of transparent PE are generally used to seal washing bottles of autosamplers, but also for intermediate closure when collecting samples out in the field. They are available in three different dimensions with several septa.
Suitable for the following vials:
7.620 798, 7.615 908, 7.613 328 and 7.613 394....
22 x 9.1 mm, 6.0 mm centre hole
These caps made of transparent PE are generally used to seal washing bottles of autosamplers, but also for intermediate closure when collecting samples out in the field. They are available in three different dimensions with several septa.
Suitable for the following vials:
7.612 175, 7.620 146, 7.621 813, 6.204 710, 7.620 148, 7.620 147, 7.612 926, 7.615 808, 7.616 552 and 7.616 883....
Kits ND13
The LABSOLUTE® kits ND13 contain shrink-wrapped screw vials ND13 made of clear or amber first hydrolytic class glass and corresponding screw caps made of PP.
Septa with a double-sided PTFE coating show a very low particle formation during penetration.
Further kits are available on request....
Block covers, 96 positions
All well plates made of PP and sealmats are fully chromatography tested. There are several advantages compared to usual vials and caps. Furthermore, the SBS/ANSI footprint assures compatibility with all well plate capable prep stations and chromatography autosamplers.
Well plates and sealmats are suitable for polar and non-polar solvents, in case of very critical analysis and very low sample concentrations....
With butyl / PTFE septa
Crimp and headspace seals ND20 are made of aluminium and are supplied with fitted septa made of a variety of materials. There are the following different types of caps available:
Plain caps with a 10 mm center hole. These caps are suitable for standard applications. They are available in several colours on request....
With Viton septa
Crimp and headspace seals ND20 are made of aluminium and are supplied with fitted septa made of a variety of materials. There are the following different types of caps available:
Plain caps with a 10 mm center hole. These caps are suitable for standard applications. They are available in several colours on request....
Crimp seals ND13
Crimp seals ND13 are made of aluminium. They are clear lacquered and have a 6 mm centre hole, a centre tear-off or complete tear-off. They are supplied with fitted septa made of a variety of materials.
The septa made of silicone white/PTFE red are temperature-resistant from -60 °C to 200 °C and have better purity than septa made of natural rubber, butyl or red rubber. However, they have less effective resealability properties and are therefore more suitable for single-injection applications....
Crimping tools
The crimping and decapping tools feature a chemically resistant surface lacquer that has been developed especially for use in the laboratory. Additionally, the crimping tools have hardened closing jaws with a special alloy that guarantee a long service life. The crimping pressure and crimping height of the crimping tools can also be adapted to the design of the crimp neck and septal thickness....
Crimping tool, electronic
Electronic crimpers and decappers provide secure, reproducible crimps and quick and easy removal of aluminium seals. The tools can be used quite mobile because of the built-in rechargeable long life lithium ion battery. Ergonomic design and push button operation eliminates wrist strain especially at large sample series. Adjustable crimp settings make the crimping tool compatible with most vial/seal combinations. The adjusted crimping pressure can be seen easily at any time. A brush-less gear technology guarantees a longer lifetime and less particle emission....
Decapping tool, electronic
Electronic crimpers and decappers provide secure, reproducible crimps and quick and easy removal of aluminium seals. The tools can be used quite mobile because of the built-in rechargeable long life lithium ion battery. Ergonomic design and push button operation eliminates wrist strain especially at large sample series. Adjustable crimp settings make the crimping tool compatible with most vial/seal combinations. The adjusted crimping pressure can be seen easily at any time. A brush-less gear technology guarantees a longer lifetime and less particle emission....
GC Injection Port Septa
The GC septa are universal and longlife. They are delivered in resealable screw neck vials of 1
st hydrolytic class and ready-to-use. You have several advantages using our GC septa:
- Suitable for inlet temperatures up to 400 °C
- Low release of siloxanes
- Good penetration and sealing properties
- No sticking to hot surfaces
LLG-2in1 KITs with Short Thread Vials ND9 (wide opening)
2in1 KITs contain 100 vials (1.5 ml) and 100 closures in an orange PP-Box. As both components are always required at the same time, 2in1 KITs are a convenient way to obtain and store all required items for analysis. All advantages of the individual components (cleanroom packaging of the vials, recloseability of the packaging, etc.) remain unchanged....
Micro-inserts for shell vials
The shell vials made of clear or amber first hydrolytic class glass come in a set with transparent PE plugs. The star-shaped diaphragm in the plug facilitates easy penetration.
Shell vials made of plastic are a shatter-proof alternative to glass vials. They also come with a PE plug.
...
Micro-inserts for vials with wide opening, PP
The micro-inserts made of transparent PP are suitable for
- Short thread vials ND9, with wide opening made of glass or plastic
- Screw neck vials ND10, with wide opening
- Crimp neck vials ND11, with wide opening
- Snap ring vials ND11, with wide opening
- Shell vials, with a nominal volume of 2 ml