Graduated flasks

Silberbrand. To DIN EN ISO 1042. Graduation and inscriptions in highly contrasting white enamel. Caibrated to contain (IN). With PP stoppers.

Clear. Exposure to temperatures up to 121 ºC (autoclaving) will not cause permanently exceeded error limits. Cleaning at temperatures below 60°C is recommended to preserve graduations and inscriptions. Class A tolerance is not affected even after 20 washes and 10 autoclave treatments. (DIN 12681 requires: 10 washes and 3 autoclave treatments). Supplied with batch number and one batch certificate per packing unit. On request, they are also available with an individual certificate, USP individual certificate or DAkkS calibration certificate. Batch and individual certificates can also be downloaded at the supplier"s website.

• DIN 12681 and ISO 6706
• DE-M marking
• With blue printed graduations and inscriptions

For sugar tests in the style of Kohlrausch. Silberbrand.
Tolerance equivalent to class B. Ring marks and inscriptions in highly contrasting white enamel. Calibrated to contain (IN).

UV-absorbing, highly transparent.
For storage of light-sensitive substances.
With ring mark individually calibrated to In".
Class A tolerances according to DIN EN ISO 1042.
With printed lot number and batch certificate. Thermal stress up to 121ºC (autoclaving) does not permanently exceed the tolerance limit. To preserve markings, do not clean at temperatures exceeding 60ºC

Highly transparent PMP. Tolarances Class B acc. to DIN EN ISO 1042. With individually adjusted, red printed graduation and inscriptions and PP standard ground joint stoppers.
The volumetric flasks withstand exposure to temperatures up to 121°C (autoclaving) without permanent loss of tolerance. Recommended cleaning temperature: up to 60°C to preserve printing on the flasks.

All Blaubrand^® volumetric flasks are delivered with batch number and one batch certificate included per pack. Also available with individual works or DAkkS calibration certificate, please enquire. Blaubrand^® volumetric flasks (except wide-neck flasks). Individual and batch works, USP calibration certificates are also available on request. Models with glass stoppers available on request. The batch certificate is also available to download from the supplier"s website.

• DIN EN ISO 1042
• DE-M marking
• Graduations and inscriptions in highly contrasting blue enamel
• Calibrated to contain (IN)

BLAUBRAND^®, DIN EN ISO 1042. Calibrated to contain (TC, IN). DAkkS (former DKD) certificate included. The volumetric flask with 3 marks is used to check the functioning of a dispenser. The mark in the middle shows the nominal volume, the upper and lower marks show the error limits as specified in the table below. If the error limit is exceeded even with repeated measurements, the dispenser is defective. The DAkkS-calibrated volumetric flask does not replace the gravimetric test of the monitoring of measuring instruments according to ISO 8655.

Dispenser head with bottle (1l) complete, ground joint connection: NS 29/32, head: DURAN^® tubing, bottle: DURAN^®

DIN 51 368. For determination of oil content in aqueous oil emulsions (e.g. drilling oil). With NS19/26, hollow glass stoppers. Graduations and inscriptions in highly contrasting white enamel. Capacity 100 ml, tolerance ±0.2 ml. Calibrated to contain (IN).

Subdivisions: 0 to 5 ml : 0.1 ml, tolerance: ±0.1 ml.
Subdivisions: 5 to 30 ml : 0.5 ml, tolerance: ±0.5 ml.

The plain and high quality PUR coating envelops the volumetric flasks like a protective skin. In the event of breakage, the safety coating helps contain the glass fragments. The light blue coating facilitates optical distinction. Frequent autoclaving at 121 °C reduces splintering protection. Suitable for dishwashers (cleaning up to max. 95°C). All Blaubrand^® volumetric flasks are supplied with a batch number and an accompanying batch certificate within the outer packaging. They are also available with individual works or DAkkS (former DKD) calibration certificate on request.

• Blaubrand^® PURprotect
• DIN EN ISO 1042
• DE-M marking
• Ring mark and inscriptions in high contrast blue enamel
• Calibrated to contain (TC, IN)
• With PP stopper

Exposure to temperatures up to 121°C (autoclaving) will not cause tolerance limits to be exceeded ! Cleaning up to max. 60°C is recommended to preserve graduation marks and inscriptions.

• Tolerances according to class A
• DIN EN ISO 5215
• Incl. one batch certificate
• DE-M marking
• Calibrated to contain (TC, In)
• PFA screw cap with moulded sealing ring
• Autoclavable

Volumetric flasks made of polymethylpentene. Highly transparent. Calibrated to contain (IN). DIN EN ISO 1042. Thermal stress up to 121ºC (autoclaving) does not permanently exceed the tolerance limit. To preserve markings, do not clean at temperatures exceeding 60ºC.

Volumetric flasks, Volac FORTUNA^®, USP, with blue graduation. Individually serial-numbered and comply with the accuracies of the USP/ISO/DIN-norms, with single certificate.

Calibrated to contain (IN). With PE stopper and with scratched ring mark. DIN EN ISO 1042. Incl. batch certificate and declaration of conformity.

• With stoppers
• No meniscus
• Calibrated gravimetrically at 20 °C
• Chemically non-absorbent
• Non wetting surface
• Thick walls eliminate distortion
• Food-safe
• Autoclavable

With NS joints. Blue or amber graduation. Conformity approved. Height ±5 mm.

• With stoppers.
• No meniscus
• Calibrated gravimetrically at 20 °C
• Chemically non-absorbent
• Non wetting surface
• Thick walls eliminate distortion
• Food-safe
• Autoclavable to 170 °C

Calibrated to contain (IN). With PE stopper and with scratched ring mark. DIN EN ISO 1042, including batch certificate and certificate of conformity.

IN (TD) calibrated. With dated batch identification. Declaration of conformity acc. to DIN 12600. NS ground with poly stopper. Ring mark and graduation in high contrasting blue enamel. According to DIN EN ISO 1042.
For those products batch calibration reports, which are free of charge, can be generated and printed on www.hirschmannlab.com. Additional single calibration reports or DAkkS certificates (former DKD calibration reports) are available.

The flasks are coated with a special formulated coating that holds the broken parts together in case of breakage. The transparent coating can resist up to 135°C with maximum period of 30 minutes. Coated flasks should not be exposed directly to open flame.

• Conformity certified, with batch certificate
• DIN EN ISO 1042
• Calibrated to contain (IN)

Glass measuring flask with fixed volume doses for the easy and accurate measurement of the required sample volume for respirometric BSB measurements.

Calibrated to contain (IN). With PE stopper and with scratched ring mark. DIN EN ISO 1042. Incl. individual certificate and certificate of conformity.

Calibrated to contain (IN). With PE stopper and with scratched ring mark. DIN EN ISO 1042. Incl. individual certificate and declaration of conformity.