Narrow-mouth bottles

White. Neck opening caps.

Natural or white. Narrow neck.
Please order closures separately.

Natural. Round. Tall, narrow form, leakproof. Easy to handle. Also available with dropper cap or spray cap.
Please order closure separately.

Neck design allows single handed use.
Used for:

• Packaging
• Storage
• Transport

UN-approved.
Type 1: Light cap, white, PP, tamper-evident ring, white, PTFE cup-shaped liner (without figure)
Type 2: Light cap, black, HDPE, tamper-evident ring, black, PTFE cup-shaped liner
Type 3: Bell cap, black, PP, tamper-evident ring, red, cup-shaped PTFE liner
Type 4: Bell cap, red, PP, with degassing membrane, tamper-evident ring, red, cup-shaped, perforated PTFE liner

The aluminium bottle is particularly suited for storing, transport or sending substances and reference samples which have to be stored completely unaltered.

• With UN approval (60 - 5600 ml)
• Pure aluminium (AL99.5 material)
• PP screw cap with internal aluminium seal included

Closure HDPE, white, with PA/PE/PA-insert and tamper evident ring

Immediately indicates unauthorised opening. Perfect for determining whether the cap has been removed.
A) Tamper-evident cap, blue, with conical seal and tamper-evident ring.
B) Tamper-evident cap, red, with PE foam lining and tamper-evident ring.
C) Tamper-evident cap, white/red, with push and turn function, tamper-evident ring, conical seal and degassing membrane.
D) Tamper-evident cap, white/blue, with push and turn function, conical seal and tamper-evident ring.
without Fig.) Tamper-evident cap, red, degassing cap, with conical gasket and degassing membrane.

Blue. For square screw cap bottles (soda-lime glass).
Type H: Narrow-neck, with high form thread
Type K: Wide-necked, with short form thread

Tetragonal design for safe handling. For this series of flasks the thread has been adjusted to the standard glass closure DIN 32.
Please order closure separately.

Grey. Completely opaque. For all photosensitive materials whether liquid or solid.
With holes on the shoulder of the bottle for attaching security seals. Sloping shoulders reduce likelihood of residue deposits.

• Graduated
• With inner closure and cap
• No leaking
• Food-safe

• High level of chemical resistance
• Leakproof

Double-sealing, with insert cap to assure seal tightness. Sloping shoulder reduces residue deposits. Leakproof. Tagging points on shoulder and cap ensures tamper proof closure. With easy grip cap. Food-safe according to EC Regulation 10/2011.

Natural, round. Tall, narrow form, leakproof. Easy to handle. Also available with dropper cap or spray cap.

• High level of chemical resistance
• Leakproof
• Autoclavable (cap must be unscrewed before autoclaving)

For the storage and transport of photosensitive substances. With easy-to-read graduation and large labelling field for easy identification. UV protection up to approx. 500 nm wavelength. 10 ml and 25 ml with specially shaped glass rim for better pouring, thus an additional pouring ring made of plastic is not necessary.

• ISO 4796-1
• USP standard
• Retrace code
• Autoclavable

• ISO 4796-2
• Standard ground joint neck
• With glass stopper
• Hydrolytic class 3

Ideal for transporting toxic waste waters, boiler feed water etc. back to laboratory for analysis as samples can be sealed using wire through the shoulder and cap tags to avoid sample contamination in transit. Conform to DIN 13316 and 168.

• Autoclavable (Remove cap before autoclaving)
• Heavy walled
• Food-safe

Highly transparent. The coating provides scratch, leak and splinter protection and is ideally suited to both the transport and storage of hazardous media or valuable samples. Service temperature limit of the PU plastic coating: -30 °C to 135 °C.

• With screw cap and pouring ring
• Graduated
• UV protection up to approx. 380 nm
• DIN thread
• DIN ISO 4796-1
• Suitable for microwaving
• USP compliant
• Autoclavable

Low particulate PassPort IP2 bottles with PP screw cap. Narrow-mouth bottles with an average of less than 30 particles per ml at 0.3µm and greater. Excellent for storing high-purity chemicals. Product includes a certificate of quality that assures the product has been tested and accepted in accordance with specifications. Low Particulate IP2 Bottles can be used in compliance with the regulations for customers who are designing, assembling and certifying their own combination packaging. Non-sterile. Leakproof.

DURAN^® reagent bottles, DIN thread, ISO 4796. Pressure resistance, as a result of amended shape, in the range of -1 up to +1.5 bar (tested by the TÜV in accordance with DIN EN 1595, with GS mark). Neutral / Type 1 glass in accordance with USP/EP. With Retrace code (Batch identification). Certificate available via the Internet. Autoclavable.
Please order cap and pouring ring separately.

Laboratory bottles without pouring ring and without cap.

Standard screw caps for DIN168 PE bottles.

General-purpose, single-use sample bottle.

• Leakproof
• Autoclavable

Certified to contain less than 20 particles per ml at 0.3µm and larger. Bottles double-bagged under laminar flow hood. Leakproof. Certificate of analysis included in each case. Trace metal concentrations certified to ppb levels. Metals certified to (µg/L) ppb levels <0.20 Hg, <0.5 Be, <1.0 As, Cd, Pb, <2.0 Sb, Se, <5.0 Ag, Co, Cr, Cu, Mn, Th, V, <10 Ba, Ni, Zn, <50 Mg, <75 Al, <100 Ca, Fe, K, Na. Leakproof. LDPE bottle with PP screw cap.