Mills

Ideal for pre and fine comminution of soft to medium-hard as well as fibrous or brittle, tough materials. They are essential for the areas of plastics, textiles, agriculture and forestry, environmental, construction materials, chemistry and foodstuffs. All cutting parts can be removed for cleaning in just a few seconds without tools, unbeatable fast, simple and efficient. Variable rotational speeds, different rotors, various knife geometries and replaceable blades ensure maximum flexibility and durability. For controlling the abrasion properties, the cutting tools are offered in different materials. The optimum airflow ensures fast comminution and secure protection against clogging. The FRITSCH Cyclone seperators (optional) for sample exhaustion enable simple feeding due to the strong airflow, increase throughput, and reduce the thermal load of the samples.

Instruments also available in other voltages.
Funnels, rotors, sieve inserts/sieve cassettes and collecting vessels must be ordered separately.
FRITSCH also offers a Cutting Mill Combination which consists of the Universal Cutting Mill PULVERISETTE 19 and Power Cutting Mill PULVERISETTE 25.
The important effect is that samples with feed particle size of 120 mm max. can be ground to a few 100 µm within a short time and in a single operation. Ordering data on request.
The Universal Cutting Mills PULVERISETTE 19 are also available completely in stainless steel.

NEW: Universal Cutting Mill PULVERISETTE 19 now with variable rotational speed for optimal adjustment of the cutting speed to your sample material
Variable 300-3000 rpm is ideal for fine comminution of dry soft to medium-hard sample materials as well as fibrous materials and plastics.
Variable 50-700 rpm for powerful comminution of hard, tough-elastic and temperature-sensitive samples or an excessively high fine share need to be avoided.

Specifications
Max. feed size:	70 x 80 mm*
Rotation speed:	50 ... 3400 min-1
Sieve inserts:	0.2 ... 20 mm*

Accessories Accessories for cutting mill PULVERISETTE 15 Accessories Accessories for Universal Cutting mills PULVERISETTE 19 Accessories

Application:
The Cyclone Mill TWISTER is specially designed for the processing of foods and feeds for subsequent NIR analysis. The optimized form of rotor and grinding chamber generates an air jet which carries the ground sample through the integrated cyclone into the sample bottle. The air jet prevents the material from heating up, thus preserving the moisture content.

Features:

• Ideal for grinding feeds, grains, forage and other similar products
• 3 controlled speeds
• Cyclone separator with 250 ml collecting bottle for quick extraction of sample
• No cross contamination thanks to easy cleaning
• Convenient operating panel
• Professional industrial design with long lifetime

Specifications:

• Feed size: <10mm
• Final fineness: < 250 µm
• Batch size / feed quantity: <250 ml
• Speed setting: 10000 / 12000 / 14000 rpm
• Dimensions (W x D x H): 449 x 283 x 427mm
• Weight: approx. 14kg
• Power supply: 230 V, 50/60 Hz

Supplied with:
Cyclone Mill TWISTER complete with rotor, grinding ring, sieve inserts (1.0 mm and 2.0 mm), 10 sample bottles 250ml

Ideal for intermittent and continuous fine grinding within the medium particle size range of soft to hard, tough and temperature-sensitive solids in the areas of mining and metallurgy, glass industry, ceramics industry, soil research, rocks and soils.

Max. feed size:	20 mm
Throughput:	up to 150 kg/h
Final fineness:	0.1 ... 12 mm
Supply requirements:	400 V/3~, 50 Hz, 1790 W
Dimensions (W x D x H):	440 x 870 x 400 mm
Net weight:	140 kg

Accessories Accessories for disk mill PULVERISETTE 13 classic line

The PX-MFC 90 D is suitable for dry sample grinding in the laboratory. It"s possible to change the hammer and cutting mill sets.

• The blade grinding attachment is used for processing of dried, stringy and fibrous and grease-free materials. Application: Wood, straw, dried grease-free meat, leather, paper, carbon, synthetics etc.
• The hammer grinding attachment is used for processing of dried, brittle and grease-free materials. Application: Dried grain, dried beans, bones, rock, ceramics etc.
• Sieves 0.2mm up to 6mm diameter
• Safety system prevents start when lid is open
• Powerful three-phase motor
• Milling chamber with interchangeable inserts
• LED display
• Working volume of 300 ml (Funnel volume)
• 1000 Watt, 3-phase motor provides a low noise level during operation, with 230 Volt connection
• Sieves from 0.2 to 6 mm mesh size
• Integrated speed control with LED display for speed and status messages
• Speeds from 50 to 6,000 rpm for maximum grinding efficiency
• The motor cannot be operated when the chamber door is open
• Integrated overheating, overload and rotor blocking protection
• Safety stopper for certain grinding materials

Scope of supply: Mill with Hammer or Cutting Mill sets, 2 mm sieve, tool set, wooden stand with 12 collection tubes

Specifications
Application volume:	Hopper 300ml
Sieves:	0.2, 0.5, 0.8, 1.0, 1.5, 2.0, 3.0, 4.0, 5.0, 6.0mm
Motor input power:	1000W
Speed range:	speeds up to 6000min-1
Drive Dimensions (L x W x H):	251 x 325 x 480mm
Tested to:	IEC/EN 61000-6-2 / EN 61000-6-3 IEC/EN 61010-2-51

Accessories Attachements for Dry Mill POLYMIX® PX-MFC 90 D Accessories Sieves for Dry Mill POLYMIX® PX-MFC 90 D

Alternative  Alternative Grinding balls, sintered corundum Alternative  Alternative  Alternative

Alternative  Alternative  Alternative  Alternative Grinding balls, zirconium oxide Alternative

Accessories Grinding balls, zirconium oxide Accessories Grinding balls, sintered corundum Accessories  Accessories  Accessories  Accessories