-
- General laboratory consumables
- Occupational safety, Security
- Analytical measurement and testing
- Stirring, Shaking, Mixing
- Sample preparation
- Distillation, separation, filtration
- Heating and cooling technology
- Liquid Handling
- Vacuum technology, Drying, Dry storage
- Optical instruments and microscopes
- Cleaning and sterilisation
- Environmental-, soil-, water-, food analysis
- Chromatography
- Cleanroom
Measuring cylinders
Measuring cylinders, SAN, low form, class B, moulded graduations
Short form. Crystal clear. With a raised scale and ring marks at the primary scale points, calibrated IN. Thermal stress up to 60 ºC does not cause tolerance limits to be permanently exceeded. Food-safe product according to regulation (EU) No. 10/2011....
Measuring cylinders, PMP, Class B, moulded graduations
Tall form, with spout, transparent. DIN 12681 and ISO 6706. Calibrated to contain (TC, In). Exposure to temperatures up to 121 °C (autoclaving) will not cause permanent exceeding of tolerance limits! Cleaning temperature below 60 °C is recommended to preserve marks and inscriptions....
Measuring cylinders, Borosilicate glass 3.3, tall form, class B, white graduation
Flawless spout design assures pouring without any drips. Thick and durable polypropylene base reduces the risk of breakage during use and cleaning. Base perfectly fits the cylinder body and can easily be dismantled....
Measuring cylinders, borosilicate glass 3.3, tall form, class A, blue graduated
With spout, tall form. Blaubrand
®. To DIN EN ISO 4788.
DE-M marking with works certified batch number. With spout and hexagonal foot. Graduations and inscriptions in highly contrasting blue enamel. Calibrated to contain (IN). All Blaubrand
® cylinders are delivered with batch number and batch certificate. Also available with individual works, USP, or DAkkS (former DKD) calibration certificate on request. The batch certificate is also available to download from the manufacturer"s website....
Measuring Cylinders, PP, Tall Form, Class B, Moulded Graduations
Conforms to ISO 6706 - 1981 (E), high transparency. Autoclavable at 121 °C for 20 min., permanently heat resistant up to 100 °C. Durable, moulded graduation. Inner surface with very low wettability, therefore no meniscus formation. Food safe....
Measuring cylinders, PMP, class A, KB
Tall form. Highly transparent. DE-M marked. Ring marks at the major graduation points. The conformity certified cylinders are delivered with a batch certificate which includes batch number and the actual determined nominal capacity with indications of the test conditions. Batch number and year of fabrication is printed on each cylinder. The concluding deviations to the nominal capacity are clearly within the required tolerances of class A acc. to DIN 12681 and ISO 6706. Measuring cylinders made of PMP withstand exposure to temperatures up to 121°C (autoclaving) without permanent loss of tolerance. On request also with DAKKS calibration certificate or single certificate....
Measuring cylinders DURAN®, tall form, class A, blue graduations
Calibrated to contain (IN). With spout, main point ring graduations and hexagonal base. DIN EN ISO 4788. Incl. batch certificate and certificate of conformity. The batch certificates can be downloaded from the manufacturer"s website....
Mixing cylinders, borosilicate glass 3.3, tall form, class A, blue graduated
All Blaubrand
® cylinders are supplied with batch number and one batch certificate per packing unit.
- DIN EN ISO 4788
- DE-M marking
- PP stoppers and hexagonal foot
- Graduations and inscriptions in highly contrasting blue enamel
- Calibrated to contain (IN)
Mixing cylinders DURAN®, tall form, class A, blue graduations
Calibrated to contain (IN). With PE stopper, main point ring graduations and hexagonal base. DIN EN ISO 4788. Incl. batch certificate and certificate of conformity. The batch certificates can be downloaded from the manufacturer"s website....
Graduated cylinders, PMP, Class A, tall form
Highly transparent. DE-M marked. With red printed scale and ring marks at the primary scale points, calibrated "In".The lot certificate supplied bears the batch number and the actual nominal value ascertained under the test conditions. The resulting deviations from the nominal value fall well under the allowed tolerances of Class A according to DIN 12681 and ISO 6706. With printed batch number and the year of production. Hexagonal base with bottom studs provides high stability. To preserve markings, do not clean at temperatures exceeding 60 °C. Thus, conditionally autoclavable at 121 °C (2 bar) according to DIN EN 285. For autoclaving we recommend the design with raised graduations. Also available with DAkkS calibration certificate or individual quality certificate....
Measuring Cylinder, DURAN®, class A, Blue Graduation, USP
According to USP error limits.
- With dated batch identification
- Main point ring graduation
- Additional USP batch certificates can be generated and printed at any time free of charge at www.hirschmannlab.com
Measuring cylinders, borosilicate glass 3.3, tall form, class A, blue graduated, incl. USP individual certificate
All Blaubrand
® cylinders are delivered with batch number and batch certificate. The batch certificate is also available to download from the manufacturer"s website.
- BLAUBRAND®
- DIN EN ISO 4788
- DE-M marking
- Graduations and inscriptions in highly contrasting blue enamel
- Calibrated to contain (IN)
- With spout and hexagonal foot
Measuring cylinders, borosilicate glass 3.3, tall form, class A, brown graduated
All Blaubrand ® cylinders are supplied with batch number and an accompanying batch certificate in the original packaging. On request, they are also available with an individual certificate, USP individual certificate, or DAkkS calibration certificate. Batch and individual certificates can also be downloaded at the manufacturer"s website....