Benchtop centrifuges

Universal centrifuge for routine applications. Motorised lid latch enables one finger downward motion for easiest closing and locking of centrifuge lid.

• Intuitive touchscreen
• Auto-Lock™ Rotor exchange: Secure, ergonomic push-button rotor exchange in as little as 3 seconds
• ClickSeal™ Bucket Sealing System: System has glove-friendly, one-handed open/close capability
• SMARTSpin™ Technology: optimises the acceleration and braking process and compensates imbalances
• Front USB port

Microcentrifuge for standard molecular biology applications. The 18-position rotor is specially designed for low to medium volumes in 1.5 / 2.0 ml tubes and Microtainer^®. The compact centrifuge with low access height is characterized by extremely quiet operation.

• 18 place rotor for 1.5 / 2.0 ml tubes
• Lid opens automatically after spinning
• Very small profile, minimal bench space required
• Remarkably silent, even without rotor lid
• Standard, certified aerosol-tight rotor
• Convenient Eppendorf two-dial operation
• rpm/rcf converter
• Short-spin
• The patented compressor technology reduces vibration to a minimum
• Temperature range: 0 °C to 40 °C
• Low access height of 26 cm
• Keeps a constant 4 °C at max. speed
• Fast Temp for rapid pre-cooling of the centrifuge

Including Rotor lid.

FA-45-24-11
Certified aerosol-tight rotor for 24 x 1.5ml /2.0ml microcentrifuge tubes comes standard (max. 20238xg). Perfect for standard applications and centrifugation of biohazardous or radioactive samples. Aerosol-tight rotors are easily identified by a red lid screw.
FA-45-24-11-Special
Certified aerosol-tight rotor for 24 x 1.5ml /2.0ml tubes with special PTFE-coating for improved chemical resistance (e.g., when working with phenol or chloroform) and easy cleaning (max. 20238xg). Aerosol-tight rotors are easily identified by a red lid screw.
F-45-18-11-Kit
Innovative 18-place rotor for miniprep spin columns and 1.5/2.0 ml tubes. Designed with an extra high rim to support open tube lids during centrifugation, no more torn off lids (max. 18111xg).
F-45-32-5-PCR
Rotor for 4 x 8-tube PCR strips or 32 x 0.2ml PCR tubes quickly knocks down liquids and properly supports thin-walled PCR tubes (max. 18615 xg).

Microcentrifuge with exceptional versatility. These centrifuges are used with e.g. rotors for Eppendorf Tubes^® and PCR strips, rotors for microplates and 15/50 ml conical tubes, as well as a 48-place rotor, a 16-place rotor for Eppendorf Tubes^® 5.0 ml and a swing-out rotor (24 x 1.5 / 2.0 ml).

Microcentrifuge 5430

• Choice of 8 different rotors, e.g. MTP rotor, Falcon rotor for max. versatility
• 48 place centrifuge for 1.5ml/2.0ml micro test tubes, 6 x 50ml Falcon^® tubes or 2 x MTP plates
• Unique 30 130xg
• Automatic rotor recognition
• Stores up to 50 routine programs
• Menu guided operation in 4 different languages
• Automatic lid opening following application sequence (only 5430)

• Temp. range: -11°C to +40°C
• +4°C at max. speed with all rotors
• Continues cooling after the centrifugation process
• Fast Temp for achieving required temperature in shortest possible time
• Fast Temp pro for having the centrifuge refrigerated and ready-for-use at your desired pre-set time

Operation can be timed, continuous or momentary, using the "quick" button. Vibration free operation is ensured by an isolation system. In the event of a significant imbalance, operation of the centrifuge is automatically stopped. Deceleration at the end of a run is very quick, but will not disrupt samples. Supplied with a uniquely designed 24 x 1.5 ml/2.0 ml rotor that allows easy access to the tops of the sample tubes. Individual tube slots in the solid aluminum rotor support tubes along their length and contain the sample in the event of tube failure. The rotor is seated on a tapered shaft which facilitates easy removal for cleaning and autoclaving.

Adapters for smaller tubes and PCR strips -please oder separately.

The Spectrafuge^™ 24D combines innovations such as a unique, easy access rotor, exclusive multi-flow air cooling system and high performance drive with a digital microprocessor that precisely regulates operation. Parameters are selected with two "smart" knobs and values are shown on large, easy to read, LED displays. Speed can be set and displayed in rpm or g-force. Runs can be set timed, continuous or momentary.
The unique design of the 24-place rotor allows easy access to the tops of the tubes. An optional StripSpin™ adapter fits onto the rotor for spinning 0.2ml tubes and strips. A powerful, brushless motor quickly accelerates the rotor to set speed. Air enters the centrifuge through vents on the back of the housing and it is circulated in multiple directions to maximize cooling. The result is a cool running microcentrifuge that keeps samples close to ambient temperature, even during extended runs at maximum speed. For samples that require below ambient temperatures, the Spectrafuge 24D may be used in a cold room.

The Z 216 M and Z 216 MK are setting new standards in this centrifuge class. Capable of centrifuging up to 44 x 1,5 / 2,0 ml at each run. Due to their compact design and quiet running properties they are fitting perfectly in their working area. The powerful refrigeration system of Z 216 MK keeps samples at temperatures as low as 4°C during a continuous run at 20000 xg.

• Maintenance-free induction drive
• Microprocessor with large LCD Display
• Motor driven lid lock
• Active imbalance-identification and cut off
• Standstill cooling
• Audible signal at the end of each run
• Rapid acceleration and deceleration (see rotor data)
• Lowest sample temperature 4°C at 20000xg
• Noise level < 60 dBA at 20000xg
• Extremely compact with a space saving footprint
• Quick access to samples with a snap on lid
• Aerosol tight rotor option
• Manufactured according to international safety regulations, i.e. IEC 61010
• Distinct control panel

The Heraeus™ Pico™ & Fresco™ microcentrifuges from Thermo combine productivity, versatility, safety and convenience in a compact, easy to-use lab instrument. Available in 17000 x g and 21000 x g models, both the ventilated Heraeus Pico and the refrigerated Heraeus Fresco offer a range of rotors to support micro-volume protocols such as nucleic acid preparation, protein isolation and reaction set-up. Featuring a new 24 x 2ml rotor with a biocontainment lid certified by CAMR.

At the same time the Heraeus pico and Fresco convince with a high measure of user comfort: the improved control panel with clear display permits a simple programming during the equipment allows an easy cleaning itself. The new cap is arranged with an audible "clicks" and saftey locked for the complete centrifugatuion expiration. Particularly developed for laboratories,which use the 0.2ml to 2.0ml micro tubes, these micro centrifuges offer maximum productivity and user comfort with capacities from 12 to 48 tubes.

• High Productivity - Fast acceleration and deceleration time (12 seconds) means you can process more samples in less time
• User-friendly - fast and simple changes of rotors and tubes by a new user friendly Design
• Safe - singular "Click CLOSE" - cap system for aerosol-tight inclusion of the biological substances guarantees the security of the user
• Comfortable - simple fast attitude of the run parameters and a clearly arranged display
• Multifunctional - selecting it from a broad pallet of rotors, which includes a Biocontainment rotor, a PCR rotor and a micro litre rotor with high sample capacity

Adapter for the following fixed-angle rotors:
F-45-12-11
F-45-18-11
F-45-24-11
F-45-30-11
FA-45-24-11
FA-45-30-11
FA-45-48-11
FA-30 x 2
FA-48 x 2

General purpose centrifuge for routine applications.Motorised lid latch enables one finger downward motion for easiest closing and locking of centrifuge lid.

• Intuitive full color touch screen
• Up to 100 program storage
• Display of set and actual parameters
• Easily adjust speed, time and temperature, even during the run
• Auto-Lock™ III rotor system: Secure, ergonomic push-button rotor exchange
• ClickSeal™ Bucket Sealing System: System has glove-friendly, one-handed open/close capability
• SMARTSpin™ Technology: optimises the acceleration and braking process and compensates imbalances

Swing-out rotor A-4-38 (centre of illustration) accelerates up to four 85 ml round buckets to approximately 3000 xg. Max. speed 4400 rpm. Square buckets for up to 24 x 15 ml vessels are offered for applications with high throughputs.
The fixed angle rotor F-35-30-17 is available in two different versions with a capacity up to 30 x 15 ml.
The simple swing out rotor A-8-17 for 8 x Falcon^® tubes completes the range.

Rotor lids included.

FA-45-48-11: Standard rotor for 48 x 1.5/2.0ml tubes, aerosol-tight, Eppendorf QuickLock^® closure
F-45-48-11: Rotor for 48 x 1.5/2.0ml tubes
FA-45-16-17: Fixed angle rotor for 16 x Eppendorf Tubes^® 5.0 ml, aerosol-tight, Eppendorf QuickLock^® closure
FA-45-30-11: Fixed angle rotor, 30 x 1.5/2.0ml tubes, incl. aluminium lid, coated, aerosol-tight. Rotor is autoclavable
F-45-30-11: Fixed angle rotor, 30 x 1.5/2.0ml tubes, coated, aerosol-tight. Rotor is autoclavable
FA-45-24-11-Kit: Kit-Rotor for 24 Spin Columns or 1.5/2.0ml tubes, aerosol-tight. Rotor for centrifugation with open tube lids
F-35-6-30: Falcon^®rotor for 6 x 15/50ml tubes, incl. adapter
A-2-MTP: Swing out rotor for MTP or PCR plates, incl. 2 x MTP buckets, max. loading height 29mm
S-24-11-AT: Swing out rotor for 24 x 1.5/2.0 ml tubes, aerosol-tight

Swing-out and fixed-angle rotors for the centrifuges 5804, 5804 R, 5810 and 5810 R.

• Aluminium rotors
• Resistant to chemicals and corrosion
• Eppendorf QuickLock^® caps and QuickLock^® lids
• Many possible applications due to different adapters

• Incl. 2 buckets
• Various combinations of stacked plates can be centrifuged
• Max. loading height 89 mm
• Simultaneous processing of up to 192 samples
• Max. speed 2250 x g (max. 3700 rpm)
• Rotors and carriers are autoclavable (20 mins. at 121 °C)

• Incl. 2 buckets, 2 aerosol-tight caps and 2 plate carriers
• Various combinations of stacked plates can be centrifuged
• Max. loading height 67 mm (89 mm without caps)
• Max. speed 3486 x g (max. 4500 rpm)
• Rotors and carriers are autoclavable (121 °C, 20 min.)

Multipurpose centrifuge for the dairy laboratory.

• Timer 0 to 255 minutes
• Automatic brake
• Heating (option) with variable temperature setting up to 65 °C (1200 W)
• Microprocessor control with an LED display to show speed, run time, temperature and error messages
• Cover lock
• Unbalance cut-off
• Emergency release

• Gerber Butyrometers (350 x g )
• Solubility in milk powder (164 x g)
• Extraction tubes Roese-Gottlieb/Mojonnier (80 x g)
• 1 variable speed range (200 to 1100 rpm), on request

Swing-out and fixed-angle rotors for the centrifuges 5804, 5804 R, 5810 and 5810 R.

• Aluminium rotors
• Resistant to chemicals and corrosion
• Eppendorf QuickLock^® caps and QuickLock^® lids
• Many possible applications due to different adapters

• Max. speed 3234 x g (max. 4200 rpm)
• Buckets and adapters are autoclavable (20 mins. at 121 °C)