Sample containers

Ideal for liquid specimen collection, transportation and storage.

• Ideally suited for liquid histological samples
• Container made of non-cytotoxic polypropylene
• Very solid quality
• Top and bottom gripping assures easy opening and closing when wearing gloves
• Half-transparency containers
• With graduation
• With label
• Leak proof

Alternative LLG-Transport tubes, PP, with screw cap

Transparent, pressure-resistant and unbreakable sample cup, ideal for collecting and storing samples of all types. Can be ordered with and without screw cap.

• Graduated
• Solid and stable
• Writing field on the cup and labeling area on the lid
• Wide opening for easy and safe filling
• Fluid tight sealing screw cap with thread

Accessories Screw cap, HDPE for Multi-purpose beakers

Whirl-Pak^® bags are sterile polyethylene laboratory sample bags used to transport samples for biological testing and other applications. Available with or without write-on label. With integrated wire closing system. Temperature range: -210 to 82 °C.

Easy sample handling due to the specially gusseted bottom which flattens out when the sample is placed inside, allowing the bag to stand up on its own. It works just like a bottle or beaker, however it cost less, is shatterproof and uses a fraction of the storage space. The integrated wire closing system ensures the tightness of the sample bag. With write-on label for clean and easy identification. Temperature range: -210 to 82 °C.

Transparent. For samples from chemistry, pharmaceutical, food technology applications etc.

• Sterile, RNase, DNase and pyrogen-free
• Leakproof

Type A: Without write-on panel
Type B: With write-on panel.

• Sterile, solid bags for the homogenisation of liquids and solids
• With and without labelling strips

Scaled sampling tube manufactured in a clean room specially designed for disposable use. Due to the blue colour, it is also perfect for use in the food, animal feed and pharmaceutical industries. After sampling, the container can be closed and is leakproof. DispoDipper is completely manufactured in one piece and can be used for sampling and subsequent transport of the sample in one device. In this way, cross-contamination or sample impurities are almost impossible. For sampling, first remove the cover at the predetermined breaking point. Then take the sample with the sample container and close it securely. After sampling, the handle at the predetermined breaking point can be detached from the sample container. This allows for easy and space-saving transport of the sample.

• Individually packaged and optionally sterilised by gamma rays (SteriPlast^®)
• Production and packaging according to clean room class 7
• Complies with EU food requirements and FDA regulations

All the bags use the same filter material. These special bags contain a third layer of finely perforated polyethylene, which filters out the solids in the sample when used in a homogeniser blender. This allows for easy pipetting of the sample. The hole diameter in the filter layer measures 0.33 mm and there are 285 holes per square cm. The filter is sealed into the perimeter of the bag on the sides and bottom, allowing the sample to be placed in the bag on either side. The liquid will transfer through the filter, but the solids stay on one side. With write-on lable. Temperature range: -210 to 82 °C.

A new, easy-to-handle sample taking system for manual sampling.
General purpose thanks to

• quick and easy exchange of the sample taking equipment
• simple change by pressing the spring mechanism
• extremely strong fiber glass telescopic poles, non-corrosive
• for up to 20 different sample taking devices
• four different fiber glass telescopic poles extensible from 1.5m up to 6.00m in length

Please order telescopic poles separately.
Especially suitable for mud-sampling. Stainless steel beaker with reinforced rim. With adjustable click-in angle from 0 to 180°.

Accessories Fiber glass telescopic pole INGENIOUS Alternative Angled sample beaker, stainless steel Alternative Angled sample beaker, PP Alternative Pendulum beaker, stainless steel

• Stand-up bag with bottom gusset
• Aluminium composite film made of PET, SPE, AL, SPE and PE (5-layer structure)
• Very good barrier properties against water vapor and oxygen
• Opaque
• Protection against the influence of UV radiation
• Temperature range: -40 °C ... 90 °C

The precise grinding of the glass plate and the lower part of the vessel enables a tight closure.

Screw cap for thread GL 45 made of PPS, freely turnable distributor body made of PTFE with female threads UNF ¼" 28 G for connecting capillary tubing (O. D. 3.2 mm) or a b.safe air valve with service life indicator.

Scope of supply:
Cap A: 2 x connections, 1 x fitting (PFA), 1 x air valve
Cap B: 3 x connections, 2 x fittings (PFA), 1 x blind fitting (PFA), 1 x air valve
Cap C: 4 x connections, 3 x fittings (PFA), 2 x blind fittings (PFA), 1 x air valve
Cap D: 5 x connections, 4 x fittings (PFA), 3 x blind fittings (PFA), 1 x air valve
Cap E: 7 x connections, 6 x fittings (PFA), 5 x blind fittings (PFA), 1 x air valve

Accessories  Accessories  Accessories Air valves, PP

Diese Beutel wurde speziell zum Sammeln von chlorierten Wasserproben z. B. zum Testen auf Legionellen entwickelt. In jedem sterilen Beutel befindet sich eine ungiftige, nicht nutritive Tablette, die aktives Natriumthiosulfat enthält, um das Chlor beim Probenehmen zu neutralisieren. Der Beutel ist von der EPA zugelassen, ersetzt andere Probenbehälter und spart Zeit, Lagerplatz, Energie und Entsorgungskosten. Mit Beschriftungsstreifen, leicht und sauber zu beschriften. Temperaturbereich: -210 bis 82 °C.

Hergestellt aus hochtransparentem PP ohne Zusatzstoffe. Ultradünnes PP gewährleistet eine optimale Wärmeübertragung während der Amplifikation. Umfassende Thermocycler-Kompatibilität. Reaktionsgefäße mit flachem Deckel für die Real Time PCR / quantitative PCR verfügen über mattierte Deckel zu leichteren Beschriftung.

Eigenschaften & Vorteile:

• Verpackungskennzeichnung mit Produktionssymbolen zur einfacheren Identifikation und Einlagerung
• Frei von nachweisbarer DNase, RNase und humaner DNA
• Frei von nachweisbaren Endotoxinen

Whirl-Pak® bags are sterile polyethylene laboratory sample bags used to transport samples for biological testing and other applications.
Temperature range -210 to 82 °C.
Made of black pigmented PE-film providing maximum protection for samples that are sensitive to light.

Sponges and swabs designed specifically for microbial surface sampling. 3M™ Sponge-Sticks are available in wet or dry formats, to fit many applications. The 1.5" x 3" 3M™ Sponge-Stick allows sampling without directly handling the sponge.

These gamma sterilised bottles are specially designed for taking, handling, transporting and storing water samples. Manufactured either as clear or amber colour from polypropylene. Clear bottles are manufactured from glass-like transparent special grade polypropylene. Amber bottles are manufactured from an amber coloured clear polypropylene which is higly translucent but still preventing the UV light penetrating inside the bottle. Square body form offers easy handling, and optimum space saving solutions during storage period. Wide bottle neck (GL 50) provides easy filling and pouring. Cap is made from PE with self sealing lock with integral security ring. Unique cap inner design ensures hermetical closure and guarantees an excellent leak and contamination proof bottle. Embossed graduation ( presicion of ±2% ) on side wall enables volume verifications. Each bottle is labelled specifying e.g. sample and source descriptions, code and lot numbers and expiry date.
Bottles with liquid sodium thiosulfate (20 mg/lt - acc to ISO/FIS 19458:2006 ) are ideal to analyse water meant for human consumption, swimming pools, and any other water where chlorine may modify the composition of the sample.
Empty bottles, without sodium thiosulfate ; ideal to sample water for physical and chemical analysis, as well as for other sample requirements that demands sterile bottles.

• With white screw caps made of PP
• Liner Material metal foil
• Made of WHEATON 180 low potassium borosilicate glass
• High ultraviolet transmission

For environmental surface sampling of work areas and equipment. The natural cellulose dry sponge is free of bactericides and has been tested to be non-inhibitory.

Alternative Sample Bags Whirl-Pak®, PE with sponge, hydrated, PUR

• Flat bag with open bottom, sealable
• Aluminium composite film made of PET, SPE, AL, SPE and PE (5-layer structure)
• Opaque
• 2 bags of 50 pieces

PS sample cup for analyzers.

Accessories Lids for Sample Cups, PE

White, high-impact polystyrene plastic.

• Individually sealed and sterilised in a polyethylene bag
• Long handle increases the distance between the hand and the sample
• Scoop is suitable for use as weighing boat
• Food-safe
• Lot stamped for accurate lot tracing
• Shipped with a Certificate of Processing for Sterilization
• Made from FDA grade materials

Screw cap made of PE or metal.

• Endotoxin free to levels <0.01E U/m
• With printed label
• Leak-proof
• Sterilized by gamma irradiation
• Lot number on each container aids full traceability
• Other sizes on request

The Dräger-Tubes^® measuring system is the safe method for measuring pollutants in the soil, water and air. More than 500 substances can be measured in varying concentrations. The long-established principle of Dräger-Tubes^® is still the same. A defined volume of gas/air must be pumped through the sampling tube. This can be achieved by using the Accuro^® gas pump. On contact with the substance under test the reagent system contained in the tube reacts and displays a colour. The strength of the concentration of the substance is shown by the length of the colour band displayed and can be read directly from the scale. The Dräger-Tubes^® sampling system provides accuracy, efficiency, quick and easy handling. Over 250 tubes are available on request for all substances and measuring fields. Further sampling devices, diffusion tubes for long-term measurements as well as sampling systems with activated carbon tubes, ORSA collector and TDS thermodesorption tubes are also available.

Alternative Dräger-Tubes® Alternative Dräger-Tubes®

The sloping, curved or flat lids can be opened or closed individually. This minimizes the risk of cross-contamination, helps prevent pipetting errors and facilitates sample processing. They are made of pure PP without additives. In order to ensure homogeneous temperature transfer, the wall thickness is uniform for all of them.

Features & Benefits:

• Universal fit for almost all PCR systems
• Free of detectable DNase, RNase and human DNA