-
- General laboratory consumables
- Occupational safety, Security
- Analytical measurement and testing
- Stirring, Shaking, Mixing
- Sample preparation
- Distillation, separation, filtration
- Heating and cooling technology
- Liquid Handling
- Vacuum technology, Drying, Dry storage
- Optical instruments and Microscopes
- Cleaning and sterilisation
- Environmental-, soil-, water-, food analysis
- Chromatography
- Cleanroom
Heating mantles
Standard heating mantles series KM-G
![A click opens this product segment](/lab/shop/pic/150x150/owweb/s7311_1.jpg)
LabHEAT ®-Heating mantles for flasks, round bottom. Flexible glass yarn heating element, outer jacket in glass silk, with diam. 60mm bottom out-let from 500ml, max. heating element temperature 450 °C, 1.5 m power supply (earthed) cable with heating-zone switch and RCD (residual current detection), nominal voltage 230 V AC....
Power controller KM-L116 for heating mantles
![A click opens this product segment](/lab/shop/pic/150x150/owweb/9642660_3.jpg)
LabHEAT ®-regulator for heating mantles. Electromechanical; infinitely variable control over power outlet; plastic housing (H x W x D) 55 x 65 x 120 mm; switching power max. 2990 W (13 A); 1.5 m power supply (earthed) cable with plug....
Electronic heating mantles, EM series
![A click opens this product segment](/lab/shop/pic/150x150/owweb/s4365_2.jpg)
Polypropylene outer case is resilient and chemically resistant. Highly efficient in heating up to a maximum element temperature of 450 °C. The flexible heating element is suspended in a thermal insulating cartridge to provide maximum heat transfer with minimum risk of flask breakage. Even at full power output, the exterior remains "cool-to-touch" due to good heating element insulation. All heating mantles have support clamp for rods of up to 12 mm diameter, and are double fused, with earth (ground) screen to protect the user from electric shocks. Available as 220-240 V 50/60 Hz models; spare heater cartridges are available on request....
Metal-cased heating mantles series KM-ME, with controller
![A click opens this product segment](/lab/shop/pic/150x150/owweb/9642520_4.jpg)
LabHEAT ® - Heating mantles for flasks, round bottom. Flexible glass yarn heating element in plastic coated, chemical-resistant metal housing with built-in power-on and heating zone switch, in addition equipped with a controller which allows a continuous adjustment of the heater power; max. heating element temperature 450°C; 1.5m power supply (earthed) cable and RCD (residual current detection); nominal voltage 230V AC....
Laboratory regulator series KM-RX1000
![A click opens this product segment](/lab/shop/pic/150x150/owweb/9642654_1.jpg)
LabHEAT ®-regulator. Freely configurable electronical temperature regulator with two displays indicating the desired and actual values. PID self-optimisation, with ramp function, USB port, for external configuration. Pt-100 or thermocouples for temperatures up to 1200 °C, metal housing (H x W x D) 75 x 205 x 140 mm with fixed support clamp, switching power max. 2300 W (10A), 1.5m power supply (earthed) cable with plug. Nominal voltage 230 V AC....
Electronic multi-size heating mantles, spill-proof, EMX series
![A click opens this product segment](/lab/shop/pic/150x150/owweb/s4366_2.jpg)
Solid stainless steel liner, which protects against fluid spills and is easy to clean, with central aperture to accommodate round-bottom and pear-shaped flask and 60° funnels. Polypropylene outer case is resilient and chemically- resistant. Highly efficient in heating up to an element temperature of 450 °C. Even at full power output, the exterior remains "cool-to-touch" due to good heating element insulation. All heating mantles have support clamp for rods of up to 12 mm diameter, and are double fused, with earth (ground) screen to protect the user from electric shocks. Available as 220-240 V 50/60 Hz models; spare heater cartridges are available on request....
Electronic multi-size heating mantles, V-shaped, EMV series
![A click opens this product segment](/lab/shop/pic/150x150/owweb/s4367_1.jpg)
Solid, with mesh stainless steel liner, which protects against fluid spills, with central aperture to accommodate round-bottom and pear-shaped flask and 60° funnels. Polypropylene outer case is resilient and chemically- resistant. Highly efficient in heating up to a maximum element temperature of 450°C. Even at full power output, the exterior remains "cool-to-touch" due to good heating element insulation. All heating mantles have support clamp for rods of up to 12mm diameter, and are double fused, with earth (ground) screen to protect the user from electric shocks. Available as 220-240 V 50/60 Hz models; spare heater cartridges are available on request....
Electronic stirrer mantles SHM-200 series
![A click opens this product segment](/lab/shop/pic/150x150/owweb/s4368_1.jpg)
Built-in adjustable heater control up to an element temperature of 450°C and magnetic stirring control up to approx. 520rpm with auto-reverse facility and automatic stirrer bar trap; the stirrer unit has an independent power supply. Polypropylene outer case is resilient and chemically-resistant. Even at full power output, the exterior remains ""cool-to-touch"" due to good heating element insulation. All heating mantles have support clamp for rods of up to 12mm diameter, and are double fused, with earth (ground) screen to protect the user from electric shocks. Available as 220-240 V 50/60 Hz models; spare heater cartridges are available on request....
Glass fibre-insulated heating cables series KM-HC-G
![A click opens this product segment](/lab/shop/pic/150x150/owweb/9642750_2.jpg)
LabHEAT ®-Heating cables. No protection against ingress of water; glass fibre insulation without protective braiding; outer diameters dia. 3.5 to 4.5mm; min. bending radius > 5mm; max. heating element temperature 450°C; preterminated with 2 x 1.5m cold end; nominal voltage 230V AC....
Glass fibre-insulated heating tapes series KM-HT-BS30
![A click opens this product segment](/lab/shop/pic/150x150/owweb/9642720_3.jpg)
LabHEAT
®-Heating tapes. Very flexible. No protection against ingress of water. With inner metal protective braiding and glass fibre insulation. Max. heating element temperature: 450 °C. With power cable (1.0 m) for fixed connection, nominal voltage: 230 V AC.
Dimensions: 30 x 5 mm....
Heating mantles Electrothermal® CMUV
![A click opens this product segment](/lab/shop/pic/150x150/owweb/s10479_2.jpg)
Heating mantle has a "V"-shaped design for large, pear-shaped and round-bottom flasks. The bottom opening allows 60° funnels of various diameters to be accommodated. Coiled heating element provides optimal heat transfer. Control heat throughout the mantle using three separate electrical circuits (top, middle, and bottom), each controlled with its own dial switch....
Heating tapes, fibre glass, KM-HT-G series
![A click opens this product segment](/lab/shop/pic/150x150/owweb/9642710_1.jpg)
Not moisture-resistant. With fibre glass protective braiding. Max. surface temperature 450°C. With nickel-plated copper external braiding as protective earth conductor, 1.0 metre long mains connection cable for permanent connection to a fused 230 V outlet. Power loading approximately 200 W/m, 230 V a.c. Tape dimensions: 12 x 8 mm. Lengths as indicated....
Metal-cased heating mantles series KM-M, without controller
![A click opens this product segment](/lab/shop/pic/150x150/owweb/9642500_1.jpg)
LabHEAT ® - Heating mantles for flasks, round bottom. Flexible glass yarn heating element in plastic coated, chemical-resistant metal housing with built-in power-on and heating zone switch; max. heating element temperature 450°C; 1.5m power supply (earthed) cable and RCD (residual current detection); nominal voltage 230V AC....
Multi-size Heating Mantles, series KM-MPE for different sized round bottom flasks
![A click opens this product segment](/lab/shop/pic/150x150/owweb/9642540_4.jpg)
LabHEAT ®-Heating mantles for flasks, round bottom. Designed and technically identical to series KM-ME, but can be used for round flasks of three different sizes, max. heating element temperature 450°C; 1.5m power supply (earthed) cable and RCD (residual current detection); nominal voltage 230V AC also equipped with a controller which allows a continuous adjustment of power....
Power controller, Voltron 20
![A click opens this product segment](/lab/shop/pic/150x150/owweb/9725094_1.jpg)
Alternating current resistance controller with interference suppressor for variable, no-power-loss control of hotplates, heating tapes, soldering irons, light bulbs, infrared radiators etc., control range 25V to 225V. With single throw on/off potentiometer and shielded fuse holder for safe fuse replacement away from the internal circuit. Fitted with interference suppressor in accordance with EN standard....
Standard heating mantles series KM-GH
![A click opens this product segment](/lab/shop/pic/150x150/owweb/s7348_1.jpg)
LabHEAT ®-Heating mantles for flasks, round bottom. Designed identical to series KM-G, but the heating element is made of heat-resistant quartz yarn and permits a maximum temperature up to 900 °C; 1.5 m power supply (earthed) cable with heating-zone switch and RCD (residual current detection); nominal voltage 230 V AC....
Stirring heating mantles LabHEAT® KM-MER series
![A click opens this product segment](/lab/shop/pic/150x150/owweb/9642545_3.jpg)
LabHEAT ® - Heating mantles for flasks, round bottom. Designed and technical identical to series KM-ME, but in addition equipped with a magnetic stirrer; rotational frequency up to 1600rpm max. heating element temperature 450°C, 1.5m power supply (earthed) cable and RCD (residual current detection); nominal voltage 230V AC....
Temperature sensors for Laboratory regulator series KM-RX
![A click opens this product segment](/lab/shop/pic/150x150/owweb/s7354_1.jpg)
LabHEAT
®-sensors. Suitable for temperature control and KM-KM-RX1001 RX1004 with permanently attached cable, with or without diode plug.
KM-TP2: Pt100, up to 400 °C, sheated element V2A, dia. 4 x 50 mm,
KM-TPG: Pt100, up to 250 °C, glass tube, dia. 6 x 40 0mm,
KM-TNS: NiCr-Ni, up to 1200 °C, rod sensor in Inconell, dia. 1.5 x 300 mm...
Insulating Mantles KM-IRU / KM-IRB series
Insulating mantles for single and double neck round bottom flasks, heated insulating mantles with glass yarn element (max. 450 °C) and grounding.
- Made by hand work
- Aluminium coated outer jacket
- Thermally insulated
- To prevent heat losses occuring at the upper flask halves
Metal-cased heating mantles series KM-MHB
![A click opens this product segment](/lab/shop/pic/150x150/owweb/s4561_2.jpg)
LabHEAT ® - Heating mantles for high form beakers. Flexible glass yarn heating element in plastic coated, chemical-resistant metal housing, with built-in power-on and heating zone switch, max. heating element temperature 450 °C; 1.5 m power supply (earthed) cable and RCD (residual current detection); nominal voltage 230 V AC....
Metal-cased heating mantles series KM-MNB
![A click opens this product segment](/lab/shop/pic/150x150/owweb/s4559_1.jpg)
LabHEAT ® - Heating mantles for low form beakers. Flexible glass yarn heating element in plastic coated, chemical-resistant metal housing, with built-in power-on and heating zone switch, max. heating element temperature 450 °C; 1.5 m power supply (earthed) cable and RCD (residual current detection); nominal voltage 230 V AC....