Samplers, Liquids

For point sampling of liquids of varying viscosity. Media containing particles can also be sampled. Container diameter: 55 mm.

• Easy cleaning thanks to unscrewable cup
• Food-safe
• Autoclavable

Without tip. V2A stainless steel. Sterilizable. GMP/FDA compliant. Specially for collecting small amounts of powder. Volumes of 0.2, 0.5, 1, 2, 5 and 10 ml can be taken simply, quickly and cleanly from different depths of sacks or containers. The Micro-Sampler tips are interchangeable so that tips with different volumes can be used.

Accessories Accessories for Micro-Sampler

Natural, with white polypropylene closure. Good chemical resistance, leak-proof and pre-sterilized. Manufactured according to the quality requirements of ISO 13485:2003. Bottles and their closures meet the requirements of US standard 21CFR177.1520 for use in the food and beverage industry, USP Class VI.

With Novartos Multi double and triple zone sampling, multi-point samples can be taken from multiple predefined sample zones. Depending on the length, four, seven or nine collection chambers are equipped with two or three sample inserts each. It is possible to withdraw a multiple sample without inserting the lance repeatedly into the bulk material. Mixing is mainly prevented in this way. Withdrawal of a sample can be prevented at certain points with blind inserts (0.0 ml).

• Stainless steel V4A (1.4404 / 1.4571)
• Sampling according to FDA guidelines for unit-dose sampling
• The sample inserts fit precisely and can easily be replaced (please order separately)
• The insertion depths can easily be read from the laser-engraved depth scale
• Groove-free and electro-polished
• Food-safe
• Autoclavable

Alternative Zone samplers, Multi/All-layer/Jumbo/Uno, steel V4A or aluminium Alternative Zone samplers, Novartos Uno, stainless steel V4A

With the Novartos Uno sampler, target point samples can be taken from a predefined sample zone. Therefore the sample chambers are fitted with two or three sample inserts. It is possible to withdraw a double- or triple-sample without inserting the lance repeatedly into the bulk material. Mixing is mainly prevented in this way.

• Stainless steel V4A (1.4404 / 1.4571)
• Sampling according to FDA guidelines for Unit-Dose-Sampling
• Precision-fit, easily interchangeable sample inserts (please order separately)
• The insertion depths can easily be read from the laser-engraved depth scale
• Groove-free and electro-polished
• Food-safe
• Autoclavable

Alternative Zone samplers, Multi/All-layer/Jumbo/Uno, steel V4A or aluminium Alternative Zone samplers, Novartos Multi, stainless steel V4A

Beaker with reinforced rim and spout. PTFE handle with steel core. Optional extension rod for increased handle length (Extension rod, length 600 mm).

Accessories Accessories for sampling dippers

Facilitate sample collection to reduce risk of cross-contamination.

• Individually wrapped
• Handle neatly snaps off after sample collection
• Sterilized by gamma radiation

Operation with compressed air or inert gas (e.g. nitrogen), which creates an overpressure in the container. Hazardous media can be safely dispensed and accurately metered using the stopcock.

• For UN tanks and barrels (test pressure at least 150 kpa)
• Variable inlet pressure between 3 and max. 10 bar
• No escape of vapours containing solvents due to stopcocks
• Wetted parts are made of stainless steel and PTFE
• Transportable or permanently mountable

Caution! When working with combustible liquids, the tank, pump and pressure regulating unit must be earthed! Use antistatic set in addition for pump!

Scope of supply: Transport stand, key, grounding cable, pressure regulation unit, connecting tubing, adapter for compressed air supply

Accessories Anti-static set

Conical hand-drill, conically shaped, with sharp cutting edges and a solid handle. Ideal for cutting out samples for quality control from soft, paste-like substances (cheese, butter, clay, soap, wax, etc.).

• Stainless steel (1.4028)
• Sterilisable
• According to EN/ISO 707