Heating-Thermostats

Bath liquids.
Use of the appropriate liquids for heat transfer listed here offers many advantages:

• Safe to use, non toxic, and generally odourless formulations
• Resistance to ageing and viscosity changes with low susceptibility to corrosion.

Silicone oils (SIL).
Non-flammable, with long operational life.

Synthetic heat transfer fluids (Synth).
Usually formulated from a hydrocarbon base with low viscosity within the recommended working temperature range.

Viscosity.
For optimal temperature stability the bath fluid must be of low viscosity.

Fire point.
Fluids can spontaneously ignite above a certain temperature. EN 61010 stipulates that the maximum working temperature of the liquid should be 25 °C below its" fire point.

Heating up range.
Prolonged use is not permitted as the self-heating effect within these liquids may cause the overtemperature protection system of the pump unit to operate and shut down the pump.

Operating temperature range.
Thermostats may only be operated for an extended time in this range under certain conditions. Viscosity must not exceed 30 mPas. Otherwise pumps will not achieve their stated performance figures.

Working temperature range.
The long-term use range for peak thermostatic bath performance. Maximum viscosity level is approx. 5 mPas.

Powerful circulators with strong heating and cooling power for operating temperatures from -25 °C to 200 °C. With speed-controlled pressure and suction pump, suitable for external applications. Very good thermal insulation, therefore particularly fast heating-up times and low heat input at low temperatures. All parameters can be read, monitored and documented via software.

• Connection for external Pt100 temperature sensor and external solenoid valves via Multi I/O connection
• Visual and audible warning functions
• USB/RS 232 interface
• Safety drain valve
• Adjustable safety circuit
• Calibration option

CBC 5 basic
With built-in LED display for controlling and monitoring the device parameters.

CBC 5 control
With removable TFT display for controlling and monitoring the device parameters. The display can be used as a remote control, e.g. in a fume hood.

Specifications
Heat output / cooling output: Power input:	2500 W / 350 W 3000 W
Working temperature: Filing volume:	-25 ... 200 °C 5 ... 7 l
Cooling agent:	230 g R134A
Temperature stability (CBC 5 basic // control):	±0.02 °C // ±0.01 °C
Display resolution (CBC 5 basic // control):	0.1 °C // 0.01 °C
Pump flow rate:	31 l/min
Class / Identification acc. to DIN 12876: IP code:	III / FL IP 21
Dimensions (W x D x H): Power supply:	275 x 490 x 690 mm 100-115 ... 230 V / 50 ... 60 Hz

The digital Dry Block Heater with Heated Lid is designed for applications that require repeatable results and superior temperature stability. These multi-purpose units are ideal for isothermal incubation, enzyme reactions, immunoassays, nucleic acid denaturation and a wide variety of other laboratory procedures. Integral support rod holder with locking knob accepts optional External Temperature Probe Kit. Optional External Temperature Probe Kit monitors actual block or sample temperature. Block heater accepts one microplate block or two separate interchangeable modular blocks, accommodating various tube sizes from 0.2 ml micro-tubes to test tubes or vials up to 85 mm in height. Each block has a thermometer well for measuring block temperature. Efficient heating due to close tube-and-block contact with a low density design for exceptional temperature uniformity. The heated lid helps to regulate the temperature and reduce the amount of condensation on sample lids.

• Microprocessor control
• LED-Display
• Temperature Calibration Mode
• Caution Hot Indicator
• Overshoot Protection
• Audible Alarm

Without blocks. Please order separately.

Specifications
Temperature range: Temperature stability at 37 °C:	ambient +5 to 100 °C ±0.2 °C
Uniformity within block at 37 °C:	±0.2 °C
Uniformity across blocks at 37 °C	±0.2 °C
Heat up time to 100 °C:	50 min
Permissible ambient conditions:	18 to 33 °C
Power supply:	230 V, 50/60 Hz

Accessories Temperature Probe Kit for Dry Block Heaters Accessories Blocks for Microcentrifuge and Centrifuge tubes for Dry Block Heaters Accessories Blocks and Combination Blocks for Standard Test Tubes for Dry Block Heaters Accessories Blocks for Vials for Dry Block Heaters Accessories Blocks for PCR vessels and 96/384 well plates for Dry Block Heaters Accessories Cuvette Block for Dry Block Heaters Accessories Accessories for Dry Block Heaters

High wattage, constant-temperature Dry Block Heaters are economical, versatile and compact. These multi-purpose units are ideal for incubation and activation of cultures, enzyme reactions, immunoassays, melting/boiling points and a wide variety of other laboratory procedures. Each of the five models accept separate interchangeable modular blocks, accommodating various sample enclosures such as micro-tubes, centrifuge tubes, vials, microplates, and PCR strips or tubes. Each block has a thermometer well for measuring block temperature. Anodized aluminum modular blocks provide superior temperature stability and heat transfer.

• Microprocessor Control
• Adjustment knobs

Without blocks. Please order separately.

Specifications
Temperature range lower / upper range:	ambient +5 to 100 °C / 75 to 150 °C
Uniformity within block at 37 °C:	±0.2 °C
Temperature stability at 37 °C
1 block: 2 blocks: 4 / 6 blocks:	±1.5 °C ±2.0 °C ±2.5 °C
Uniformity across blocks at 37 °C / Heat up time to 100 °C:
1 block: 2 blocks: 4 blocks: 6 blocks:	- / 45 min ±0.1 °C / 50 min ±0.2 °C / 70 min ±0.3 °C / 75 min
Permissible ambient conditions:	18 to 33 °C
Power supply:	230 V, 50/60 Hz

Accessories Blocks for Microcentrifuge and Centrifuge tubes for Dry Block Heaters Accessories Blocks and Combination Blocks for Standard Test Tubes for Dry Block Heaters Accessories Blocks for Vials for Dry Block Heaters Accessories Blocks for PCR vessels and 96/384 well plates for Dry Block Heaters Accessories Cuvette Block for Dry Block Heaters Accessories Accessories for Dry Block Heaters

The right physical weight and fitting is important for high temperature accuracy inside the sample. All blocks are made out of temperature conductible aluminium. Customized blocks on request. All blocks are autoclavable.

Accessories BlockThermostats TH 21 / TK 23 Accessories HeatingThermoMixer MHR 13 Accessories HeatingThermoMixer MHR 23 / MHL 23 Accessories

EK 45 immersion cooler
This portable cooler features a controller with digital temperature LED display, reaching temperatures down to as low as -45 °C. The compact size of the EK 45 is ideal for pairing with counter-cooled applications making it an economical, sustainable alternative for dry ice, liquid nitrogen, and other quick-chill solutions. The small footprint and sleek handle make this unit convenient for setting up as needed with vapor/solvent trapping, Dewar or other benchtop applications. Multiple probe options are available to meet your custom application need.

EK 90 immersion cooler
This more robust cooler is designed to cool to temperatures as low as -90 °C. The EK 90 begins driving immediately down to -90 °C, with the option of controlling the temperature setting on select models via a digital temperature LED display. Similar to the EK 45, this cooler was designed with overall footprint in mind. The capacity to achieve such low temperatures in such a quick timeframe makes this unit ideal for the direct contact cooling method used in material characterization, as well as cooling reactors, Dewars, and any vapor/solvent trapping applications. Multiple probe options are available meet your custom application need.

Heated bath circulators with stainless steel bath for operating temperatures up to 250 °C. Easy switching between internal and external control. With integrated cooling coil and powerful pressure and suction pump in a housing made of temperature and chemical resistant plastic. The large surface of the radiator allowes for an optimum heat exchange, even heating of the medium and very fast heat-up times. The bath is easy to clean and has a drain valve with hose connection on the front for draining the bath. Can be operated with flammable liquids.

• Adjustable safety circuit
• Simple menu navigation with push buttons and rotary knobs
• Visual and audible warning functions
• USB/RS 232 interface

HBC 5 / 10 basic
With large, easy-to-read LED display.

HBC 5 / 10 control
With removable TFT display for controlling and monitoring the device parameters. The display can be used as a remote control, e.g. in a fume hood. With timer function. A solenoid valve can be connected.

Specifications
Heat output: Power input:	2500 W 2650 W
Working temperature: Operating temperature min.:	Amb. +10 °C ... 200 °C -20 °C
Temperature stability (HBC 5/10 basic // control):	±0.02 °C // ±0.01 °C
Display resolution (HBC 5/10 basic // control):	0.1 °C // 0.01 °C
Pump flow rate: Filing volume:	31 l/min 5 ... 7 l // 8 ... 11 l
Class / Identification acc. to DIN 12876: IP code:	III / FL IP 21
Dimensions (W x D x H) HBC 5 // HBC 10: Power supply:	275 x 500 x 406 mm // 275 x 500 x 456 mm 100-115 ... 230 V / 50 ... 60 Hz

With insulated stainless steel bath tanks, flexible performance and an operating temperature range of up to 200 °C. Temperature control is possible either in the internal bath or in a connected external application.

• Suitable for internal and external applications
• High-quality stainless steel bath vessels with bath lid and drain
• Integrated pump connections M16 x 1
• Integrated cooling coil for counter-cooling
• Bright, white, easily visible display, even from a distance
• Low-level warning system
• Easy switching between internal and external circulation
• Powerful, continuously variable pump
• Pump capacity adjustable from 8 to 27 l/min
• Very quiet
• Rubber feet for secure standing
• USB connection
• RS232 interface
• 3-point calibration
• Class III (FL) according to DIN 12876-1

Scope of supply: Circulator bath, mains power cable, connection box, bath, bath cover, hose connectors 8 and 12 mm

Specifications
Temperature range: Setting accuracy:	20 ... 200 °C 0.01 °C
Temperature uniformity:	±0.02 °C
Pump output:	8 ... 27 l/min
Pump pressure: Heat output:	0.1 ... 0.7 bar 2 kW
Timer: Hose connector inner width:	0 ... 999 min 8/12 mm
Permissible ambient temperature:	5 ... 40 °C
Power supply:	230 V / 50 Hz

Accessories  Accessories Tubing insulations for refrigerated and heating circulators Accessories  Accessories  Accessories  Accessories  Accessories  Accessories

Complete, for KISS E, CC-E and with baths as indicated. Incl. hose connectors NW 12.