pH-Electrodes

pH-combination electrode with glass shaft, ARGENTAL™ reference system with Ag⁺ trap and S7 electrode head.

Cable - please order separately.

pH combination electrode with glass body, Ag/AgCl reference system. With fixed cable, length 1 m (BlueLine 14 pH IDS 1.5 m). BlueLine 11 pH and BlueLine13 pH with screw head (LB 1A or LB 1BNC cable combination please order separately).

• Maintenance-free, robust, combination easy-to-use pH electrode
• Universally applicable, well suited for measurements in emulsions and suspensions
• Thanks to the SINGLE PORE clogging of the diaphragm is practically impossible
• Serial number, certificate

Low-maintenance pH combination electrode with plastic body, Ag/AgCl reference system. With fixed cable, length 1 m (BlueLine 24 pH IDS 1.5 m). BlueLine 22 pH with plug head (LB 1A or LB 1BNC cable combination please order separately).

Redox combination electrodes for measuring the oxidation/reduction potential in aqueous solutions. The signal is generated on the surface of the indicator electrode by an electron exchange with the oxidation/reduction system of the measured medium. Without temperature sensor. With Safelock™ end ring for easy refilling of the reference electrolyte and complete sealing in closed position. For use with a wide variety of measuring instruments.

InLab^® Redox: For general purpose. With platinum ring indicator electrode
InLab^® Redox Pro: For emulsions, wastewater analysis and general purpose. With movable ground joint junction and platinum ring indicator electrode
InLab^® Redox L: For large samples. With platinum ring indicator electrode
InLab^® Redox Au: Combined redox electrode with gold ring indicator electrode
InLab^® Redox Ag: Combined redox electrode with silver ring indicator electrode
InLab^® Redox Micro: For small samples. With platinum ring indicator electrode

Please order connection cable separately.

Free standing electrode vessel for storing electrodes with 12mm diam. shaft.

micro-pH-combination electrode with glass body, Ag/AgCl reference system and plug-in head. LB 1A or LB 1BNC cable combination please order separately.
Ideal for small sample volumes.

For quick and easy measurement of fluoride ions in aqueous solutions. When using the half cell electrodes 9409BN and 9409SC, a separately available reference electrode is needed.

pH-combination electrode with glass shaft, ARGENTAL™ reference system and S7 electrode head.

Cable - please order separately.

pH-combination electrode with polysulfone shaft, Ag/AgCl reference system and S7 electrode head.

Cable - please order separately.

pH electrodes with plastic shaft and liquide electrolyte. SenTix^® SP with plug head (AS/DIN or AS/BNC cable combination please order separately). SenTix^® SP-DIN with 1m-fixed cable.
For penetration measurements.

With glass shaft, Ag/AgCl reference system, connections for AS/DIN, AS/DIN-3, AS/BNC, S7 plug head.

pH-combination electrode with glass shaft, ARGENTAL™ reference system with Ag⁺trap and MultiPin™ electrode head.

Cable - please order separately.

With plug head, glass shaft, platinum diaphragm (N 64 with sleeve diaphragm), 3mol/l KCl electrolyte, Silamid^® reference system and 12mm dia. spherical membrane.

Connection cable for pH electrodes with plug head connection to plugs as indicated.

Combined ISE and GSE electrodes.

With integrated reference electrode. Easy cleaning of the diaphragm between measurements with Click & Clear™ (except Na electrode): by pressing the electrode head, the electrolyte solution flows through the diaphragm. The electrolyte can be easily emptied and refilled. Optimum contact between sample and electrolyte solution is always guaranteed.

Scope of supply: Sensor with permanently connected 1.2 m cable with BNC connection, 60 ml reference electrolyte, operating instructions

Scope of supply Na-electrode: Sensor with S7 plug head, diaphragm made of glass with higher sensitivity to sodium, 25 ml reference electrolyte, operating instructions

Modular half cell with exchangeable diaphragm and S-7 plug head for determining the concentration of individual ions in aqueous solutions. Easy to use and require comparatively low expenditure on apparatus thereby offering advantages over wet chemistry and instrument analysis methods. Ion selective electrodes must be used in conjunction with a suitable reference electrode (InLab^® Reference, cat no. 9.041 590 or InLab^® Reference Plus, cat no. 9.041 591).

With glass shaft, pH glass membrane reference system and plug head.

With glass shaft, Silamid^® reference system and plug head.

For the SensoLyt^® armature, for the installation in a flow vessel or in a replacement fitting

• For drinking water, wastewater or in the process
• Also for high pressure and temperature conditions
• Easy to maintain by easy measuring chain replacement

Microelectrode, glass shaft, Silamid^® reference system, with 1 m or 1.5 m (A 157 IDS) fixed cable.

Glass shaft, Silamid^®-reference system, with 1 m or 1.5 m (A 7780 IDS) fixed cable.