Samplers, Solids

For thoroughly cleaning of Zone samplers.

The all-layer drill is a zone collector especially for media with high density and highly compacted powders and granulates, e.g. for larger containers, mixed containers, big bags, in the building materials, chemical, food and beverage industries.

• Food-safe
• Autoclavable

The scratcher is a special sampler for powders and granules that do not flow freely, as well as for caked bulked goods. With the sliding separators made of PTFE, the inner tube can be divided into zones of different sizes. The separators also prevent mixing of the sample.

• Food-safe
• Autoclavable

White. Ideal for sampling in multi-zone-clean rooms. Long handle reduces the risk of direct contact with the sample substance. Markable snap-on lid and lock-tab allow hygienic and loss-free transport of the sample.

• Individually sealed
• Gamma sterilised
• Food-safe
• Scoops can be used as weighing boat
• Lot stamped for accurate lot tracing
• Shipped with a Certificate of Processing for Sterilization
• Made from FDA grade materials

White. Ideal for sampling in multi-zone-clean rooms. Long handle reduces the risk of direct contact with the sample substance.

• Individually sealed
• Gamma sterilised
• Can be used as weighing boat
• Food-safe
• Lot stamped for accurate lot tracing
• With certificate of sterilisation

For sampler Mole and SiloDrill.

For simple removal of liquid samples.

• Good view due to transparent tubes
• Upper end with reflux valve, lower end with ball valve
• All-layer and point sampling possible
• 500 ml dip sampler stepless extendable

The samplers can be used in the punch process to remove a circular sample of tissue of 5 cm² from the surface. They are suitable for carcass sampling, in histology, in cheese factories and in the food and luxury items industries.
The drill head has a hexagonal socket for bit holders or chucks, suitable for all commonly used cordless screwdrivers or drilling machines. The sharp cutting edge made of stainless steel makes it easy to cut out sample pieces. A hole in the crown prevents air compression and is also used to eject the samples.

• According to DIN EN ISO 17604:2015-12
• Food-safe
• Autocavable

The soil sampler made from iron consists of 3 parts: a handle with rod, optional extensions and the hardened drill bits. For determining soil properties, moisture
and structure. Extension rods can extend the working depth of the Mole down to 5 m. Individually customisable.

Drill bits for different soil properties:
Clay and damp soil: With narrow side panels for minimum soil friction/resistance. The soil adheres to the bit very well
Sand: With broad side panels and therefore a large retention capacity for the sand
Coarse sand: With extra broad side panels for sampling sandy soils and very dry soils
Combination: Retains both strongly cohesive and less cohesive soils
Riverside: Very suitable for drilling in hard, encrusted soils and soils mixed with fine gravel. The drill cutters project from the drill itself, so that friction is greatly reduced
Gravel drill: With slightly rounded, oblique scoops. Any stones present are clamped between the drill sides.
Stone catcher: The stone catcher is used to collect and remove stones that prevent proper sampling

For taking free-flowing or self-flowing samples from bulk goods. Emptying takes place via the tip. The sample can be emptied directly into the sample container without having to disassemble the EasySampler, in order to obtain a mixed sample for instance. For sample opening from 52 mm Ø.

• Food-safe
• Autoclavable

For light soils, meadows and lawns. Flute length 300 mm.

With the Novartos Uno sampler, target point samples can be taken from a predefined sample zone. Therefore the sample chambers are fitted with two or three sample inserts. It is possible to withdraw a double- or triple-sample without inserting the lance repeatedly into the bulk material. Mixing is mainly prevented in this way.

• Stainless steel V4A (1.4404 / 1.4571)
• Sampling according to FDA guidelines for Unit-Dose-Sampling
• Precision-fit, easily interchangeable sample inserts (please order separately)
• The insertion depths can easily be read from the laser-engraved depth scale
• Groove-free and electro-polished
• Food-safe
• Autoclavable

With Novartos Multi double and triple zone sampling, multi-point samples can be taken from multiple predefined sample zones. Depending on the length, four, seven or nine collection chambers are equipped with two or three sample inserts each. It is possible to withdraw a multiple sample without inserting the lance repeatedly into the bulk material. Mixing is mainly prevented in this way. Withdrawal of a sample can be prevented at certain points with blind inserts (0.0 ml).

• Stainless steel V4A (1.4404 / 1.4571)
• Sampling according to FDA guidelines for unit-dose sampling
• The sample inserts fit precisely and can easily be replaced (please order separately)
• The insertion depths can easily be read from the laser-engraved depth scale
• Groove-free and electro-polished
• Food-safe
• Autoclavable

Conical hand-drill, conically shaped, with sharp cutting edges and a solid handle. Ideal for cutting out samples for quality control from soft, paste-like substances (cheese, butter, clay, soap, wax, etc.).

• Stainless steel (1.4028)
• Sterilisable
• According to EN/ISO 707

For sampling cohesive, caked and not free-flowing substances.

• Food-safe
• Autoclavable