Protein-Elektroforez

Standard and Weighted Spectra/Por Closures provide a leak-proof seal for dialysis tubing while aiding in sample buoyancy and vertical orientation. They are available in 23, 35, 55, 75 and 90 mm sealing widths and a variety of colors for easy sample identification. Closures are autoclavable.

Standard Grade Regenerated Cellulose (RC) is a clear, flexible and sturdy dialysis tubing. This tubing is ideal for a broad range of applications in which there is a significant size difference between the MW species being separated, including sample preparartion, desalting, buffer exchange, pH change, protein purification. Offering a good chemical compatibility, Standard Grade RC can be used with dilute strong acids and bases, concentrated weak acids and bases, most alcohols and some mild or dilute organics, including DMSO. Standard RC can tolerate pH 2 to 12 and temperatures 4 to 121 °C
RC dialysis tubing supplied dry with glycerol humectant for easy handling and manipulation. Soak in DI water for 30 minutes to remove glycerol. Contains trace levels of heavy metals and sulphides.

Spectra/Por® 1, 3 und 4:	For standard dialysis, different MWCO and flat widths
Spectra/Por® 2:	Dialysis Tubing with higher permeability

The gel electrophoresis tank OmniPAGE Mini is suitable for parallel treatment of up to 4 gels with 20 samples each. The tank is easy to handle, especially leak proof and
guarantees an efficient cooling. For self-cast gels and all major types of 8 x 10cm and 10 x 10cm precast gels.

omniPAGE TETRAD Mini-Set, CBS: Additionally with Blotting Module.

Supplied with:

• omniPAGE Mini, 10 x 10cm Dual
• 1x CVS10DIRM Sliding Clamp PAGE insert
• 1x CVS10EXCASTER External Casting Upstand
• 1x VS10TANK Tank
• 1x VS10LID Lid
• 1x VS10DP Dummy plate
• 1x CSL-CAB set of electrophoresis cables, one black, one red
• 2x VS10PGS1 Plain glass plates with 1mm bonded spacer (pack of 2)
• 2x VS10NG Notched glass plates (pack of 2)
• 2x VS10NGS1 Notched glass plates with 1mm bonded spacer (pack of 2)
• 4x VS10-12-1 = 4x 12 sample combs, 1mm thick
• 1x VS10DCAST Casting base with casting mat

Vertical chamber especially for protein analysis in up to 4 gels. The special manufacturing process results in a device with unique quality and durability at a very reasonable price. Easy handling and fast cooling. The dimensions are compatible with all 8 x 10 and 10 x 10 cm ready-to-use gels. High sample throughput by up to 4 gels with 20 samples each. Low buffer volume from 250 to 1200 ml.

Supplied with:
OmniPage Mini: chamber with platinum electrodes, 2 sets of glass plates with 1 mm thick bonded Spacers, electrodes, 2 x 12 sample combs.
OmniPage Mini SYS: OmniPage Mini + caster.
OmniPage Mini CBS: OmniPage Mini + caster and blotting insert.

Technical specifications
Gel dimensions (W x L):	7.5 x 8 cm
Unit dimensions (W x D x H):	19 x 13 x 15 cm
Max. sample capacity:	80 samples, 20 samples per gel
Buffer volume:	min. 250 ml; max 1200 ml

Aksesuarlar Accessories for Electrophoresis Tank OmniPage Mini

Designed to perform a variety of separations, including first- and second-dimension SDS-PAGE, native, preparative, gradient and high-resolution nucleic acid electrophoresis, plus capillary tube gel IEF and electroblotting, the VS20 WAVE is one of the most versatile maxi vertical systems available.
By introducing innovative, new vertical screw-clamp technology only four screws are now necessary to secure as many 20 x 20 cm gels. This gives the VS20 WAVE Maxi the selective advantage of a much faster set up speed compared to competitor products whose traditional clamping configurations require as many as 24 screws to secure just two glass plates. In addition, the WAVE's vertical screw-clamp configuration distributes pressure evenly along the height of the gel rather than in the centre to eliminate plate bowing and gel compression, but still maintains a leak-proof seal during casting; while the ergonomic wave-like design aids both handling and set up.
Whatever your requirements are the WAVE can be made to meet them. Regardless of whether it is running 2 or 4 gels, electroblotting, and IEF using capillary tube gels or IPG strips, all of these techniques may be performed using the same omni-purpose unit while retaining the benefits of large format electrophoresis, such as extended separation distances, greater sample throughput and superior resolution.


VS20WAVESYS incl. VS20 WAVE Maxi, Glass plates, 2 x 24 well combs, cooling coil, casting base.
VS20WAVESYS-CU incl. VS20 WAVE Maxi, 20 x 20 cm Dual, 2 sets of Glass Plates, 1 mm thick bonded spacers, 2 x 24 sample, 1 mm thick combs, cooling coil, dummy plate, caster, external casting upstand.
VS20CBS incl. WAVE Maxi Vertical Unit, 2 x 4 mm thick notched glass plates, 2 x 4 mm thick plain glass plates with 1 mm thick bonded spacers, 1 x dummy plate, 2 x combs (1 mm thick 24 samples), 1 x casting base, silicone mat, cooling pack.
plus: 1x WAVE Standard Electroblotting Module which includes: WAVE Maxi Platinum Wire Blotting Insert, 4 x compression cassettes and 18x fibre pads.

Specifications
Gel dimensions (W x L): Gel dimensions (W x L) VS20CBS:	20 x 20 cm 17.5 x 18 cm
Unit dimensions (W x D x H):	30 x 18 x 27 cm
Max. sample capacity:	2 x 48 samples
Buffer volume: Buffer volume VS20CBS:	min. 4.8 l (4 gels), max. 5.3 l (2 gels) min. 5.3 l, max. 6.4 l

Aksesuarlar Accessories for Gel Electrophoresis Tank VS20 Wave Maxi

Enhanced Coomassie based protein stain formulated for fast and sensitive protein detection without the involvement of hazardous chemicals such as methanol, acetic acid, and other toxic agents. Protein detection limits are as low as 10 ng and visualization can be achieved in less than 1 hour. Applications suitable for native PAGE, SDSPAGE, isoelectric focusing, and 2D gels.

• Detection of protein concentration as low as 10 ng
• Protein bands visualization within 10 minutes
• Without involvement of hazardous chemicals

Combination package for any horizontal electrophoresis application. Ideal for starting work on electrophoresis techniques.

• Electrophoresis tank multiSUB Mini can process up to 64 samples and is equipped with 2 gel tray sizes (7 x 7 cm and 7 x 10 cm)
• Power supply nanoPAC with two-step function for changing the programming of voltage, current and time during the run

Scope of supply:
MSMINIDUO-NANO300: Electrophoresis tank multiSUB Mini DUO, power supply nanoPAC-300P
MSMINIDUO-NANO300-Kit: Electrophoresis tank multiSUB Mini DUO, power supply nanoPAC-300P, agarose (100 g), DNA ladder (250 bp to 10 Kb), DNA loading dye Bromophenol blue, TBE-running buffer powder (10 x 1 l)

Suitable for BIO-RAD™ Mini-PROTEAN™ III and Tetra Cell.
Pack of 5 plates.

The protein ladder is a three-color protein standard with 10 pre-stained proteins. The coloured reference bands are used as visual indicators for the process of SDS-PAGE and the efficiency of the transfer to membranes in the Western Blot. This marker is suitable for the precise identification of the molecular weight of most cellular proteins.

• 7 blue, 2 orange reference bands and 1 green reference band
• Ladder is supplied in gel loading buffer and is ready-to-use
• Vial of 500 µl