Hijyen izleme

The Lovibond® Dipslides are designed to test liquids as well as surfaces. They are ideal for use in many applications including evaporative cooling towers, closed water circuits, cutting fluids, food testing, and many more.
These dual-sided Dipslides are available in a wide range of different media types.

Single or double cotton bud. Wooden, PP or paper applicator.
WA 1-l, WA 1 D: Calibrated wooden rod with minimum diameter tolerances.
WA 1s, WA 1s PL, WA 1s 2x, WA 1s 25x, WA 2 PLs: Single, double or 25 pieces packed in peel-pack, EO-sterilized.
WA 7, WA 7 PL: Double cotton bud.
WA P: Flexible, bendable

Nursing pads

• Absorbent cellulose pads
• 12-ply

Filtration unit for use with a Sartorius vacuum manifold or direct attachment to a special vacuum pump. Biosart^® 100 Monitors have been specifically designed for the microbiological testing of pharmaceuticals, food, beverages, water and other liquids. These sterile disposable units with built-in membrane filter and cellulose pad are ready to use. After filtration, just remove the 100ml funnel to convert the monitor into a petri dish. Culture media for wetting the pad are available in individually sterilised, convenient plastic ampoules. Biosart^® 100 Monitors are ready to use filter units designed to fit onto the receivers of a vacuum manifold. For use with Biosart^® 100 culture media.

Premium rubber anti-fatigue mat.

• Shaped bevelled edges
• Silicone und Latex-free
• Suitable for use in cleanrooms of class ISO 5
• 3 years warranty

Height-adjustable colony counter with easy-to-clean plastic housing.

• Luminous field with direct and indirect, glare-free illumination
• Glass pane with cm² and 1/9 cm² graduation
• Colony counting marker with fibre pen
• For Petri dishes with diameter up to 145 mm
• With reducing insert for smaller Petri dishes

Romer Labs HygieneChek™ PLUS Dip- Slide is an agar-based dip slide system for monitoring the bacterial content on surfaces and in liquids. The system consists of a double-sided carrier paddle, which is used with the help of selective culture media for the detection and identification of microorganisms in the field of hygiene control, e.g. in the food industry, cosmetics and pharmacy. The thick layer of agar promotes good growth of germs and prevents the culture media from drying out.

Features & Benefits:

• Sampling directly from surfaces or from liquids e.g. in production lines, kitchens, canteens, clean rooms and for personnel control
• Use in sedimentation processes for air monitoring
• Easy handling without expensive equipment
• Complies with HACCP requirements according to DIN10113-3
• High detection reliability
• Suitable for the transport of samples
• 10 cm2 detection area per side, 1 cm2 counting grid

Compact sampling system for various sampling methods e.g. air sampling on standard petri-dishes with the air sampling heads LKS 30 (30 l/min) and LKS100 (100 l/min) and the total spore content on slides with the particle collector PS 30 (30 l/min).

• Anodised aluminum housing with two tripod threads
• Battery operation up to 22,000 liters of sampling air with one charge
• Electronic volume flow control from 30 l/min up to 100 l/min
• Sampling volumes preselectable from 10 to 10,000 litres
• Start delay up to 24 hours can be activated
• Illuminated 4.3 inch colour display with touch operation
• Integrated temperature sensor
• Ring buffer for data of the recent 100 samplings
• USB interface
• Dimensions (W x D x H): 180 x 255 x 160 mm without sampling head
• LKS 30 and LKS100 are validated in accordance with EN ISO 14698-1

Ready-to-use, pre-hydrated sponges for easy and convenient environmental and food sample collection.

• Stick-mounted sponge design allows you to access hard-to-reach areas without directly handling the sponge
• Stick-mounted sponge design provides the ability to easily snap off the sponge from the handle after swabbing
• 38 x 76 mm biocide-free sponge does not affect organism viability

Ready-to-use, pre-hydrated sponges for easy and convenient environmental and food sample collection.

• Stick-mounted sponge design allows you to access hard-to-reach areas without directly handling the sponge
• Stick-mounted sponge design provides the ability to easily snap off the sponge from the handle after swabbing
• 38 x 76 mm biocide-free sponge does not affect organism viability

SurfACE™ Sponge Sticks from Romer Labs are perfectly suited for surface hygiene monitoring, e.g. in food production or in the environment. The sterile sponge is attached to a handle with a quick-release mechanism for fast and convenient dropping. After sampling, the sponge is dropped into the sample bag so that only it is returned to the laboratory. Interference with sample processing by unneeded parts is thus avoided.
The sponge is available moistened with various buffers or also dry and individually packed in the sample bag.

• Sponge stick in individual 14.5 x 30 cm Twirl-Tie™ shipping/sample bag
• Pouch easily opened with pull tabs, includes labeling area
• Biocide-free cellulose sponge with 7.5 x 3.5 cm
• Simple and quick sponge release mechanism
• With thumb stopper to prevent accidental sponge contact
• Long handle for hard to reach areas (22 cm)
• Compatible with existing extension poles
• Sterility due to gamma irradiation