Peristaltic pumps

With 3 colour-coded bridges (international standards). Shore: 55. Fits most common peristaltic pump models, e.g. Verder, Ismatec, Watson-Marlow, IKA and Heidolph. Standard tubing, transparent. Length 380mm. Long working lifespan. Good resistance to acids and alkalis. Food-safe.

Alternative Peristaltic pump tubing, Tygon® LMT-55 with 2 colour-coded bridges Alternative Peristaltic pump tubing E-LFL with 2 colour-coded bridges Alternative Nominal tubing for pumps, Tygon® LMT-55 without collars

With 2 colour-coded bridges (international standards). Shore: 55. Fits most common peristaltic pump models, e.g. Verder, Ismatec, Watson-Marlow, IKA and Heidolph. Standard tubing, transparent. Length 380 mm. Long working lifespan. Good resistance to acids and alkalis. Food-safe.

Alternative Peristaltic pump tubing E-LFL with 2 colour-coded bridges

Dosing and Feeding pumps for reproducible results. Flow characteristics in combination with various tubing diameters are pre-programmed for accurate flow rate numbers. With freely selectable process parameters.

• Speed, direction of rotation and on / off function is controllable with an analog interface or digital with built-in RS232 interface
• Pre-programmed flow characteristics are shown in the display
• Digital read-out of Speed, Tubing diameter, Flow rate, Dosing volume, Interval dosing, Pause function
• With buttons for selecting all process parameters
• Easy calibration of flow volume and flow rate
• Smooth start operation prevents from spills and splashing media
• A press of the max button accelerates the filling and draining of the tubing
• For safety in unattended continuous operation, the motor will be switched off in case of an overload situation to prevent overheating
• Optional footswitch to operate pump drive in closed fume hoods and to facilitate filling operations
• Pump heads with convex rollers for cell protection are available for use in cell biology

The pump head is not included. Please order separately.
With an optional pump head adapter the Hei-FLOW Ultimate 120 can be upgraded for multi-channel operation.

Specifications
Control accuracy motor:	± 0.5 %
Motor power:	100 W
Volume dosing:	0.001 ... 9999 ml
Interval dosing:	0.001 ... 9999 ml in breaks 0.1 s ... 750 h
Permissible ambient conditions:	5 ... 31 °C
Permissible rel. humidity:	80 %
Dimensions (W x D x H):	166 x 256 x 225 mm
Specifications
Speed range:	5 ... 120 rpm
Flow rates single-channel pumps:	0.38 ... 813 ml/min
Flow rates multi-channel pumps:	0.005 ... 364 ml/min
Flow rate accuracy (water without counter pressure):	± 1 %
Weight:	7.7 kg

Accessories Single-channel Pump Heads SP quick for Pump drives Hei-FLOW Accessories Single-channel Pump Heads SP standard and SP vario for Pump drives Hei-FLOW Accessories Multi-channel Pumps for Pump drives Hei-FLOW Accessories Accessories for Pump Drive Hei-FLOW Alternative Analog Pump drive Hei-FLOW Core 120 Alternative Analog Pump drive Hei-FLOW Core 600 Alternative Pump drive Hei-FLOW Advantage 01 Alternative Pump drive Hei-FLOW Expert 600

Feed pump for standard applications. The speed is adjustable with the analog control knob and stays constant even under changing loads.

• Smooth start operation prevents from spills and splashing media
• Feed direction reversible
• For safety in unattended continuous operation, the motor will be switched off in case of an overload situation to prevent overheating
• Optional footswitch to operate pump drive in closed fume hoods and to facilitate filling operations
• Pump heads with convex rollers for cell protection are available for use in cell biology

The pump head is not included. Please order separately.
With an optional pump head adapter the Hei-FLOW Core 120 can be upgraded for multi-channel operation.

Specifications
Control accuracy motor:	± 2 %
Flow rate accuracy (water without counter pressure):	± 5 %
Motor power:	100 W
Permissible ambient conditions:	5 ... 31 °C
Permissible rel. humidity:	80 %
Dimensions (W x D x H):	166 x 256 x 225 mm
Weight:	7.6 kg
Specifications
Speed range:	10 ... 120 rpm
Flow rates single-channel pumps:	0.83 ... 861 ml/min
Flow rates multi-channel pumps:	0.005 ... 364 ml/min

Accessories Single-channel Pump Heads SP quick for Pump drives Hei-FLOW Accessories Single-channel Pump Heads SP standard and SP vario for Pump drives Hei-FLOW Accessories Multi-channel Pumps for Pump drives Hei-FLOW Accessories Accessories for Pump Drive Hei-FLOW Alternative Pump drive Hei-FLOW Advantage 01 Alternative Pump drive Hei-FLOW Expert 600 Alternative Pump drive Hei-FLOW Ultimate 120 Alternative Pump drive Hei-FLOW Ultimate 600

Feed pump for standard applications. The speed is adjustable with the analog control knob and stays constant even under changing loads.

• Smooth start operation prevents from spills and splashing media
• Feed direction reversible
• For safety in unattended continuous operation, the motor will be switched off in case of an overload situation to prevent overheating
• Optional footswitch to operate pump drive in closed fume hoods and to facilitate filling operations
• Pump heads with convex rollers for cell protection are available for use in cell biology

The pump head is not included. Please order separately.
This pump drive is only suitable for use with single-channel pump heads.

Specifications
Control accuracy motor:	± 2 %
Flow rate accuracy (water without counter pressure):	± 5 %
Motor power:	100 W
Permissible ambient conditions:	5 ... 31 °C
Permissible rel. humidity:	80 %
Dimensions (W x D x H):	166 x 256 x 225 mm
Weight:	7.6 kg
Specifications
Speed range:	50 ... 600 rpm
Flow rates single-channel pumps:	4.0 ... 4151 ml/min

Accessories Single-channel Pump Heads SP quick for Pump drives Hei-FLOW Accessories Single-channel Pump Heads SP standard and SP vario for Pump drives Hei-FLOW Accessories Accessories for Pump Drive Hei-FLOW Alternative Pump drive Hei-FLOW Advantage 01 Alternative Pump drive Hei-FLOW Expert 600 Alternative Pump drive Hei-FLOW Ultimate 120 Alternative Pump drive Hei-FLOW Ultimate 600

Compact design, ready to use, no set-up required. Constructed in chemically resistant materials. Quiet operation.

• 100% oil-free pumping of gases
• gas ballast as standard for working with condensable vapours
• good vacuum even with gas ballast
• high vapour tolerance for water and solvents
• long service life, low maintenance

Features:
2AK: Inlet and outlet separator
AK + EK: Inlet separator, exhaust vapour condenser
PC 510 select (two-stage) / 610 select (three-stage) : with AK + EK; 1 electronically controlled vacuum port
PC 511 select (two-stage) / 611 select (three-stage) : with AK + EK; 1 electronically controlled and 1 manually controlled vacuum port
PC 520 select (two-stage) / 620 select (three-stage) : with AK + EK; 2 electronically controlled vacuum ports

Characteristics and applications:
Without vacuum control:
MZ 2C NT +2AK: e.g. filtration, distillation without condensation at the outlet
MZ 2C NT +AK+EK: Well-proven unit for a wide range of applications for a single-user, e.g. gel drying, distillation, vacuum concentrator. For solvents with medium to low volatility.
MD 1C +AK+EK: Space-saving single-user configuration. For high-boiling-point solvents.
MD 4C NT + AK+EK: Larger or multi-user applications, the local vacuum network VACUU·LAN^®. For high-boiling solvents.
MV 10C NT +EK: Four-stage diaphragm pump with exhaust vapour condenser. For particularly high demands regarding low ultimate vacuum and pumping speed in chemistry laboratories, pilot plant or small production units.

With vacuum controller:
PC 510 select / 511 select: Well-proven units for a wide range of processes in chemistry laboratories, e.g. all common solvents. PC 511 select with addtional manually controlled vacuum port.
PC 610 select / 611 select: Proven solution for supporting electronically controlled evaporation or drying processes even with many high boiling point solvents. PC 611 select with additional manually controlled vacuum port.
PC 520 select / 620 select: Compact solution for simultaneous operation of two electronically controlled vacuum applications with one single pump.

Alternative Chemistry Pumping Units VARIO® select Alternative Chemistry Pumping Unit PC 3001 VARIO® select with condenser Peltronic® Alternative Diaphragm pumps chemistry design, ME 1C, MZ 1C, MD 1C

Simple Click'n'go mini tubing assembly cartridges.

• 3-stop colour-coded tubing
• Fixed-speed motor

Alternative Pumps, peristaltic, Reglo-Analogue Alternative Pumps, peristaltic, Reglo-Digital

The behrotest peristaltic pumps PLP are suitable for the transport of watery solutions / non aggressive applications.
They find their application in the laboratory, the food industry as well as in the analytical, medicinal or biological field.
The RPM (rotation per minute) can be adjusted manually and the flow direction can be amended.
These PLP pumps have angle connectors to which tubing can be attached either with or without additional brackets, depending on the tube size.

Alternative

Assemblies and Tubings
Hamilton Luer Lock tubing assemblies are ideal for quickly connecting and disconnecting components with male luer locks suitable for micro fluidic applications. Hamilton offers a wide varitey of chemically inert tubing assemblies for specific fluid applications. Different gauges, lengths, hub assemblies, and fittings are available according to standard or customer specification. To build your own assemblies, Hamilton offers fitting kits and tubings. Hamilton fittings and adapters are installed finger tight and provide leak tight seal rated to 0.6 MPa.

Hub Tubing Assemblies with 2 Hubs and further tubing lengths available on request.
The tubing is 300 mm in length but can be trimmed shorter to a desired length.

• Simple, fast tubing changes
• Fixed occlusion eliminates adjustment after tubing changes and assures operation against pressure up to 30 PSIG
• Contamination free pumping fluid contacts only the tubing material
• Controls are mounted on front panel with a separate single-turn speed control
• Flow direction switch with center "OFF" position
• Green LED power "ON" indicator
• "Prime" button runs pump at maximum speed to rapidly prime or flush tubing
• Reversible pump direction permits purging of tubing prior to use
• Flow rates less than 2 ìl/min to 105 ml/min
• Pressure up to 2.5 bar (30 PSIG)
• Accurate and repeatable flow delivery
• Filtration, up to 60 PSIG
• Address a wide range of critical applications with tubing materials that are approved to USP class VI, FDA and NSF standards
• Accommodates all sizes and formulations of microbore flow rated tubing ergonomic design
• Space efficient low profile, stackable design
• Remote capability actuate unit with a foot switch or contact closure

Specifications
Operating temperature:	0 to 40ºC
Storage temperature:	-25 to 65ºC
Housing materials:	Powder-coated steel
IP rating	IP 22
Agency approvals:	UL, cUL, CE, ROHS Power Supply
Controller dimensions (L x W x H):	17.8 x 13.4 x 11.4cm
Weight:	1.5kg
Voltage (50/60 Hz):	90-130 or 160-260V AC (auto selected)
Motor type:	PMDC
Control type:	PWM (Pulse Width Modulated)

• These pump drives are able to be configured for multi-channel use: Value 01, Advantage 01, Precision 01
• Increased output by running up to 12 individual cassettes on one single pump drive and pump head system
• Separate metering into multiple vessels with different feed rates at the same time by using different tubing dimensions to adjust flow rates
• Easy and quick tubing change
• In addition to standard pump heads which feature a 4 roller system, 8 roller pump heads are available for low pulsation
• Easy change of cassettes, even during operation
• Cassettes adjustments and changes are simple due to click system
• With possibility to upgrade the pump drive with an adapter for multi-channel operation

• Microprocessor controlled
• Very precise pumping
• 8 actively driven stainless steel rollers
• Transparent keyboard and LED-display
• Click'n'go cassettes providing defined and repeatable occlusion conditions
• Different tube sizes can be inserted in each channel
• 2 Stopper tubes
• Differential pressure: 1.0 bar

-With "standby-mode" (prevents draining the tubing line e.g. overnight)

• With dispensing and calibration functions

Specifications IPC and IPC-N:
Motor type: Speed:	d.c. motor IPC: 0.4 up to 44 rpm IPC-N: 0.11 up to 11.25 rpm
Speed setting: Flow rate setting:	1 to 100 %, resolution 0.1 % in µl/min to ml/min
Input: Supply requirements:	30W 230V 50Hz, 115V 60Hz (selectable)
Protection class:	IP 30
Specifications IP and IP-N:
Motor type: Speed:	d.c. motor IP: 0.4 up to 44 l/min IP-N: 0.11 up to 11.25 l/min
Speed setting:	1 to 100 %, resolution 0.1 % IP; rpm, resolution 0.1rpm IP-N: rpm, resolution 0.03 rpm
Input: Supply requirements:	30W 230V 50Hz, 115V 60Hz a.c. (selectable)
Protection class:	IP 30

Accessories

• Microprocessor controlled
• Very precise pumping
• 8 actively driven stainless steel rollers
• Transparent keyboard and LED-display
• Click'n'go cassettes providing defined and repeatable occlusion conditions
• Different tube sizes can be inserted in each channel
• 2 Stopper tubes
• Differential pressure: 1.0 bar

Accessories

Flow rates from 0.0002 to 380 ml/min. The speed can be adjusted manually or automatically through optional external control. Easy to operate.

• Accepts various pump heads (please order separately)
• Prime key for fast filling and emptying
• Adjust speed manually or automatically through optional external control
• Memory function, storing the running parameters automatically
• Membrane keypad, easy to operate
• Good performance and low price

Specifications:
Speed:	0.1 to 100 rpm, reversible
Speed precision:	0.1 rpm
Speed control:	Membrane keypad
Display:	3-digit LED displays current rpm
Communication interface:	RS485
Power supply:	90 bis 260 Vac 50/ 60 Hz
Power consumption:	< 30 W
Operating condition:	0 to 40 °C
Relative humidity:	< 80%
Dimensions (L x W x H in mm):	232 x 142 x 149
Drive weight (without Pump Head):	2.3 kg
IP code:	IP 31

Accessories Pump Heads for PLP 380, PLP 2000 and PLP 6000 Alternative

Easy to operate. DC brushless motor and close loop control integrate circuit. It features big torque, small vibration, high efficiency and non maintenance.
Flow rates from 3.8 to 6000 ml/min. The speed can be adjusted manually or automatically through optional external control.

• Accepts various pump heads (please order separately)
• Prime key for fast filling and emptying
• Adjust speed manually or automatically through optional external control
• Memory function, storing the running parameters automatically
• High torque grants the use of double channel pump heads
• Easy to operate through start/stop switch and rotary encoded switch for speed control
• Good performance and low price

Specifications
Speed:	60 to 600 rpm
Speed precision: Resolution: Torque:	± 1% 1rpm >=1,60 Nm
Speed control:	Start/stop switch and rotary encoded switch
Display:	3-digit LED displays current rpm
Communication interface:	RS485
Power supply:	176 to 264 Vac 50/ 60 Hz
Power consumption:	< 200 W
Operating condition:	0 to 40 °C
Relative humidity:	< 80%
Dimensions (L x W x H in mm):	285 x 207 x 180
Drive weight (without Pump Head):	5.2 kg
IP code:	IP 31

Accessories Pump Heads for PLP 380, PLP 2000 and PLP 6000 Alternative

Independent 4-Channel Control Pump

• Increased efficiency
• Control of complex pump applications with only one pump
• Controlled by computer or directly through the control panel on the pump
• Continuous pumping and precise dosing
• Flexible bi-directional flow direction in each channel
• Self-priming
• Especially for viscous or foaming liquids, also when containing particles or live cells
• Contamination-free pumping even under sterile conditions

Flow rate:	0.0001 to 43 ml/min
Differential Pressure: Tubes:	Max. 1.0 bar (14.5 psi) 3 stoppers 0.13 to 3.17 mm ID

Powerful, precise peristaltic pumps for continuous operation in various speed ranges. Flexible application due to the use of various pump heads and hoses. The most important parameters can be set quickly and easily using the control panel on the housing; the speed can be programmed directly on the unit. Housings are available in white powder-coating (protection class IP54) and stainless steel ("i" models, protection class IP65). The connection technology of the pump heads guarantees rapid handling.

• Pump drives with two different motors (50 or 100 watts) are available depending on the application, flow rate and medium
• Exchangeable pump heads in single-channel or multi-channel design (not included in scope of delivery)
• Reversible conveying direction
• Quick exchange of pump heads without the use of tools
• Calibratable
• USB and RS232 interface for PC connection
• Pump heads of other manufacturers can be fitted without difficulty with an adapter

Scope of supply: Peristaltic pump rotarus^® standard, power supply, connection cable EU, UK, US

Specifications	rotarus® standard 50 // rotarus® standard 100
Speed range:	0.2 ... 100 min-1 // 5 ... 500 min-1
Flow rate range:	0.0001 ... 1500 ml/min // 0.0036 ... 5400 ml/min (depending on pump head)
Working temperature range:	-4 ... 40 °C
Weight: Power supply:	7,1 kg // 9,8 kg 100 ... 240 V, 50/60 Hz

Accessories Pump heads rotarus® Accessories Accessories for rotarus® peristaltic pumps Accessories Rotary piston pump heads for rotarus® pumps

Comfortable, precise and performant peristaltic pumps for continuous operation in various speed ranges. With control of speed and flow rate. Variable cycles and graduated pump speeds can be controlled precisely and reliably. Housings are available in white powder-coating (IP54 protection) and stainless steel ("i" models, IP65 protection). With integrated RFID technology for detection of pump head and hose as well as automatic blockage detection and hose burst control. A control panel for the most important functions is integrated directly on the pump housing, the external control panel is equipped with a touch screen. The connection technology of the pump heads guarantees rapid handling.

• Control of variable cycles and graduated pump speeds
• External, wired control panel, detachable
• Pump drives with two different motors (50 or 100 watts) are available depending on the application, flow rate and medium
• Exchangeable pump heads in single-channel or multi-channel design (not included in scope of delivery)
• Reversible conveying direction
• Quick exchange of pump heads without the use of tools
• TFT touch screen with user-friendly menu
• Calibratable
• Integrated method memory
• Flow rate, calibration function, method memory programmable on the operating module
• USB and RS232 interface for PC connection
• Pump heads of other manufacturers can be used without difficulty via adapter

Scope of supply: Peristaltic pump rotarus^® volume, power supply, connection cable EU, UK, US, external control unit

Specifications	rotarus® volume 50 // rotarus® volume 100
Speed range:	0.2 ... 100 min-1 // 5 ... 500 min-1
Flow rate range:	0.0001 ... 1500 ml/min // 0.0036 ... 5400 ml/min (depending on pump head)
Working temperature range:	-4 ... 40 °C
Weight: Power supply:	7.3 kg // 10.1 kg 100 ... 240 V, 50/60 Hz

Accessories Pump heads rotarus® Accessories Rotary piston pump heads for rotarus® pumps Accessories Accessories for rotarus® peristaltic pumps

Feed pump for reproducible results. The speed is adjustable with the analog control knob and the electronic speed control guarantees constant speeds even under changing loads

• Speed, direction of rotation and on / off function is controllable with an analog interface
• Smooth start operation prevents from spills and splashing media
• A press of the max button accelerates the filling and draining of the tubing
• For safety in unattended continuous operation, the motor will be switched off in case of an overload situation to prevent overheating
• Optional footswitch to operate pump drive in closed fume hoods and to facilitate filling operations
• Pump heads with convex rollers for cell protection are available for use in cell biology

The pump head is not included. Please order separately.
With an optional pump head adapter the Hei-FLOW Advantage 01 can be upgraded for multi-channel operation.

Specifications
Control accuracy motor:	± 0.5 %
Flow rate accuracy (water without counter pressure):	± 3.5 %
Motor power:	100 W
Analogue interface:	0 ... 10 V / 4 ...20 mA
Permissible ambient conditions:	5 ... 31 °C
Permissible rel. humidity:	80 %
Dimensions (W x D x H):	166 x 256 x 225 mm
Specifications
Speed range:	10 ... 120 rpm
Flow rates single-channel pumps:	0.38 ... 813 ml/min
Flow rates multi-channel pumps:	0.005 ... 329 ml/min
Weight:	7.6 kg

Accessories Single-channel Pump Heads SP quick for Pump drives Hei-FLOW Accessories Single-channel Pump Heads SP standard and SP vario for Pump drives Hei-FLOW Accessories Multi-channel Pumps for Pump drives Hei-FLOW Accessories Accessories for Pump Drive Hei-FLOW Alternative Analog Pump drive Hei-FLOW Core 120 Alternative Analog Pump drive Hei-FLOW Core 600 Alternative Pump drive Hei-FLOW Ultimate 120 Alternative Pump drive Hei-FLOW Ultimate 600

Feed pump for reproducible results. The speed is adjustable with the analog control knob, and the electronic speed control guarantees constant speeds even under changing loads.

• Speed, direction of rotation and on/off function is controllable with an analog interface
• A press of the max. button accelerates the filling and draining of the tubing
• For safety in unattended continuous operation, the motor will be switched off in case of an overload situation to prevent overheating
• Optional pump heads with convex rollers for cell protection are available for use in cell biology
• Optional footswitch to operate pump drive in closed fume hoods and to facilitate filling operations

The flow rate depends on the used pump head. The pump head is not included. Please order separately.
This pump drive is only suitable for use with single-channel pump heads.

Specifications
Control accuracy motor:	± 0.5 %
Flow rate accuracy (water without counter pressure):	± 3.5 %
Motor power:	100 W
Analogue interface:	0 ... 10 V / 4 ...20 mA
Permissible ambient conditions:	5 ... 31 °C
Permissible rel. humidity:	80 %
Dimensions (W x D x H):	166 x 256 x 225 mm
Specifications
Speed range:	24 ... 600 rpm
Flow rates single-channel pumps:	2.0 ... 4056 ml/min
Weight:	7.3 kg

Accessories Single-channel Pump Heads SP quick for Pump drives Hei-FLOW Accessories Single-channel Pump Heads SP standard and SP vario for Pump drives Hei-FLOW Accessories Accessories for Pump Drive Hei-FLOW Alternative Analog Pump drive Hei-FLOW Core 120 Alternative Analog Pump drive Hei-FLOW Core 600 Alternative Pump drive Hei-FLOW Ultimate 120 Alternative Pump drive Hei-FLOW Ultimate 600

Dosing and Feeding pumps for reproducible results. Flow characteristics in combination with various tubing diameters are pre-programmed for accurate flow rate numbers. With freely selectable process parameters.

• Speed, direction of rotation and on / off function is controllable with an analog interface or digital with built-in RS232 interface
• Pre-programmed flow characteristics are shown in the display
• Digital read-out of Speed, Tubing diameter, Flow rate, Dosing volume, Interval dosing, Pause function
• With buttons for selecting all process parameters
• Easy calibration of flow volume and flow rate
• Smooth start operation prevents from spills and splashing media
• A press of the max button accelerates the filling and draining of the tubing
• For safety in unattended continuous operation, the motor will be switched off in case of an overload situation to prevent overheating
• Optional foot switch to operate pump drive in closed fume hoods and to facilitate filling operations
• Pump heads with convex rollers for cell protection are available for use in cell biology

The pump head is not included. Please order separately.
This pump drive is only suitable for use with single-channel pump heads.

Specifications
Control accuracy motor:	± 0.5 %
Motor power:	100 W
Volume dosing:	0.001 ... 9999 ml
Interval dosing:	0.001 ... 9999 ml in breaks 0.1 s ... 750 h
Permissible ambient conditions:	5 ... 31 °C
Permissible rel. humidity:	80 %
Dimensions (W x D x H):	166 x 256 x 225 mm
Specifications
Speed range:	24 ... 600 rpm
Flow rates single-channel pumps:	2.0 ... 4056 ml/min
Flow rate accuracy (water without counter pressure):	± 2 %
Weight:	7.3 kg

Accessories Single-channel Pump Heads SP quick for Pump drives Hei-FLOW Accessories Single-channel Pump Heads SP standard and SP vario for Pump drives Hei-FLOW Accessories Accessories for Pump Drive Hei-FLOW Alternative Analog Pump drive Hei-FLOW Core 120 Alternative Analog Pump drive Hei-FLOW Core 600 Alternative Pump drive Hei-FLOW Advantage 01 Alternative Pump drive Hei-FLOW Expert 600

For use with all rotarus^® peristaltic pumps.
PK: With double-pivoted rollers made of high-grade, medical stainless steel. With RFID-technology for detection and monitoring of pump head and tubing.
MKF 4/8/12: With components made of anodized aluminum and stainless steel. For tubing cassettes, with lateral set screw for the adjustment of the flow rate. With RFID-technology for detection and monitoring of pump head and tubing.
PKF 60 / MKF 60: With components made of durable PPS plastics. Simple and easy loading of the tubing. For attaching the
pump heads to the rotarus^® drives a PKF/MKF 60 adapter set is required. Please order separately.

Accessories Accessories for Pump heads rotarus®

Space-saving, powerful peristaltic pump for continuous operation in various speed ranges. Flexible application due to the use of various pump heads and hoses. The most important parameters can be set quickly and easily using the control panel on the housing; the speed can be programmed directly on the unit. The connection technology of the pump heads guarantees quick handling.

• Reversible conveying direction
• Quick exchange of pump heads without the use of tools
• Calibratable
• Pump heads of other manufacturers can be used with an adapter
• White, powder-coated housing

Set with peristaltic pump and pump head. The speed and the most important parameters can be programmed directly on the housing front on a TFT touchscreen. Simple and easy loading of the tubing.

For stopper hoses, for low viscosity media. Sturdy hose cassettes with screws for precise adjustment of the delivery rate.

Scope of supply: Peristaltic pump, multi-channel pump head MKF 60-4-8, adapter set, power supply, connection cable EU, UK, US

Accessories Pump heads rotarus® Accessories Accessories for rotarus® peristaltic pumps Accessories Rotary piston pump heads for rotarus® pumps Accessories Accessories for Pump heads rotarus® Alternative Peristaltic pumps rotarus® smart

Space-saving, powerful peristaltic pump for continuous operation in various speed ranges. Flexible application due to the use of various pump heads and hoses. The most important parameters can be set quickly and easily using the control panel on the housing; the speed can be programmed directly on the unit. The connection technology of the pump heads guarantees quick handling.

• Reversible conveying direction
• Quick exchange of pump heads without the use of tools
• Calibratable
• Pump heads of other manufacturers can be used with an adapter
• White, powder-coated housing

Set with peristaltic pump and pump head. The speed and the most important parameters can be programmed directly on the housing front on a TFT touchscreen. Simple and easy loading of the tubing.

For endless hoses, for low viscosity media.

Scope of supply: Peristaltic pump, single-channel pump head PKF 60-16-3, adapter set, power supply, connection cable EU, UK, US

Accessories Pump heads rotarus® Accessories Accessories for rotarus® peristaltic pumps Accessories Rotary piston pump heads for rotarus® pumps Accessories Accessories for Pump heads rotarus® Alternative Peristaltic pumps rotarus® smart

Sensors for monitoring the maximum fill height
Sensors for monitoring the maximum fill height are used to protect against damage from overflowing vessels.
A float assembly encloses a reed contact which activates an acoustic alarm when the maximum fill height is reached, enabling the user to stop further filling in time to prevent overflow.

Sensors for monitoring the minimum fill height
Sensors for monitoring the minimum fill height are used to protect against interruption in supply or inadequate volume available in processes requiring continuous withdrawal of a liquid from a container.
They give an acoustic warning when the content of the container runs low. The sensors are available in various lengths to permit use in containers of different heights. When the liquid level in the container sinks below the set point, a float drops, opening a reed contact. An alarm warning then informs the user of the imminent risk of an empty reservoir.

• Fast and convenient tube changes
• Low pulsation due to 5 roller system
• Pump head features ball bearings
• Rollers made of stainless steel
• For tubes with a 1.6mm or 2.5mm wall thickness (wt)
• Depending on drive and tubing, the flow rate ranges from 0.38 to 3436 ml per minute

SP standard

• Recommended for standard applications
• Convex rollers do not squeeze or crush organic cell cultures
• Pump head features ball bearings
• Rollers made of stainless steel and polyamide
• For tubes with a 1.6mm or 2.5mm wall thickness (wt)
• Depending on drive and tubing, the flow rate ranges from 2.0 to 4151 ml per minute

SP vario

• Suitable for most Heidolph tubing due to adjustable roller spacing
• Convex rollers do not squeeze or crush organic cell cultures
• Pump head features ball bearings
• Rollers made of stainless steel and aluminum
• Depending on drive and tubing, the flow rate ranges from 2.0 to 4151 ml per minute

For tubing with max. wall thickness: 1.6mm

• Conical spouts
• Resistant to compression max. 4 bar
• Operating temperature 0 to 40 °C
• With PP valve ball, on request also with ball made of stainless steel or PTFE

Highly chemical resistant. Supplied per meter.

Alternative Tubing, PFA Alternative Tubing, FEP Alternative Tubing, PTFE

Transparent and flexible. Autoclavable. Shore A 56. Suitable for peristaltic pumps, for condensers, incubators, desiccators, gas lines and drain lines and for food and beverage dispensing. Resistant to most laboratory chemicals. Meets FDA and USP class VI. Supplied per meter.

• Temperature range -46 °C to 74 °C
• Vacuum range 760 mm at 23 °C to 685 mm at 60 °C
• Good tensile and tear strength
• Smooth inner surface
• Contains no BPA or phthalates

Gilson’s MINIPULS Evolution is the brand-new peristaltic pump specifically designed to meet today's customers' laboratory liquid handling needs with its modern design combining great performance, ease-of-use, flexibility and safety.

With light and kink protection.

Pulsefree dispensing pumps with excellent repeatability!

• Flow rates 1.7 to 4680 ml/min (depending on mounted pump-head)
• 5''-touch screen

Operating modes:

• Pumping by drive speed (rpm)
• Pumping by flow rate (ml/min)
• Dispensing by volume (ml)
• Dispensing by time (0.1 s up to 999 hrs)
• Dispensing by volume within a pre-set time
• Interval dispensing by volume with a pause
• Interval dispensing by time with a pause
• Setting the number of dispensing cycles
• Pause time setting (from 0.1 s up to 999 hrs)
• Back-steps for drip-free dispensing
• Reversible rotation direction (only for Cavity Style pumpheads)

Calibrating functions:

• For flow rate (ml/min)
• For dispensing volume (ml)

Specifications
Motor speed:	100 ... 4000 rpm
Speed control accuracy:	±0,1 %
Operating temperature:	0 ... 40 °C
Humidity (non-condensing):	10 ... 90 %
Interface:	RJ45 ethernet, USB, type A
Protection rating:	IP 31
Dimensions (W x D x H):	146 x 194 x 160 mm (without pump-head)
Weight:	2.6 kg (without pump-head)
Power supply:	90 ... 260 V a.c., 50 ... 60 Hz

For high precision pumping in the ml-range and below (0.0 01 to 38 ml/min). Simple Click'n'go mini tubing assembly cartridges.
Microprocessor controlled, with RS232 interface and can be calibrated. Programmable flow rates, dispensing volume and pause times. Digital LED display. For: 0.13 to 3.17mm i.d. tubing.

Programmable functions:

• ml/min
• the drive speed (rpm)
• drip-free by rolling back steps
• calibration: ml/min (flow rate); ml (volume)
• power ON/OFF

Dosing by:

• volume ml
• volume/unit time
• metering (0.1 sec to 999 hours)
• interval metering with preset pause
• selectable number of dispensing

Dimensions (W x D x H):	147 x 221 x 157 mm
Power supply:	90 ... 260 VAC
IP Code:	IP 31

Alternative Pumps, peristaltic, Reglo-Analogue Alternative Compact peristaltic pumps MS-CA

Feed pump for standard applications. The speed is adjustable with the analog control knob and stays constant even under changing loads.

• Feed direction reversible
• For safety in unattended continuous operation, the motor will be switched off in case of an overload situation to prevent overheating
• Pump heads with convex rollers for cell protection are available for use in cell biology

The flow rate depends on the used pump head. The pump head is not included. Please order separately.
Scope of supply: Pump drive, adapter for multi-channel pump heads

Dosing and Feeding pumps for reproducible results. Flow characteristics in combination with various tubing diameters are pre-programmed for accurate flow rate numbers. With freely selectable process parameters.

• Speed, direction of rotation and on / off function is controllable with an analog interface or digital with built-in RS232 interface
• Pre-programmed flow characteristics are shown in the display
• Digital read-out of Speed, Tubing diameter, Flow rate, Dosing volume, Interval dosing, Pause function
• With buttons for selecting all process parameters
• Easy calibration of flow volume and flow rate
• Smooth start operation prevents from spills and splashing media
• A press of the max button accelerates the filling and draining of the tubing
• For safety in unattended continuous operation, the motor will be switched off in case of an overload situation to prevent overheating
• Optional foot switch to operate pump drive in closed fume hoods and to facilitate filling operations
• Pump heads with convex rollers for cell protection are available for use in cell biology

The pump head is not included. Please order separately.
Scope of supply: Pump drive, pump head SP quick 1.6, 1 m silicone tubing (Ø internal 0.8 mm), 1 m Tygon^® tubing (Ø internal 0.8 mm)

Feed pump for standard applications. The speed is adjustable with the analog control knob and stays constant even under changing loads.

• Feed direction reversible
• For safety in unattended continuous operation, the motor will be switched off in case of an overload situation to prevent overheating
• Pump heads with convex rollers for cell protection are available for use in cell biology

The flow rate depends on the used pump head. The pump head is not included. Please order separately.
Scope of supply: Pump drive, pump head SP quick 1.6, 1 m silicone tubing (Ø internal 3.1 mm), 1 m Tygon^® tubing (Ø internal 3.1 mm)

Feed pump for standard applications. The speed is adjustable with the analog control knob and stays constant even under changing loads.

• Feed direction reversible
• For safety in unattended continuous operation, the motor will be switched off in case of an overload situation to prevent overheating
• Pump heads with convex rollers for cell protection are available for use in cell biology

The flow rate depends on the used pump head. The pump head is not included. Please order separately.
Scope of supply: Pump drive, pump head SP standard 2.5, 1 m silicone tubing (Ø internal 6.4 mm), 1 m Tygon^® tubing (Ø internal 6.4 mm)

Dosing and Feeding pumps for reproducible results. Flow characteristics in combination with various tubing diameters are pre-programmed for accurate flow rate numbers. With freely selectable process parameters.

• Speed, direction of rotation and on / off function is controllable with an analog interface or digital with built-in RS232 interface
• Pre-programmed flow characteristics are shown in the display
• Digital read-out of Speed, Tubing diameter, Flow rate, Dosing volume, Interval dosing, Pause function
• With buttons for selecting all process parameters
• Easy calibration of flow volume and flow rate
• Smooth start operation prevents from spills and splashing media
• A press of the max button accelerates the filling and draining of the tubing
• For safety in unattended continuous operation, the motor will be switched off in case of an overload situation to prevent overheating
• Optional foot switch to operate pump drive in closed fume hoods and to facilitate filling operations
• Pump heads with convex rollers for cell protection are available for use in cell biology

The pump head is not included. Please order separately.
Scope of supply: Pump drive, adapter for multi-channel pump heads

The digital pump drive is designed for pumping and dispensing applications in laboratory and process environments. MasterflexLive™ is a secure, cloud-enabled platform for control and monitoring of pumps.

• 5" TFT/RGB touch screen
• Operating modes: continuous run, volume dispense and timed dispense
• Easy storage and retrieve commonly used dispense programs
• Control via screen, MasterflexLive™, or analog remote control
• Internet connection via Wi-Fi or standard Ethernet
• Brushless, maintenance-free motor

The MINIPULS 3 is a rugged peristaltic pump with interchangeable heads for delivering smooth, low pulse flows of biological and chemical fluids in 1, 2, 4, or 8 channel standard flow rate and 2 or 4 channel high flow rate configurations.

Flow rates from 0.00025 to 380 ml/min. The speed can be adjusted manually or automatically through optional external control. Easy to operate.

• High torque grants the use of double channel pump heads and multiple pump heads
• Up to 8 channels
• Rich variety of pump heads
• Adjust speed manually
• Membrane keypad and rotary encoded switch, easy to operate
• Good performance and low price

Specifications
Speed:	0.1 to 100 rpm, reversible
Speed precision:	0.1rpm
Speed control:	Membrane keypad and rotary encoded switch
Display:	128 x 64 graphic LCD displays flow rate and speed (rpm)
Communication interface:	RS485
Power supply:	220 Vac ± 10%, 50/ 60 Hz, 110 Vac± 10%, 50/ 60 Hz
Power consumption:	< 50 W
Operating condition:	0 to 40 °C
Relative humidity:	< 80%
Dimensions (L x W x H in mm):	202 x 160 x 239
Drive weight (without Pump Head):	5.34 kg
IP code:	IP 31

Alternative

Transparent. Shore: 55. Fits most common peristaltic pump models, e.g. Verder, Ismatec, Watson-Marlow, IKA and Heidolph. Long working lifespan. Good resistance to acids and alkalis. Food-safe.

Alternative Peristaltic pump tubing, Tygon® LMT-55 with 3 colour-coded bridges Alternative Peristaltic pump tubing E-LFL with 2 colour-coded bridges Alternative Peristaltic pump tubing, Tygon® LMT-55 with 2 colour-coded bridges

For use in LC, LCMS and automation technology. The polyetheretherketone (PEEK) tubing are a flexible alternative to stainless steel tubing in high pressure applications. The tubing are color coded to industry standards for easy identification of the inner diameter. They are inert to most commonly used solvents. Exceptions are very caustic reagents, strong acids and bases.

• Smooth inner surface
• Good chemical resistance
• Bio-inert and biocompatible
• Operating temperature up to max. 100 °C
• Pressure stable up to 483 bar (7000 psi, 48000 kPa), size dependent

-Tube length 30.5 m

Alternative Tubing, PEEK, 10F Alternative Tubing, PEEK, 50F Alternative Tubing, PEEK, 5F

Comfortable, precise and performant peristaltic pumps for continuous operation in various speed ranges. With control of speed and flow rate. Housings are available in white powder-coating (IP54 protection) and stainless steel ("i" models, IP65 protection). With integrated RFID technology for detection of pump head and hose as well as automatic blockage detection and hose burst control. A control panel for the most important functions is integrated directly at the pump housing, the external control panel is equipped with a touch screen. The connection technology of the pump heads guarantees rapid handling.

• External control panel, detachable
• Pump drives with two different motors (50 or 100 watts) are available depending on the application, flow rate and medium
• Exchangeable pump heads in single-channel or multi-channel design (not included in scope of delivery)
• Reversible conveying direction
• Quick exchange of pump heads without the use of tools
• TFT touch screen with user-friendly menu
• Calibratable
• Integrated method memory
• Flow rate, calibration function, method memory programmable on the operating module
• USB and RS232 interface for PC connection
• Pump heads of other manufacturers can be used without difficulty via adapter

Scope of supply: Peristaltic pump rotarus^® flow, power supply, connection cable EU, UK, US, external control unit

Specifications	rotarus® flow 50 // rotarus® flow 100
Speed range:	0.2 ... 100 min-1 // 5 ... 500 min-1
Flow rate range:	0.0001 ... 1500 ml/min // 0.0036 ... 5400 ml/min (depending on pump head)
Working temperature range:	-4 ... 40 °C
Weight: Power supply:	7.3 kg // 10.1 kg 100 ... 240 V, 50/60 Hz

Accessories Pump heads rotarus® Accessories Accessories for rotarus® peristaltic pumps Accessories Rotary piston pump heads for rotarus® pumps

For high precision pumping in the ml-range and below (0.0002 to 68ml/min). Simple Click"n"go mini tubing assembly cartridges. With remote control for on/off and speed.

• speed setting: 2-99%, resolution: 1%
• power consumption 20W
• overload control
• analogue interface
• for 0.13 to 3.17mm tubing i.d.
• 3-stop, colour-coded tubing

Dimensions (W x D x H) 2-channel versions: 2-channel versions (MS-2/6-160): 4-channel versions:

100 x 178 x 143 mm 147 x 221 x 157 mm 100 x 190 x 143 mm

Alternative Pumps, peristaltic, Reglo-Digital Alternative Compact peristaltic pumps MS-CA

For use with rotarus^® peristaltic pumps.

Space-saving, powerful peristaltic pump for continuous operation in various speed ranges. Flexible application due to the use of various pump heads and hoses. The most important parameters can be set quickly and easily using the control panel on the housing; the speed can be programmed directly on the unit. The connection technology of the pump heads guarantees quick handling.

• Reversible conveying direction
• Quick exchange of pump heads without the use of tools
• Calibratable
• Pump heads of other manufacturers can be used with an adapter
• White, powder-coated housing

Scope of supply: Peristaltic pump, power supply, connection cable EU, UK, US

Exchangeable pump heads in single-channel or multi-channel designs (up to 12 channels). Please order pump heads separately.

Specifications	rotarus® smart 30 // rotarus® smart 40
Speed range:	10 ... 350 min-1 // 3 ... 200 min-1
Flow rate range:	0.0075 ... 4250 ml/min // 0.0022 ... 3000 ml/min (depending on pump head)
Working temperature range:	-4 ... 40 °C
Protection class:	IP43
Weight: Power supply:	4.4 kg // 4.7 kg 100 ... 240 V, 50/60 Hz

Accessories Pump heads rotarus® Accessories Accessories for rotarus® peristaltic pumps Accessories Rotary piston pump heads for rotarus® pumps Accessories Accessories for Pump heads rotarus®

Standard and Weighted Spectra/Por Closures provide a leak-proof seal for dialysis tubing while aiding in sample buoyancy and vertical orientation. They are available in 23, 35, 55, 75 and 90 mm sealing widths and a variety of colors for easy sample identification. Closures are autoclavable.

Shore A 64. The tubings have been formulated to withstand the rigors of peristaltic pumping action while providing the biocompatible fluid surface required in sensitive bioprocess applications. Resistant to repeated CIP and SIP cleaning and sterilization. Complies with USP Class VI and FDA and the documented biocompatibility according to standard 10993. Autoclavable.

Silicone-platinum tubing, Shore A 50. For sterile filling systems, chemistry and blood analyzers and liquid chromatography. Biocompatibility for sensitive applications. To FDA and USP Class VI, in accordance with ISO 10993.

• Temperature range -81 to 200°C
• Smooth inner surface
• High flexibility
• Ozone and UV resistant

Alternative Tubing Tygon® B-44-4X Alternative Tygon® tubing ELFL

Clear, transparent. Chemically resistant to aggressive cleaning fluids and sanitizers. Suitable for many foods and beverages. Contains no BPA or phthalates.

Alternative Tubing Tygon® 3350 Alternative Tygon® tubing ELFL

Clear, flexible, Shore A 69. Peristaltic pump tubing for condensers, incubators, desiccators, gas and drain lines, chemical transfer and for food and beverage dispensing.

• Temperature range -78 °C to 57 °C
• Chemical resistance
• Plasticizer and oil free

Premium module: The premium module comprises the inert gas inlet (only sizes 49/101), extra connectors for thermoshelves, one for VO29, two for VO49/VO101, an additional thermoshelf for model size 49/101.

Vacuum pump module: Without pump with antivibration metal plate at the bottom to accommodate the vacuum pump, including full-sight glass door, socket, signal cable and connecting hose to the vacuum oven.

Chemical-resistant vacuum pump: With 4x diaphragm, pump capacity: approx. 50 Nl/min = 3.0 m/h³, automatic purge control, with signal cable (3 m) to control the rotation speed and vacuum connecting hose (3 m).