Ovens, Furnaces

The models LV 3/11 - LVT 15/11 are especially designed for ashing in the laboratory. A special air intake and exhaust system allows air exchange of more than 6 times per minute. Incoming air is preheated to ensure a good temperature uniformity.

• Tmax 1100°C
• Heating from two sides
• Ceramic heating plates with integral heating element which is safeguarded against fumes and splashing, and easy to replace
• Insulation only made of materials that are classified as not carcinogenic acc. to TRGS 905, class 1 or 2
• Housing made of sheets of textured stainless steel
• Dual shell housing for low external temperatures and stability
• Optional flap door (LV) which can be used as work platform or lift door (LVT) with hot surface facing away from the operator
• Solid state relays provide for low noise operation
• Air exchange of more than 6 times per minute
• Good temperature uniformity due to preheating of incoming air
• 220-240 V 1/N/PE 50/60 Hz connector as standard

Option:

• Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load
• Observation hole in the oven door
• Process control and documentation via VCD software package for monitoring, documentation and control

Accessories Charging rack for ashing furnaces

The chamber furnaces are suitable for Annealing, Hardening and Brazing. The furnaces can be extended with a variety of accessories, like annealing boxes for operation under protective gas, roller guides, or a cooling station with a quench tank. Even high-performance applications like the annealing of titanium can be implemented without the use of expensive and complicated annealing systems.

• Robust insulation with light refractory bricks
• Deep furnace chamber with three-sides heating: from both side walls and bottom
• Low energy consumption due to multi-layer insulation
• Base frame included
• N 7/H - N 17/HR designed as table-top model
• Parallel guided downward swinging door (user protected from heat radiation)
• NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive
• Equipped with the B 500 programmable controller (with touch panel, 5 programmes with 4 segments each), optionally available with the C 540 controller

These powerful laboratory muffle furnaces are available for temperatures up to 1400 °C, 1500 °C, 1550 °C or 1600 °C. The durability of the SiC rods in periodic use, in combination with their high heating speed, make these furnaces the all-rounders in the laboratory. Heating times of 40 minutes to 1400 °C can be achieved, depending on the furnace
model and the conditions of use.

• Tmax 1400 °C, 1500 °C, 1550 °C or 1600 °C
• Working Temperature 1500 °C (for models LHTC ../16), increased wear and tear of heating elements must be expected in case of working at higher temperatures
• Insulation only made of materials that are classified as not carcinogenic acc. to TRGS 905, class 1 or 2
• Housing made of sheets of textured stainless steel
• Dual shell housing for low external temperatures and high stability
• Furnace room lined with durable fiber material, not classified
• Optional flap door (LHTC) which can be used as work platform or lift door (LHTCT) with hot surface facing away from the operator (HTCT 01/ only with lift door)
• Switching system with solid-state-relays, power tuned to the SiC rods
• Controller is the programmable C 550 with adjustable ramps and holding times
• Easy replacement of heating rods
• Adjustable air inlet opening, exhaust air opening in the roof
• 400 V 3/N/PE 50/60 Hz connector as standard

Option:

• Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load
• Square saggar for charging of up to three layers
• Lid for top saggar
• Manual or automatic gas supply system
• Process control and documentation via VCD software package for monitoring, documentation and control

Muffle furnaces with fibre-insulated chambers and ceramic heating plates. Suitable for thermal treatments in industry, science and medicine.

• Side, top or down-opening door depending on model
• Outer casing made of powder-coated sheet metal
• Ceramic bottom plate
• Control panel in the lower part of the oven
• Incl. door safety switch
• Fast heating time
• Good stability and temperature distribution
• Low power consumption

-With temperature controller Omron E5CC-T: programmable PID controller with 8 programmes and 32 programming segments

Alternative Muffle furnaces SNOL 3/1100, up to 1100 °C, Omron E5CC-T controller Alternative Muffle furnaces SNOL 8.2/1100, up to 1100 °C, Omron E5CC-T controller Alternative Muffle furnaces SNOL 22/1100, up to 1100 °C, Omron E5CC-T controller Alternative Muffle furnaces SNOL 39/1100, up to 1100 °C, Omron E5CC-T controller Alternative Muffle furnaces SNOL 6.7/1300, up to 1300 °C, Omron E5CC-T controller Alternative Muffle furnaces SNOL 10/1300, up to 1300 °C, Omron E5CC-T controller Alternative Muffle furnaces SNOL 13/1100, up to 1100 °C, Omron E5CC controller

Muffle furnaces with fibre-insulated chambers and ceramic heating plates. Suitable for thermal treatments in industry, science and medicine.

• Side, top or down-opening door depending on model
• Outer casing made of powder-coated sheet metal
• Ceramic bottom plate
• Control panel in the lower part of the oven
• Incl. door safety switch
• Fast heating time
• Good stability and temperature distribution
• Low power consumption

-With basic temperature controller Omron E5CC with adjustable temperature and time (not programmable)

Alternative Muffle furnaces SNOL 3/1100, up to 1100 °C, Omron E5CC controller Alternative Muffle furnaces SNOL 8.2/1100, up to 1100 °C, Omron E5CC controller Alternative Muffle furnaces SNOL 22/1100, up to 1100 °C, Omron E5CC controller Alternative Muffle furnaces SNOL 39/1100, up to 1100 °C, Omron E5CC controller Alternative Muffle furnaces SNOL 6.7/1300, up to 1300 °C, Omron E5CC controller Alternative Muffle furnaces SNOL 10/1300, up to 1300 °C, Omron E5CC controller Alternative Muffle furnaces SNOL 13/1100, up to 1100 °C, Omron E5CC-T controller

Muffle furnaces with fibre-insulated chambers and ceramic heating plates. Suitable for thermal treatments in industry, science and medicine.

• Side, top or down-opening door depending on model
• Outer casing made of powder-coated sheet metal
• Ceramic bottom plate
• Control panel in the lower part of the oven
• Incl. door safety switch
• Fast heating time
• Good stability and temperature distribution
• Low power consumption

-With temperature controller Omron E5CC-T: programmable PID controller with 8 programmes and 32 programming segments

Alternative Muffle furnaces SNOL 3/1100, up to 1100 °C, Omron E5CC-T controller Alternative Muffle furnaces SNOL 8.2/1100, up to 1100 °C, Omron E5CC-T controller Alternative Muffle furnaces SNOL 13/1100, up to 1100 °C, Omron E5CC-T controller Alternative Muffle furnaces SNOL 39/1100, up to 1100 °C, Omron E5CC-T controller Alternative Muffle furnaces SNOL 6.7/1300, up to 1300 °C, Omron E5CC-T controller Alternative Muffle furnaces SNOL 10/1300, up to 1300 °C, Omron E5CC-T controller Alternative Muffle furnaces SNOL 22/1100, up to 1100 °C, Omron E5CC controller

Muffle furnaces with fibre-insulated chambers and ceramic heating plates. Suitable for thermal treatments in industry, science and medicine.

• Side, top or down-opening door depending on model
• Outer casing made of powder-coated sheet metal
• Ceramic bottom plate
• Control panel in the lower part of the oven
• Incl. door safety switch
• Fast heating time
• Good stability and temperature distribution
• Low power consumption

-With basic temperature controller Omron E5CC with adjustable temperature and time (not programmable)

Alternative Muffle furnaces SNOL 3/1100, up to 1100 °C, Omron E5CC controller Alternative Muffle furnaces SNOL 8.2/1100, up to 1100 °C, Omron E5CC controller Alternative Muffle furnaces SNOL 13/1100, up to 1100 °C, Omron E5CC controller Alternative Muffle furnaces SNOL 39/1100, up to 1100 °C, Omron E5CC controller Alternative Muffle furnaces SNOL 6.7/1300, up to 1300 °C, Omron E5CC controller Alternative Muffle furnaces SNOL 10/1300, up to 1300 °C, Omron E5CC controller Alternative Muffle furnaces SNOL 22/1100, up to 1100 °C, Omron E5CC-T controller

Muffle furnaces with fibre-insulated chambers and ceramic heating plates. Suitable for thermal treatments in industry, science and medicine.

• Side, top or down-opening door depending on model
• Outer casing made of powder-coated sheet metal
• Ceramic bottom plate
• Control panel in the lower part of the oven
• Incl. door safety switch
• Fast heating time
• Good stability and temperature distribution
• Low power consumption

-With temperature controller Omron E5CC-T: programmable PID controller with 8 programmes and 32 programming segments

Alternative Muffle furnaces SNOL 8.2/1100, up to 1100 °C, Omron E5CC-T controller Alternative Muffle furnaces SNOL 13/1100, up to 1100 °C, Omron E5CC-T controller Alternative Muffle furnaces SNOL 22/1100, up to 1100 °C, Omron E5CC-T controller Alternative Muffle furnaces SNOL 39/1100, up to 1100 °C, Omron E5CC-T controller Alternative Muffle furnaces SNOL 6.7/1300, up to 1300 °C, Omron E5CC-T controller Alternative Muffle furnaces SNOL 10/1300, up to 1300 °C, Omron E5CC-T controller Alternative Muffle furnaces SNOL 3/1100, up to 1100 °C, Omron E5CC controller

Muffle furnaces with fibre-insulated chambers and ceramic heating plates. Suitable for thermal treatments in industry, science and medicine.

• Side, top or down-opening door depending on model
• Outer casing made of powder-coated sheet metal
• Ceramic bottom plate
• Control panel in the lower part of the oven
• Incl. door safety switch
• Fast heating time
• Good stability and temperature distribution
• Low power consumption

-With basic temperature controller Omron E5CC with adjustable temperature and time (not programmable)

Alternative Muffle furnaces SNOL 8.2/1100, up to 1100 °C, Omron E5CC controller Alternative Muffle furnaces SNOL 13/1100, up to 1100 °C, Omron E5CC controller Alternative Muffle furnaces SNOL 22/1100, up to 1100 °C, Omron E5CC controller Alternative Muffle furnaces SNOL 39/1100, up to 1100 °C, Omron E5CC controller Alternative Muffle furnaces SNOL 6.7/1300, up to 1300 °C, Omron E5CC controller Alternative Muffle furnaces SNOL 10/1300, up to 1300 °C, Omron E5CC controller Alternative Muffle furnaces SNOL 3/1100, up to 1100 °C, Omron E5CC-T controller

Muffelöfen mit faserisolierten Kammern und keramischen Heizplatten. Geeignet für thermische Behandlungen in Industrie, Wissenschaft und Medizin.

• Je nach Modell seitlich, nach oben oder nach unten öffnende Tür
• Außengehäuse aus pulverbeschichtetem Blech
• Keramische Bodenplatte
• Bedienfeld im unteren Teil des Ofens
• Inkl. Türsicherheitsschalter
• Schnelle Aufheizzeit
• Gute Stabilität und Temperaturverteilung
• Geringer Energieverbrauch

-Mit Temperaturregler Omron E5CC-T: programmierbarer PID-Regler mit 8 Programmen und 32 Programmsegmenten

Alternative Muffle furnaces SNOL 3/1100, up to 1100 °C, Omron E5CC-T controller Alternative Muffle furnaces SNOL 13/1100, up to 1100 °C, Omron E5CC-T controller Alternative Muffle furnaces SNOL 22/1100, up to 1100 °C, Omron E5CC-T controller Alternative Muffle furnaces SNOL 39/1100, up to 1100 °C, Omron E5CC-T controller Alternative Muffle furnaces SNOL 6.7/1300, up to 1300 °C, Omron E5CC-T controller Alternative Muffle furnaces SNOL 10/1300, up to 1300 °C, Omron E5CC-T controller Alternative Muffle furnaces SNOL 8.2/1100, up to 1100 °C, Omron E5CC controller

Muffelöfen mit faserisolierten Kammern und keramischen Heizplatten. Geeignet für thermische Behandlungen in Industrie, Wissenschaft und Medizin.

• Je nach Modell seitlich, nach oben oder nach unten öffnende Tür
• Außengehäuse aus pulverbeschichtetem Blech
• Keramische Bodenplatte
• Bedienfeld im unteren Teil des Ofens
• Inkl. Türsicherheitsschalter
• Schnelle Aufheizzeit
• Gute Stabilität und Temperaturverteilung
• Geringer Energieverbrauch

-Mit einfachem Temperaturregler Omron E5CC mit einstellbarer Temperatur und Zeit (nicht programmierbar)

Alternative Muffle furnaces SNOL 3/1100, up to 1100 °C, Omron E5CC controller Alternative Muffle furnaces SNOL 13/1100, up to 1100 °C, Omron E5CC controller Alternative Muffle furnaces SNOL 22/1100, up to 1100 °C, Omron E5CC controller Alternative Muffle furnaces SNOL 39/1100, up to 1100 °C, Omron E5CC controller Alternative Muffle furnaces SNOL 6.7/1300, up to 1300 °C, Omron E5CC controller Alternative Muffle furnaces SNOL 10/1300, up to 1300 °C, Omron E5CC controller Alternative Muffle furnaces SNOL 8.2/1100, up to 1100 °C, Omron E5CC-T controller

For daily laboratory use. Models with flap door or lift door available, for temperatures from 1100 °C to 1400 °C. Equipped with programmable controllers B 510 (with touch panel, 5 programmes with 4 segments each), or C 550 (with touch panel, 10 programmes with 20 segments each), L 1/12 with controller R 7 (continuous operation).

• Dual shell housing made of textured stainless steel sheets for low external temperatures and high stability
• Adjustable air inlet integrated in door
• Exhaust air outlet in rear wall of furnace
• Solid state relays provide low-noise operation
• Standard connector 230 V 1/N/PE 50/60 Hz
• 24 and 40 l with 400 V 3/N/PE 50/60 Hz

Optional:

• Chimney, chimney with fan or catalytic converter
• Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load
• Protective gas connection to purge with non-flammable protective or reaction gases (not available in combination with chimney, chimney with fan or catalytic converter)
• Manual or automatic gas supply system
• Process control and documentation via VCD software package for monitoring, documentation and control

-Ceramic heating plates with integrated heating wire, splash and exhaust protected, easy to replace

• Heating from two sides (three sides for interior volumes of 24 and 40 l)
• Flap door can be used as work platform

Alternative Muffle furnaces series LT, max. 1100 °C, with lift door Alternative Muffle furnaces series L, max. 1100 °C, with flap door, with thermoelement Z1 Alternative  Alternative Muffle furnaces series LT, max. 1100 °C, with lift door, with overtemperature limit control Alternative Muffle furnaces series LT, max. 1100 °C, with lift door, with integrated process documentation Alternative Muffle furnaces series L, max. 1200 °C, with flap door Alternative Muffle furnaces series L, max. 1400 °C, with flap door Alternative Muffle furnaces series LT, max. 1200 °C, with lift door Alternative Muffle furnaces series LT, max. 1400 °C, with lift door

For daily laboratory use. Models with flap door or lift door available, for temperatures from 1100 °C to 1400 °C. Equipped with programmable controllers B 510 (with touch panel, 5 programmes with 4 segments each), or C 550 (with touch panel, 10 programmes with 20 segments each), L 1/12 with controller R 7 (continuous operation).

• Dual shell housing made of textured stainless steel sheets for low external temperatures and high stability
• Adjustable air inlet integrated in door
• Exhaust air outlet in rear wall of furnace
• Solid state relays provide low-noise operation
• Standard connector 230 V 1/N/PE 50/60 Hz
• 24 and 40 l with 400 V 3/N/PE 50/60 Hz

Optional:

• Chimney, chimney with fan or catalytic converter
• Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load
• Protective gas connection to purge with non-flammable protective or reaction gases (not available in combination with chimney, chimney with fan or catalytic converter)
• Manual or automatic gas supply system
• Process control and documentation via VCD software package for monitoring, documentation and control

-Ceramic heating plates with integrated heating wire, splash and exhaust protected, easy to replace

• Heating from two sides (three sides for interior volumes of 24 and 40 l)
• Flap door can be used as work platform

Alternative Muffle furnaces series LT, max. 1100 °C, with lift door Alternative Muffle furnaces series L, max. 1100 °C, with flap door Alternative Muffle furnaces series L, max. 1100 °C, with flap door, with thermoelement Z1 Alternative  Alternative Muffle furnaces series LT, max. 1100 °C, with lift door, with overtemperature limit control Alternative Muffle furnaces series LT, max. 1100 °C, with lift door, with integrated process documentation Alternative Muffle furnaces series L, max. 1400 °C, with flap door Alternative Muffle furnaces series LT, max. 1200 °C, with lift door Alternative Muffle furnaces series LT, max. 1400 °C, with lift door

Compact muffle furnaces with dual shell furnace housing of rust-free stainless steel and heating elements encased in quartz glass tubes.

• Tmax 1100 °C, working temperature 1050 °C
• Heating from two sides from heating elements in quartz glass tubes
• Maintenance-friendly replacement of heating elements and insulation
• Insulation only made of materials that are classified as not carcinogenic acc. to TRGS 905, class 1 or 2
• Housing made of sheets of textured stainless steel
• Dual shell housing for low external temperatures and high stability
• Flap door which can also be used as a work platform
• Exhaust air outlet in rear wall
• Compact dimensions and light weight
• Controller mounted under the door to save space
• Equipped with the basic controller R 7 with one free storeable temperature, which is dwelled until the controller is switch off
• Standard power supply 230 V, 1/N/PE, 50/60 Hz

For daily laboratory use. Models with flap door or lift door available, for temperatures from 1100 °C to 1400 °C. Equipped with programmable controllers B 510 (with touch panel, 5 programmes with 4 segments each), or C 550 (with touch panel, 10 programmes with 20 segments each), L 1/12 with controller R 7 (continuous operation).

• Dual shell housing made of textured stainless steel sheets for low external temperatures and high stability
• Adjustable air inlet integrated in door
• Exhaust air outlet in rear wall of furnace
• Solid state relays provide low-noise operation
• Standard connector 230 V 1/N/PE 50/60 Hz
• 24 and 40 l with 400 V 3/N/PE 50/60 Hz

Optional:

• Chimney, chimney with fan or catalytic converter
• Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load
• Protective gas connection to purge with non-flammable protective or reaction gases (not available in combination with chimney, chimney with fan or catalytic converter)
• Manual or automatic gas supply system
• Process control and documentation via VCD software package for monitoring, documentation and control

-Ceramic heating plates with integrated heating wire, splash and exhaust protected, easy to replace

• Heating from two sides (three sides for interior volumes of 24, 40 and 60 l)
• The hot side of the lift door is facing away from the operator

Alternative Muffle furnaces series L, max. 1100 °C, with flap door, with thermoelement Z1 Alternative  Alternative Muffle furnaces series LT, max. 1100 °C, with lift door, with overtemperature limit control Alternative Muffle furnaces series LT, max. 1100 °C, with lift door, with integrated process documentation Alternative Muffle furnaces series L, max. 1100 °C, with flap door Alternative Muffle furnaces series L, max. 1200 °C, with flap door Alternative Muffle furnaces series L, max. 1400 °C, with flap door Alternative Muffle furnaces series LT, max. 1200 °C, with lift door Alternative Muffle furnaces series LT, max. 1400 °C, with lift door

For daily laboratory use. Models with flap door or lift door available, for temperatures from 1100 °C to 1400 °C. Equipped with programmable controllers B 510 (with touch panel, 5 programmes with 4 segments each), or C 550 (with touch panel, 10 programmes with 20 segments each), L 1/12 with controller R 7 (continuous operation).

• Dual shell housing made of textured stainless steel sheets for low external temperatures and high stability
• Adjustable air inlet integrated in door
• Exhaust air outlet in rear wall of furnace
• Solid state relays provide low-noise operation
• Standard connector 230 V 1/N/PE 50/60 Hz
• 24 and 40 l with 400 V 3/N/PE 50/60 Hz

Optional:

• Chimney, chimney with fan or catalytic converter
• Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load
• Protective gas connection to purge with non-flammable protective or reaction gases (not available in combination with chimney, chimney with fan or catalytic converter)
• Manual or automatic gas supply system
• Process control and documentation via VCD software package for monitoring, documentation and control

-Ceramic heating plates with integrated heating wire, splash and exhaust protected, easy to replace

• Heating from two sides (three sides for interior volumes of 24, 40 and 60 l)
• Lift door with hot surface facing away from the operator

Alternative Muffle furnaces series LT, max. 1100 °C, with lift door Alternative Muffle furnaces series L, max. 1100 °C, with flap door Alternative Muffle furnaces series L, max. 1200 °C, with flap door Alternative Muffle furnaces series L, max. 1100 °C, with flap door, with thermoelement Z1 Alternative  Alternative Muffle furnaces series LT, max. 1100 °C, with lift door, with overtemperature limit control Alternative Muffle furnaces series LT, max. 1100 °C, with lift door, with integrated process documentation Alternative Muffle furnaces series L, max. 1400 °C, with flap door Alternative Muffle furnaces series LT, max. 1400 °C, with lift door

For individual and series incineration of solids and liquids. Upper platform with 8 openings of 34mm diameter, for porcelain crucibles up to 50mm diameter. Upper platform and housing made of stainless steel. With 120 minute timer with audible signal after timed period and separate continuous operation switch. A safety switch switches the mains supply off / on automatically on opening / closing the incinerator chamber. With 1.5 metre cable and earthed plug.

Type SVR/E
With electronic temeprature control which allows stepless heating adjustment from 10 to 100%. Complete for use.

Type SVD 95
With digital temperature adjustment and display. Complete for use.

These compact tube furnaces with integrated control systems can be used universally for many processes. Equipped with a standard working tube of C 530 ceramic and two fiber plugs, these tube furnaces have an unbeatable price/performance ratio.

• Tmax 1200 °C or 1300 °C
• Single-zoned design as standard
• Dual shell housing made of sheets of textured stainless steel
• Outer tube diameter of 50 to 170 mm, heated length from 250 to 1000 mm
• Working tube of C 530 ceramic including two fiber plugs as standard equipment
• Solid state relays provide for lownoise operation
• Available with the programmable controllers B 510, C 550 and P 580 (for three-zoned design) with adjustable ramps and hold times
• Standard power supply 400 V 3/N/PE 50/60 Hz (R 50/250 und R 50/500: 220 V, 1/N/PE, 50/60 Hz)

Option:

• Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load
• Charge control with temperature measurement in the working tube and in the furnace chamber outside the tube
• Three-zoned design (heated length from 500 mm)
• Working tubes
• Gas supply systems for protective gas or vacuum operation
• Process control and documentation with VCD software package

These compact tube furnaces are used when laboratory experiments must be performed horizontally, vertically, or at specific angles. The ability to configure the angle of tilt and the working height, and their compact design, also make these tube furnaces suitable for integration into existing process systems.

• Vertical or horizontal operation freely adjustable
• Working height freely adjustable
• Working tube made of C 530 ceramic
• Control system integrated in furnace base
• NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive
• Equipped with the programmable controller B 510 (with touch panel, 5 programmes with 4 segments each), optionally available with the C 550 controller (with touch panel, 10 programmes with 20 segments each)

Specifications
Power input:	1800 W
Power supply:	230 V, 1/N/PE, 50/60 Hz

Ashing furnaces with muffle chamber made of ceramic fibres and exhaust chimney. Suitable for applications in industry, science and medicine.

• Side, top or down-opening door depending on model
• Outer casing made of powder-coated sheet metal
• Exhaust chimney with fan
• Control panel in the lower part of the oven
• Incl. door safety switch
• Fast heating time
• Good stability and temperature distribution
• Low power consumption

-With basic temperature controller Omron E5CC with adjustable temperature and time (not programmable)

Alternative Ashing furnaces SNOL 10/1300, up to 1300 °C, Omron E5CC-T controller Alternative Ashing furnaces SNOL 3/1100, up to 1100 °C, Omron E5CC controller Alternative Ashing furnaces SNOL 8.2/1100, up to 1100 °C, Omron E5CC controller Alternative Ashing furnaces SNOL 13/1100, up to 1100 °C, Omron E5CC controller Alternative Ashing furnaces SNOL 22/1100, up to 1100 °C, Omron E5CC controller Alternative Ashing furnaces SNOL 39/1100, up to 1100 °C, Omron E5CC controller Alternative Ashing furnaces SNOL 6.7/1300, up to 1300 °C, Omron E5CC controller

Ashing furnaces with muffle chamber made of ceramic fibres and exhaust chimney. Suitable for applications in industry, science and medicine.

• Side, top or down-opening door depending on model
• Outer casing made of powder-coated sheet metal
• Exhaust chimney with fan
• Control panel in the lower part of the oven
• Incl. door safety switch
• Fast heating time
• Good stability and temperature distribution
• Low power consumption

-With temperature controller Omron E5CC-T: programmable PID controller with 8 programmes and 32 programming segments

Alternative Ashing furnaces SNOL 10/1300, up to 1300 °C, Omron E5CC controller Alternative Ashing furnaces SNOL 3/1100, up to 1100 °C, Omron E5CC-T controller Alternative Ashing furnaces SNOL 8.2/1100, up to 1100 °C, Omron E5CC-T controller Alternative Ashing furnaces SNOL 13/1100, up to 1100 °C, Omron E5CC-T controller Alternative Ashing furnaces SNOL 22/1100, up to 1100 °C, Omron E5CC-T controller Alternative Ashing furnaces SNOL 39/1100, up to 1100 °C, Omron E5CC-T controller Alternative Ashing furnaces SNOL 6.7/1300, up to 1300 °C, Omron E5CC-T controller

Ashing furnaces with muffle chamber made of ceramic fibres and exhaust chimney. Suitable for applications in industry, science and medicine.

• Side, top or down-opening door depending on model
• Outer casing made of powder-coated sheet metal
• Exhaust chimney with fan
• Control panel in the lower part of the oven
• Incl. door safety switch
• Fast heating time
• Good stability and temperature distribution
• Low power consumption

-With temperature controller Omron E5CC-T: programmable PID controller with 8 programmes and 32 programming segments

Alternative Ashing furnaces SNOL 13/1100, up to 1100 °C, Omron E5CC controller Alternative Ashing furnaces SNOL 3/1100, up to 1100 °C, Omron E5CC-T controller Alternative Ashing furnaces SNOL 8.2/1100, up to 1100 °C, Omron E5CC-T controller Alternative Ashing furnaces SNOL 22/1100, up to 1100 °C, Omron E5CC-T controller Alternative Ashing furnaces SNOL 39/1100, up to 1100 °C, Omron E5CC-T controller Alternative Ashing furnaces SNOL 6.7/1300, up to 1300 °C, Omron E5CC-T controller Alternative Ashing furnaces SNOL 10/1300, up to 1300 °C, Omron E5CC-T controller

Ashing furnaces with muffle chamber made of ceramic fibres and exhaust chimney. Suitable for applications in industry, science and medicine.

• Side, top or down-opening door depending on model
• Outer casing made of powder-coated sheet metal
• Exhaust chimney with fan
• Control panel in the lower part of the oven
• Incl. door safety switch
• Fast heating time
• Good stability and temperature distribution
• Low power consumption

-With basic temperature controller Omron E5CC with adjustable temperature and time (not programmable)

Alternative Ashing furnaces SNOL 13/1100, up to 1100 °C, Omron E5CC-T controller Alternative Ashing furnaces SNOL 3/1100, up to 1100 °C, Omron E5CC controller Alternative Ashing furnaces SNOL 8.2/1100, up to 1100 °C, Omron E5CC controller Alternative Ashing furnaces SNOL 39/1100, up to 1100 °C, Omron E5CC controller Alternative Ashing furnaces SNOL 22/1100, up to 1100 °C, Omron E5CC controller Alternative Ashing furnaces SNOL 6.7/1300, up to 1300 °C, Omron E5CC controller Alternative Ashing furnaces SNOL 10/1300, up to 1300 °C, Omron E5CC controller

Ashing furnaces with muffle chamber made of ceramic fibres and exhaust chimney. Suitable for applications in industry, science and medicine.

• Side, top or down-opening door depending on model
• Outer casing made of powder-coated sheet metal
• Exhaust chimney with fan
• Control panel in the lower part of the oven
• Incl. door safety switch
• Fast heating time
• Good stability and temperature distribution
• Low power consumption

-With temperature controller Omron E5CC-T: programmable PID controller with 8 programmes and 32 programming segments

Alternative Ashing furnaces SNOL 22/1100, up to 1100 °C, Omron E5CC controller Alternative Ashing furnaces SNOL 3/1100, up to 1100 °C, Omron E5CC-T controller Alternative Ashing furnaces SNOL 8.2/1100, up to 1100 °C, Omron E5CC-T controller Alternative Ashing furnaces SNOL 13/1100, up to 1100 °C, Omron E5CC-T controller Alternative Ashing furnaces SNOL 39/1100, up to 1100 °C, Omron E5CC-T controller Alternative Ashing furnaces SNOL 6.7/1300, up to 1300 °C, Omron E5CC-T controller Alternative Ashing furnaces SNOL 10/1300, up to 1300 °C, Omron E5CC-T controller