Bags, Foils

The LABSOLUTE® dishes are made from aluminium and exhibit a stable form. All models have a smooth bottom which guarantees a safe standing. They can be used in direct contact with food.

LABSOLUTE® SEAL is the stretchable and moisture-proof sealing film that adapts effortlessly to any surface. LABSOLUTE® SEAL protects against moisture loss while allowing gas permeability. Ideal for use in the laboratory with beakers, bottles, tubes, petri dishes and much more.

LABSOLUTE® SEAL sealing film is resistant to polar substances, inorganic acids and alkaline solutions for up to 48 hours.
The sealing film can be used in a temperature range from -80°C to 90°C.

The LABSOLUTE® sample bags are made from tear-proof, transparent LDPE and have a common but safe pressure seal.

With euro hole for easy hang up.

The LABSOLUTE® sample bags are made from tear-proof, transparent LDPE and have a common but safe pressure seal.

With labelling field for fast and clear marking.

The LABSOLUTE® aluminium foils are made from an alloy of pure aluminium (>98 %).

• Can be used in direct contact with food
• Oxygen gas and water vapor tight
• Resistant to fat, moisture and water
• Heat-resistant, fireproof and non-flammable
• Resistant to most chemicals
• Available in different lengths, widths and strengths
• Refilling of dispenser boxes with large rolls possible

The LABSOLUTE® aluminium foils are made from an alloy of pure aluminium (>98 %).

• Can be used in direct contact with food
• Oxygen gas and water vapor tight
• Resistant to fat, moisture and water
• Heat-resistant, fireproof and non-flammable
• Resistant to most chemicals
• Available in different lengths, widths and strengths
• Refilling of dispenser boxes with large rolls possible

The LABSOLUTE® laboratory mat is the ideal protection of surfaces from liquids, heat and wear. The mat is made of food-grade, flexible silicone with a raised lip around the edge.

• Reversible with a blue and white site
• Integrated metal strip prevents the rolling of magnetic stirring bars
• Raised lip holds back up to 300 ml of liquid
• Autoclavable at 121 °C for 15 min
• Protects surfaces from hot objects up to 200 °C
• Anti-skid and noise dampening
• Reusable and environmentally friendly
• Compact storage by rolling up the mat

The double-layered surface protector from LABSOLUTE® is ideally suited to protect all working surfaces from chemicals and radioactive, corrosive and toxic substances. The upper layer is made of 100 % cellulose which is highly absorbent. The bottom layer made of PE provides high tear resistance and prevents liquids leaking through in order to protect work surfaces from contamination.

• Dimensions (W x D): 460 x 570 mm
• Thickness: 0.24 mm
• Weight: 125 g/m²

The LABSOLUTE® round discs made from pure aluminium are delivered with tissue paper liner.

The LABSOLUTE® aluminium foils are made from an alloy of pure aluminium (>98 %).

• Can be used in direct contact with food
• Oxygen gas and water vapor tight
• Resistant to fat, moisture and water
• Heat-resistant, fireproof and non-flammable
• Resistant to most chemicals
• Available in different lengths, widths and strengths
• Refilling of dispenser boxes with large rolls possible

Transparent. PE. With rim channel seal that can be opened and closed repeatedly.

Transparent. PE. With rim channel seal that can be opened and closed repeatedly, and write-on patch.

Transparent. PE. Without seal.

DescProtect is a durable paper which quickly absorbs liquid spills. The PE-coated base layer stops liquids reaching the work surface.

• Stays flat, does not ripple or curl to de-stabilise vessels
• White surface can be written on using pens or pencils
• Rapid absorption of liquid spills
• Excellent fluid protection
• No contamination of work surfaces or laboratory cabinets
• Suitable for school laboratories, wet chemistry, industry

• Layer 1: Highly absorbent carrier paper, sucks up spilled toxic or radioactive liquids quickly
• Layer 2: Wetness impermeable polyethylene layer, protection for lab workbenches, trays or chemical cabinets
• Additional advantages: impermeable cover in animal cages, ideal in humidity chambers for atmospheric regulation

DescProtect is a durable paper which quickly absorbs liquid spills. The PE-coated base layer stops liquids reaching the work surface.

• Stays flat, does not ripple or curl to de-stabilise vessels
• White surface can be written on using pens or pencils
• Rapid absorption of liquid spills
• Excellent fluid protection
• No contamination of work surfaces or laboratory cabinets
• Suitable for school laboratories, wet chemistry, industry

• Layer 1: Highly absorbent carrier paper, sucks up spilled toxic or radioactive liquids quickly
• Layer 2: Wetness impermeable polyethylene layer, protection for lab workbenches, trays or chemical cabinets
• Additional advantages: impermeable cover in animal cages, ideal in humidity chambers for atmospheric regulation

Extra-strong foil. PVDC-based. Good barrier properties protects the user against contact with dangerous substances (e.g. ethidium bromide or contaminated isotopes) from the sealed material and it is therefore suitable for covering sequencing gels in Electrophoresis applications.

• Does not stick, easy to unravel
• With cutter
• Non-flammable
• Self-extinguishing
• Microwaveable

Can be stretched up to 200 % and clings around irregular shapes and surfaces. Parafilm^® M is resistant to many polar substances such as saline solutions, inorganic acids and alkaline solutions for up to 48 hours (After this time it may become brittle).

Polar One. With tear-resistant seam.

Suitable for many laboratory applications. Resistant to liquids and gases. Ideal for sealing and wrapping of bottles and flasks. Good thermal conductivity, heat resistant.

Filterless blender bag for all laboratory applications in sample preparation.

• No contact between the sample and the blender during homogenisation
• Polysilk^®: Polyolefin complex
• Flexible and transparent
• Compatible with all homogenisers
• Sterile and approved for food contact

• Easy to use and better adhesion
• Our best freshness protection
• Slight initial determination
• Very easy to roll
• Particularly strong
• With time beginning Finder
• Tear-off cap box with stable
• Role of fixation for easy rolling

Suitable for many laboratory applications. Resistant to liquids and gases. Ideal for sealing and wrapping of bottles and flasks. Good thermal conductivity, heat resistant.

White. Labmat™ Bench Liner speeds clean-up and safeguards work surfaces from stains, spills and wear. Highly absorbent upper surface. Flexible polyethylene film backing is non-skid and prevents soak-through of most solutions. Simply roll up and discard after contamination.

Made from natural agglomerated cork which can be easily cleaned. Non-allergenic, anti-fungal, anti-bacterial and antistatic material. Heat and erosion resistant and also reduces noise and vibration.

Transparent. PE.

Embossed pure aluminium foils, extremely tare resistent.

• Handy for everyday use
• Heat-resistant up to 600°C
• Air-tight and a barrier to light
• Dimensions (sheet): 230 mm x 270 mm
• 200 sheets in a box

Interleaved with tissue paper. Foil thickness 0.03 mm.

• Non-slip
• Withstands temperatures up to 260 °C
• Available in black or red

Suitable for many laboratory applications. Resistant to liquids and gases. Ideal for sealing and wrapping of bottles and flasks. Good thermal conductivity, heat resistant.

For environmental surface sampling of work areas and equipment. The natural cellulose dry sponge is free of bactericides and has been tested to be non-inhibitory.

Suitable for many laboratory applications. Resistant to liquids and gases. Ideal for sealing and wrapping of bottles and flasks. Good thermal conductivity, heat resistant.

The upper side consists of a particularly absorbent filter paper, the lower side is a non-permeable, chemically resistant PE layer. This combination makes Benchkote into a protective paper with a particularly high wet strength for universal use, helping to meet the requirements of Good Laboratory Practice (GLP):

• Completely absorbs escaped liquids
• Prevents spills from reaching the workbench
• Protects against contamination

• Surface protection for lab workbenches, trays or chemical cabinets
• Contamination protection, e. g. in isotope or bacteriological labs
• Adsorption of toxic or radioactive substances
• Hygienic protection in animal cages
• Atmospheric regulation in humidity chambers

The upper side consists of a particularly absorbent filter paper, the lower side is a non-permeable, chemically resistant PE layer. This combination makes Benchkote into a protective paper with a particularly high wet strength for universal use, helping to meet the requirements of Good Laboratory Practice (GLP):

• Completely absorbs escaped liquids
• Prevents spills from reaching the workbench
• Protects against contamination

• Surface protection for lab workbenches, trays or chemical cabinets
• Contamination protection, e. g. in isotope or bacteriological labs
• Adsorption of toxic or radioactive substances
• Hygienic protection in animal cages
• Atmospheric regulation in humidity chambers

Paper with PE backing. Absorbs 750 ml/m². With a skid-resistant, waterproof, chemical-resistant polyethylene backing that makes spill containment easy. Thousands of Thirsty Cells™ quickly absorb spills and cushion breakable labware. Use as a tray, drawer or shelf liner or to wipe up spills.

An ideal Sealing Tape for Petri Dishes, Microplates, Lids, Caps and other Lab Items.
Tape stretches, conforms and seals the irregular perimeter of microtiter plates and petri dishes. Tape and adhesive resist most solvents and caustic agents. Seal remains flexible in moderate freezer temperatures and withstands intermittent exposure to 100°C.
Waterproof.

The lab mats are an economical solution to help keep benchtops clean and safe from stains, spills and wear. Stain resistant washable surface, which can easily be cleaned using any standard disinfectant and is even autoclavable at 121 °C for 15 minutes. The mat can also be rolled up for compact storage. This lab mats can be used with instruments such as centrifuges, vortex mixers, stirrers, and so much more. It offers a large working surface. Food-safe.

• Anti-skid, which helps to keep items with harsh chemicals and delicate glassware in place
• Noise dampening, reducing sound from the vibration of common benchtop equipment.
• Area with internal metal inserts to store magnet bars from magnetic stirrers
• Lip design around the outer edge, that helps contain spillage that may occur when in use
• Protects countertops from hot items up to 200 °C

Suitable for many laboratory instruments. The disposable bags are used for simple and effective wrapping of sterilization goods that are visible through the transparent PET / CPP film. With the self-sealing strip they can be closed safely and quickly.

• Intended for steam and EO gas sterilization
• With two colour indicators
• Robust, durable material
• Wide, self-sealing strip
• Thumb notch for easy opening
• ISO 17665-06 and ISO 11135 conform

The absorbent paper is coated with polyethylene on one side. Liquids are effectively absorbed and can be disposed with the paper, the surface under the paper stays clean.

The absorbent paper is coated with polyethylene on one side. Liquids are effectively absorbed and can be disposed with the paper, the surface under the paper stays clean.

Adhesive sealers are an interesting alternative to heat sealing systems or CapMats. They are easy to use and there is a lower risk of cross-contamination because they are used as disposable products.

Properties:

• Free of detectable DNase, RNase, human DNA
• Non-Pyrogenic
• Highly transparent film with minimal autofluorescence
• Ideal for Real Time PCR
• Self-adhesive
• Consists of a 500 µm thick polypropylene film coated with a highly transparent acrylate adhesive
• The strongly adhering acrylate adhesive provides a reliable sealing of the microplate, thereby minimising evaporation but without influencing the PCR reactions or the flourescence measurements
• With external dimensions of 141.3 mm x 79.3 mm, it covers PCR microplates with a skirt and all other microplates with a standard microplate footprint
• Protruding extra film can be removed without problem with a double perforation

Blender bag with non-woven side filter for all microbiological laboratory applications. The filters inserted in the bags filter the liquid during sample preparation (washing process) and retain sample particles.

• No contact between the sample and the blender during homogenisation
• Multilayer^®, multicoated reinforced complex
• Rigid and transparent
• For all types of sample (fibrous, pasty, etc.)
• Compatible with all homogenisers
• Sterile and approved for food contact

• Closure 100 % metal-free
• Practical, resealable pipette access in the lower part of the bag makes working easier

LabSorb is two-layered: The top layer is a quality filter paper to enable rapid absorption of spilt liquids. The bottom layer is polyethylene-coated and protects the surface underneath from contamination and damage.

The upper side consists of a particularly absorbent filter paper, the lower side is a non-permeable, chemically resistant PE layer. This combination makes Benchkote into a protective paper with a particularly high wet strength for universal use, helping to meet the requirements of Good Laboratory Practice (GLP):

• Completely absorbs escaped liquids
• Prevents spills from reaching the workbench
• Protects against contamination

• Surface protection for lab workbenches, trays or chemical cabinets
• Contamination protection, e. g. in isotope or bacteriological labs
• Adsorption of toxic or radioactive substances
• Hygienic protection in animal cages
• Atmospheric regulation in humidity chambers

Blender bag with non-woven side filter for all microbiological laboratory applications. The filters inserted in the bags filter the liquid during sample preparation (washing process) and retain sample particles.

• No contact between the sample and the blender during homogenisation
• Multilayer^®, multicoated reinforced complex
• Rigid and transparent
• For all types of sample (fibrous, pasty, etc.)
• Compatible with all homogenisers
• Sterile and approved for food contact

Blender bag with non-woven side filter for all microbiological laboratory applications. The filters inserted in the bags filter the liquid during sample preparation (washing process) and retain sample particles.

• No contact between the sample and the blender during homogenisation
• Multilayer^®, multicoated reinforced complex
• Rigid and transparent
• For all types of sample (fibrous, pasty, etc.)
• Compatible with all homogenisers
• Sterile and approved for food contact

• Closure 100 % metal-free

Adhesive sealers are an interesting alternative to heat sealing systems or CapMats. They are easy to use and there is a lower risk of cross-contamination because they are used as disposable products.

Properties:

• Gas-permeable, piercable membrane coated with acrylate adhesive
• Ideal for cultivating bacteria, yeast or cells in microplates
• Consists of heat-sealed rayon fibres
• The pore size varies between 10 µm and 50 µm
• The pores are layered in such a way that the membrane acts as a filter, reliably ensuring that the contents of the wells are protected against airbone bacteria, while maintaining optimal oxygen supply