Pure and ultra-pure water

Suitable for all model variants.

The Smart2Pure™ 12 can be additionally equipped with a 30 l or 60 l storage reservoir. For safe and practical storage of pure water. Made of polyethylene, opaque. Large opening for easy and effective cleaning.

Optionally, the storage reservoirs can be equipped with a UV lamp unit, CO₂ absorber and sterile filter (0.2 µm), as well as a wall mounting bracket. Please order separately.

UV replacement lamp suitable for all UV and UF/UV models.

Bracket for space-saving storage of water treatment systems on a wall. Suitable for all model variants and permeate flow rates.

With 3 m long cable for connection to a the water system reservoir. Inclusing 0.2 µm final filter.

For use with Pacific™ TII models, the optional storage reservoirs must be equipped with a pressure pump.

Analog conductivity meter for easy and reliable conductivity measurement of pure water. Analogue display of measurement value in µS/cm.

Scope of delivery: Measuring cell and set of two 1.5 m hoses.

Model P 2/30 SK.
With analogue display 0 to 30µS/cm and connector coupling. With quick couplings and integrated cell (c=0.2).

Model P2/30.
With analogue display 0 to 30µS/cm and threaded connections. With screw connections 3/4" and integrated cell (c=0.2).

Model P1/50 WA
With analogue display, measuring range 0 to 50µS/cm, potential free switching contact (value free selectable), for wall mounting. Cell not included. Please order separately.

Model LFW 200.
With digital display 0.1 to 199.9µS/cm. With potential free switching contact (adjustable value), malfunction alarm indicator, connections for solenoid valve, K = 0.2 cell with or without temperature compensation (Pt 500) and reservoir float switch with external indication. Designed for wall mounting. Cell not included. Please order separately.

behropur^® mixed-bed ion exchangers deliver de-ionized water according to Grade 3 of the ISO 3696 standard, -Water for analytical laboratory use;
Specification and test methods.
The resins inside the behropur^® ion exchangers are of certified quality.
The completely equal distribution of water inside the ion exchanger leads to the maximum utilization of the exchange capacity of the unit. Thus the user benefits from very low conductance water throughout the life cycle of each exchanger charge.
Heavy-walled, robust and practical mixed bed deioniser in blue polyethylene with free flow output to the reservoir. Also ideal for the post desalination of reverse osmosis systems or for aquariums.

• Can be directly connected to the water supply and is immediately ready for operation.
• Automatic venting as water is supplied from below.
• Minimal risk of contamination due to slotted filter in the raw water inlet.
• Nozzles are durable and easy to clean. Highly resistant to abrasion or shocks.
• Extremely sturdy, heavy-duty nozzle welding by the manufacturer's own welding process.
• Resistivity meter fitted.
• B5 and B10 can also be used as wall mounted devices (wall mounting included).
• Also available with water quality cut-out and solenoid valve which engages if specified limits are exceeded and reservoir level control.
• Resistivity control available directly on the unit or remotely at any location.

Compact and secure mixed bed deionisers for small to medium-sized volumes of ultra pure water. Ideal for feeding laboratory washing machines, general requirements in the laboratory, low level consumption in industry and for post-treatment desalination of the output from reverse osmosis systems.

• Optimal utilisation of the deioniser due to totally uniform water distribution in the resin chamber.
• Can be connected directly to the raw water mains without a pressure reducer.
• Back pressure resistant.
• Also available with water quality cut-out and solenoid valve, which engages if specified limits are exceeded, and reservoir level control.
• Resistivity control available directly on the unit or remotely at any location.

Druckfeste (bis 10 bar) Ionenaustauscher-Patronen aus Edelstahl zur einfachen und kostengünstigen Produktion von vollentsalztem Wasser. Ideal zur Versorgung von Reinstwasser-Systemen, Spülmaschinen, Autoklaven, Sterilisatoren, Klimageräten, Dampfkesseln etc. sowie für allgemeine Laboranwendungen.

Filter for pressure-resistant behropur^® mixed-bed ion exchangers. Transparent casing. Once added to the ion exchanger, it completely retains even the finest particles and protects your high-quality equipment. Due to the transparent casing of the FG 130, you can see the state of the filter insert at any time and at a glance.
Depending on the requirements, you can use a universal filter (5µ) or a carbon filter (20µ). Downstream filters may only be used on pressure-resistant behropur^® ion exchangers. Pressure-free exchangers are destroyed by the counter pressure. It could also subsequently result in expensive damage.
FG 130 behropur^® filter housing for filter inserts with a length of 5". Transparent casing made of PP. Connections ¾", maximum operating pressure 8bar, max. temp. 50°C
FE 130 behropur^® filter insert, PP, 5µ, length 5", max. pressure 6bar, max. temp. 80°C
AF 130 behropur^® filter insert, carbon, 20µ, length 5", max. pressure 6bar, max. temp. 50°C

Pressure resistant stainless steel cartridge, specifically for laboratory applications, with a particularly high capacity and flow rates of up to 1000 litres an hour. The flow system ensures a fast and effective flow through the mixed-bed system with ion-exchange resins.

• With hard rubber carrying handles
• Capacity at 10° total dissolved solids

Standard cartridge made of V4A stainless steel for general purpose application: To supply laboratory glassware washers, for general laboratory maintenance and for small industrial consumers. For subsequent demineralization of reverse osmosis systems.

• pressure resistant to 10 bar / 8 bar at E40dA
• optimum exploitation of the ion exchanger capacity due to absolute uniform water distribution in the unit
• flow rates up to 700 litres/hour
• the unique behropur^® jet nozzle system distributes the raw water over the entire resin bed. This ensures an optimum exchange capacity and quality
• can be connected to the raw water network directly and without a pressure reducer
• resistant to alternating pressure
• hard rubber collars vulcanized to the base and top of the unit offer effective protection
• convenient transport thanks to the handles embedded into the top part of the unit
• conductivity is controlled directly on the unit (installed measuring equipment) or with remote location meter
• Also available with shut-off when the limit value is reached and limit control

The Thermo Scientific Barnstead Smart2Pure system is a compact system which converts tap water into ASTM type I and II water. The Smart2Pure models 3 and 6 are featured with an built-in 6 l tank to store the type II water. The Smart2Pure 12 offers the choice between a 30 l or 60 l tank depending on storage requirements. A variety of innovative expansion options, such as UV-lamp with wavelenghts 185/254 nm and a backwashable ultrafilter with a flow rate up to 0.6 l/min, ensure optimal supply for all analytical and life science applications. A swiveling display and the easy filter change make the Smart2Pure the perfect laboratory water unit for the small demand.

Product features:

• Easy and economical change of consumables due to separately exchangeable high-tech reprocessing cartriges
• Guaranteed pure water quality: Recirculation pump and sterile ventilation filter protect from contamination and ensure a tank water quality from 10 up to 15 MW x cm
• Additional pressure outlet on the ultrapure water tank for supplying downstream devices (e.g. autoclaves, analyser) or connection of a flexible dispenser
• The scope of supply includes all necessary materials for the first-time operation (for Smart2Pure12 a storage tank must be supplemented)
• Optional hand dispenser with 3 m flexible circulation line for remote dispensing of the water. The kit contains a 0.2 µm end filter

The Thermo Scientific Barnstead Pacific RO water purification systems are modularly designed laboratory reverse osmosis system for the production of 20L to 200L pure water from tap water. Applications include routine laboratory work: lab glassware rinsing, supplying autoclaves, water baths and incubators, preparing an diluting buffers and reagents. A 30L, 60L, or 100L polyethylene reservoir is required to store and dispense the permeate water.

Product features:
Space-saving design allows system to sit on the laboratory bench or be mounted on the wall. Simple system upgrade accommodates future pure water capacity requirements.
Reliable operation: Microprocessor control offers automatic operation with continual monitoring of all important parameters. Required filling level of the reservoir can be customized. Automatic return to operating mode ensures recirculation during periods of standstill.
Easy-to-operate clear display: Resistivity/conductivity clearly displayed on large back-lit control panel that tilts for optimum viewing. Status of current operating mode clearly indicates "production", "stand-by", "cleaning" modes. Reservoir fill-level shown as %.
Integrated feed water monitoring: Good quality feed water is a prerequisite for high purity water and extends cartridge service life.
GLP-compliant documentation: Real-time clock records system errors and faults. Ongoing data storage collects four weeks information displayed in clear text. Operating system is code-protected to prevent unauthorized changes to system settings. RS-232 interface with adjustable sender interval allows for customized timing of data transmission of measured values and faults to a PC or data printer. Cell constant of 0.16cm^-1 ensures precise conductivity measurements.
Pacific RO pretreatment: Two 10in. (25.4cm) cartridge filter housings with a 5µm prefilter and activated carbon to prevent entry of particles >5µm and high concentrations of free chlorine includes hardness stabilizer cartridge which binds calcium and prevents its precipitation.
Worry-free pure water storage: Reservoir are constructed of pigment-free polyethylene. Conical bottom allows for easy cleaning, disinfecting and complete emptying.

Optional hand dispenser with flexible circulating line for dispensing water in a distance of up to 3 m. The kit contains a 0,2 µm end filter.

The Thermo Scientific Pacific Barnstead TII system provides ultrapure water (1 - 10 MOhm) ASTM type II for typical demand up to 200 l/day. By combining different treatment technologies such as pretreatment, reverse osmosis, ion exchangers, adsorption and optional UV lamp, the Pacific TII produces pure water (ASTM type II) that meets the highest quality standards such as ASTM II, CAP, ISO 3696, CLSI and Bi distillate. Pacific TII is suitable for table or wall mounting. Three tank sizes 30 l, 60 l, or 100 l are available to match the range of permeate capacities of 7, 12 and 20 l/h. Upgrading the system and thus increasing the capacity for a growing pure water demand is possible at any time. Ideal for supplying ultrapure water systems, clinical analysers, reagent/dilution preparation and general chemical analysis.

Product features:

• Feed water (e.g. tap water) is pre-cleaned by reverse osmosis membrane. Via the pure water cartridge and optional UV unit the type II water ist temporarily stored in the storage tank. The optional recirculation of the water via the integrated pump ensures constant optimal water quality
• Flexible and compact laboratory system for optional mounting on the laboratory bench or with the integrated mounting bracket on the wall
• Simple and economical change of consumables due to separately exchangeable high-tech cartridges
• In the 4-line display numerous operating parameters, such as limit values, flushing cycles tank volume display in % can be easily set and queried
• The code-protected operating system as well as a high-precision conductivity monitoring in acc. with USP enable documentation acc. with GLP requirements
• Additional pressure booster system on the ultrapure water tank for supplying downstream devices (e.g. autoclaves, dishwasher, analyser)
• The scope of supply includes all necessary materials for immediate use: Integrated wall bracket, RO membrane, pure water cartridge, pressure reducer and UV lamp (for Pacific TII UV)

Drucklose Kunststoff-Patronen aus blauem Polyethylen gefüllt mit Qualitäts-Mischbett-Harzen inkl. analogem Leitfähigkeitsmessgerät, Schlauchverbindung und Wandhalterung (nur DI 425). Ideal zur Aufbereitung kleiner Wassermengen für Labors, Arzt- und Zahnarztpraxen, etc.
Die Vorteile:

• Bequeme Reinwassererzeugung direkt am Arbeitsplatz
• Einfachste Handhabung und höchster Nutzeffekt
• Keine Veralgung in der blauen Lichtschutzpatrone
• Reinwasserqualität: 0,1 bis 10 µS/cm

For safely and convenient storage of high purity water

• Large opening for easy and effective cleaning
• Vent filter with CO2 absorber to prevent conductivity increases from drawn-in CO₂
• Sterile overflow to prevent microorganisms from entering and contaminating reservoir water
• Constructed with inert materials opaque to light
• Recirculation pump protects high purity water from bacterial growth during standstill while maintaining a low conductivity value
• Simple and space-efficient wall mounting
• Conical bottom outlet for complete emptying
• Allows complete draining and efficient cleaning and disinfection

The LaboStar™ RO DI series produce high quality water with very low energy consumption. The use of "low energy" membranes enable a very efficient and economical operation. All LaboStar™ RO DI systems are equipped with a built-in 7 l storage tank. Pure water is collected in the tank and is recirculated by an integrated pump. LaboStar™ RO DI is equipped with a final DI cartridge. This cartridge polishes the RO water to Type II quality < 0.1 µS/cm. The unit offers two extraction ports: water can be extracted under pressure from the Point-of-use dispenser or from the outlet on the back of the unit. Optionally, a charged 0.2 µm sterile filter at the dispenser can be used to remove bacteria and endotoxins. An uncharged 0.2 µm sterile filter is also available. The 7 l storage tank capacity can be increased by an additional 30 or 60l tank. Pure water is collected in the tank and is recirculated by an integrated pump. LaboStar™ RO DI systems are delivered with the first set of all modules and filters required for immediate operation.

• Pure water circulation right into the dispenser head
• Easy to dispense water using the practical dispenser
• 0.2 µm sterile filter with or without endotoxinretention as availableoption
• Whisper operation mode
• Rapid and simple disinfection
• Conductivity monitoring of RO and DI water
• Easy module exchange via quick-release connections
• Small and compact

Several models with outputs from 20 to 100 l/hr that provide pure water supplies from 100 to 2400 litres per day. The application of low- energy- membranes ensures an efficient and economical operation.

Features:

• pure water treatment for simple analysis, laboratory rinsing machines, autoclaves, up to ultrapure water systems
• germ / pyrogen retention rate >99%
• modern, maintenance-friendly design
• modular flushing for long service life
• complete, connection-ready system; fittings allow supply tanks to be expanded if required (e.g. Ultra Clear™ RO supply tanks with 30, 60 and 80 litre capacities, larger tanks are available on request)
• menu-driven controller, RS232 interface
• Ultra Clear™ RO DI: includes post-treatment module for residual desalination of permeate Entrance- and Product water quality will be shown on the display.

The well-proven Ultra Clear™ RO range has been enhanced to peak water quality level in the plus series by adding electronic deionisation cells: accessory deionisers for removing inorganic materials from the output are therefore no longer required.
Technical parameters:

• Resistance up to 17 megohm (0.07µS/cm)
• TOC < 5 to 20ppb at RO cell output
• Typical pure water quality < 0.07µS/cm

• pure water treatment for simple analysis, laboratory rinsing machines, autoclaves, up to ultrapure water systems
• germ / pyrogen retention rate >99%
• complete, connection-ready system; fittings allow supply tanks to be expanded if required (e.g. Ultra Clear™ RO supply tanks with 30, 60 and 80 litre capacities, larger tanks are available on request)
• menu-driven controller, RS232 interface
• Entrance- and Product water quality will be shown on the display.

High quality stainless steel ion exchanger (V4A) pressure resistant up to 10 bar. High quality and longevity, parts in stainless steel in contact with medium. Optimized water distribution.
Without conductivity meter. Please order separately.

Der direkte Weg vom Leitungswasser zum Reinwasser (> 1 MOhm) sowie Reinstwasser (18,2 MOhm)
Laborwasserversorgung für einen Bedarf von bis zu 200 L/Tag. Das Thermo Scientific Barnstead LabTower EDI Standgerät ist ein modular aufgebautes Reinstwassersystem und wurde speziell für die funktionelle und wirtschaftliche Rein- und Reinstwasserproduktion entwickelt. Durch die Kombination verschiedener Aufbereitungstechnologien wie Vorbehandlung, Umkehrosmose, Elektroentionisierung, Reinstwassermodul und UV-Lampe produziert der LabTower EDI ein Reinstwasser, dass sogar höchste Qualitätsstandards wie ASTM I, CAP, ISO 3696, CLSI und aqua purificata übertrifft. Eine hochmoderne Mikroprozessor-Steuerung, der 100 l Reinwassertank mit Restentleerung, eine Druckpumpe sowie die Tankrezirkulation gehören bereits zum Standard. Montiert auf Rollen ist der kompakte und formschöne LabTower EDI die optimale Rein- und Reinstwasserversorgung für jedes Labor. Alle LabTower EDI Systeme werden für den sofortigen Einsatz geliefert mit: Reinstwasserkartusche, RO-Membran, RO-Vorbehandlungsfilter (5-µm-Filter und Wasserhärtestabilisator), EDI-Modul, UV-Lampe, 0,2-µm-Endfilter und Druckminderer.

Ausstattungsmerkmale:

• Hochleistungsfähiges Umkehrosmosemodul kombiniert mit einem EDI-Modul und einer Reinstwasserkartusche
• Reinstwasserentnahme Typ 1 über den Dispenser mit Endfilter direkt am System.
• Reinwasser vom Typ 2 kann aus dem integrierten 100-Liter-Tank entnommen werden und ist ideal geeignet für Laborgeräte wie z. B. Autoklaven oder Spülmaschinen.
• Der Tank ist ausgestattet mit einer Tankvolumenanzeige in Prozent, einem konischen Bodenablauf zur 100% Restentleerung, sowie einer Qualitätsrezirkulation über UV-Lampe zur Sicherung der Tankwasserqualität. Optionale Erweiterungsmöglichkeiten wie ein steriler Überlauf, sterile Belüftung + CO2-Adsorber, UV- Tauchrohrsystem mit 254 nm schützen vor Dekontamination und Keimwachstum
• Individuelle Anpassung des im Tank gespeicherten Volumens über die Steuerung
• Laborgerechte Überwachung und Dokumentation ermöglicht Ihnen nicht nur unsere hochpräzise, temperaturkompensierte Leitfähigkeitsüberwachung gem. USP 30 (645) mit exakter Temperaturanzeige, sondern auch ein potentialfreier Kontakt und eine RS-232 Schnittstelle mit Anschlussmöglichkeit für einen externen Datendrucker - Validierungs- und Qualifizierungsunterlagen sind optional erhältlich
• Auswahl zwischen zwei Systemen mit einer Kapazität von 15 oder 30 Litern pro Stunde
• Optionaler Handdispenser mit 3 m flexibler Zirkulationsleitung zur Ferndispensierung des Wassers. Kit enthält einen 0,2 µm Endfilter.

For pure water and ultra pure water Type I + II.
Delivers the complete laboratory pure water and ultra-pure water supply. The system complies with international water standards such as ASTM, ISO 3696 and CLSI. The economy of it is maximized by the inclusion of a continuously self-regenerating electrodeionizer. Further to this, each OmniaLab^ED+-system holds 100 litres of pure water type II ready for withdrawal in a storage tank that is equipped with quality recirculation. The flexible positioning of the purification modules enables OmniaLab^ED+ to be supplied as a tower-unit (mobile on castors) or, to save space, for fitting in a base cabinet. OmniaLab^ED+ is exactly right as pure water supplier to autoclaves, laboratory washing machines and the dipensing of type I ultra pure water for analytical and bioscience applications.

Application: Complete laboratory supply

For pure water and ultra pure water Type I + II.
OmniaTap is the ideal system when both pure water and ultrapure water are required, but in relatively small amounts. It provides both types from a single system. These also make it possible to connect the system directly to a drinking water tap. A touch on the flexible OptiFill dispenser button activates dispensing of ultrapure water type I via the digital dispenser control. The recirculation of the pure water held in the installed 10 litre tank keeps it permanently at type II quality.

Applications:
OmniaTap 12: AAS, IC, ICP, buffers and media preparation
OmniaTap 12 UV: Ultra-trace analysis, ICP-MS, HPLC, TOC-analysis
OmniaTap 12 UV/UF: Life science and microbiology, cell culture media

Scope of supply:
Ultra pure water system, filter cartridges, sterile filter capsule 0.2 µm

The Thermo Scientific Barnstead MicroPure system provides ultrapure water (18.2 MO, 0.055 µS/cm) ASTM type I, for typical demand up to 15 l/day. All MicroPure systems meet the requirements of the international standards ASTM (type I), ISO 3696 (type 1), ASTM D1193 and CLSI-CLRW. A variety of innovative expansion options, such as UV-lamp with wavelenghts 185/254 nm and a backwashable ultrafilter with a flow rate up to 0.6 l/min, ensure optimal supply for all analytical and life science applications.

MicroPure systems are supplied for immediate use with: pressure reducer, end filter, ultrapure water cartridge

Product features:

• Pre-cleaned feed water (e.g. reverse osmosis, destillation, demineralised water) is treated by a filtration cartridge and optional UV / UF units to produce ultrapure water
• Compact laboratory system for optional mounting on the laboratory bench or on the wall
• Simple and economical change of consumables due to easily accessible service hood and cartrige with quick release fasteners and AquaStopp
• Swivel-mounted display/keypad unit for setting and querying all operating and performance parameters such as limit values for ultrapure water quality
• MicroPure ST systems supplied with integrated 6 l tank for mobile use in the laboratory. Feed water supply with pre-cleaned water is provied by this tank

All Barnstead GenPure systems meet the requirements of the international standards ASTM type I, ISO 3696 type 1, ASTM D1193 and CLSI- CLRW. A variety of innovative expansion options, such as UV-lamp with wavelenghts 185/254 nm and UV-intensity monitoring, a backwashable ultrafilter, real time TOC monitoring, a remote dispenser xCAD (operating radius 80 cm) or a flexible (operating radius 60 cm) dispenser on the unit (GenPure Pro), ensure optimal supply for all analytical and life science applications. All GenPure systems are supplied with: Feed water pressure reducer, wall-mounting, ultrapure water cartridge, end filter, options - all available under one order number

Product features:

• Pre-cleaned feed water (e.g. reverse osmosis, destillation, demineralised water) is treated by a filtration cartridge and optional UV / UF units to produce ultrapure water
• Compact laboratory system for optional mounting on the laboratory bench, on the wall or with the optional dispensing unit xCAD under the laboratory bench
• Simple and economical change of consumables due to easily accessible service hood and cartrige with quick release fasteners and AquaStopp
• Integrated feed water monitoring with indiviually adjustable limit value ensures the purity grade of the product water and durability of the filter sets
• Swivel-mounted display/keyboard unit for setting and querying all operating and performance parameters (e.g. limit values for ultrapure water quality)
• USP-compliant conductivity measurement with auto-calibration
• Pre-settable dosing in the range from 0.01 to 65 l
• Accurate real-time TOC measurement at the sample point for continuous monitoring of the organic water constituents meets USP requirements
• Permanent UV-intensity monitoring and display in %, as well as UV operating hours counter with individual adjustable limit values

ASTM Typ1 water purification system for the high-end user. Whether for routine analysis or critical applications where reagent-grade water is required, the system consistently supplies high quality that is perfect for your applications. arium^® pro features a convincing innovative design, quality and ease of use. From the intuitive menu navigation to the operator friendly setup, all units in the arium^® pro series feature ultra easy operation and ultra high flexibility for producing laboratory-grade purified water. arium^® pro UV and pro VF water purification systems are also optionally available with an integrated TOC monitor for regularly checking the organic water constituents in product water. The TOC can be measured manually or automatically as required.

Areas of Application

• Atomic absorption (AA)
• Ion exchange chromatography (IC)
• High performance liquid chromatography (HPLC)
• Polymerase chain reaction (PCR)
• Inductively coupled plasma mass spectrometry (ICP-MS)
• Preparing cell culture media
• Protein purification
• Manufacturing reagents
• Preparing buffers and media
• Rinsing glass vessels

• Innovative glass operator interface with touch function
• Integrated TOC measurement (optional)
• Volume- and time-controlled dispensing
• Freely adjustable flow rates up to 2 L/min
• Conductivity measurement for feed and product water
• Integrated monitoring of water consumption
• Data logging on SD card and printer or PC
• Activatable PIN code for basic configurations
• Service and alarm functions supported by graphic displays
• Intelligent alarm system
• Compact design

The combination of sterile filter (0.2 µm) and CO₂ absorber prevents CO₂ from entering the storage reservoir (30 to 100 l) and extends the service life of the cartridge.

Bracket for space-saving storage of storage reservoirs on a wall.

Prevents the penetration of bacteria and other microorganisms. Suitable for all permeate flow rates.

Dishwasher salt to protect against limescale deposits.

For the separation of particles and microorganisms from pure water. The filter can be installed at the tapping points of water treatment systems.

• High water flow
• Hydrophil
• Incl. quality certificate

For the removal of ionic and organic contaminants down to trace levels.

Deionized and UV irradiated. Acc to DIN 43530 / EN 385. In plastic canister.